|
| 1 | Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 2 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. |
| 3 | All as per item No. 02above but fix in valley gutter / ridge/ view cutter,plain/corrugated. |
| 4 | Dismantling wrought iron or mild steel workof any description not otherwise provided for .complete all as specified and as directed by Engr-in-Charge. |
| 5 | S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and as directed by Engr-in-Charge. |
| 6 | M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. complete all as specified and directed. |
| 7 | M &L for two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, including preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and as directed by Engr-in-Charge. |
| 8 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 9 | M&L forbrick work with sub class \"B\" brick in cement mortar 1:6, straight or curved on planexc 6 m mean radius, complete all as specified and as directed by Engr-in-Charge. |
| 10 | Taking down cement plaster of any description on brick or stone walls/concrete surfaces, including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for rendering 15 mm thickin CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement all as specified and as directed by Engr-in-charge. |
| 12 | M&L for rendering 10 mm thick in CM 1:6 on new fair faces of brick work or concretesurface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge. |
| 13 | M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over and including 3 mm thick wall care putty and a coat of alkali resistance primer etc. complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for prepartion of newly plastered surface of wallapplying two coats on weatherproofacrylic emulsion exteroir grade paint on external surfaces includinga coat of alkali resistant priming paint complete all as specified. |
| 15 | Dismantling floor, hearth or walltilingmarble etc including cement mortar bedding and not backing including removing serviceable tiles to stores and rubbish off the premises. |
| 16 | M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in Sub base for leveling course complete all as specified. |
| 17 | M&L for Joint free Non - skid coloured Ceramic/ Vitrified tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 18 | All as per item No 17 but on skirting over 10 mm th rendering in CM 1:4 complete. |
| 19 | M&L for Joint free glossy vitrifiedcoloured tiles 10 mm thick Dark shade/ double charged (square/rectangular) polished area of each tile 1.00 sqm but n exc 1.50 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete |
| 20 | All as per item No 19 but on skirting over 10 mm th rendering in CM 1:4 complete. |
| 21 | M&L for joint free vitrifiedcoloured tiles10 mm thick double charged (square/rectangular) polished area of each tile 0.42 sqm but n exc 1.00 sqm as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4all as direced. |
| 22 | Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. |
| 23 | M & L for 2 level designs/ vertical design false ceiling with 10mm thick of panel size 600mm x 1200mm Gypsum sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 650mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface, fixing fibre mesh at the jointsand applying two coats of oil bound distemper over a coat of primer all complete all as specified and as directed by Engr-in-Charge.Make: Gyproc or Equivalent |
| 24 | M & L for Single layer designs/ vertical design false ceiling with 10mm thick of panel size 600mm x 1200mm Gypsum sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 650mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface, fixing fibre mesh at the jointsand applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge. Make: Gyproc or Equivalent |
| 25 | M & L for Single layer designs false ceiling with 10mm thick of panel size 600mm x 1200mm Gypsum sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 650mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface, fixing fibre mesh at the jointsand applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge. Make: Gyproc or Equivalent |
| 26 | S & F 25 mm thick PVC moulding patti fixing with fevicol or adhesive fixing on walls/ Ceiling complete all as specified and as directed by Engr-in-Charge. |
| 27 | S & F for WPC louvers white for bed back panels, vertical panels on walls etc.complete inclusive of necessary fixing and framing work for fixing as directed by manufacturer and Engr-in-charge. |
| 28 | S & F for WPC louvers in coloured for bed back panels, vertical panels on walls etc.complete inclusive of necessary fixing and framing work for fixing as directed by manufacturer and Engr-in-charge. |
| 29 | S & F, in repair 12 mm thick Prelaminated plywood board, exterior grade pre laminated, grade BWR, type BB with decorative choice laminatesas in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 30 | S & F, in repair 18 mm thick Prelaminated plywood board, exterior grade pre laminatedgrade BWR, type BB with decorative choice laminatesas in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 31 | S & F, in repair 25 mm thick Prelaminated plywood board, exterior grade pre laminatedgrade BWR, type BB with decorative choice laminatesas in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 32 | S & F, in repair 12 mm thick prelaminated plywood board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 33 | S & F, in repair 18/19 mm thick prelaminated plywood board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 34 | S & F, in repair 25 mm thick prelaminated plywood board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in wardrobe, kitchen cabinet, Drawers, Loft or fixed with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. |
| 35 | S & F External teak wood lipping 6 mm thick for 12 mm thick particles board, block board or veneered particle board fixed with nails.complete all as specified and as directed by Engr-in-Charge. |
| 36 | S & F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails.complete all as specified and as directed by Engr-in-Charge. |
| 37 | S & F External teak wood lipping 6 mm thick for 25 mm thick particles board, block board or veneered particle board fixed with nails.complete all as specified and as directed by Engr-in-Charge. |
| 38 | Taking down chowkatsnot exc 1.5 Sqmeach with shutter (Without taking off shutters from the frame) complete all as specified and as directed by Engr-in-Charge. |
| 39 | Taking down wooden chowkat or frames with shutter (w/o taking off shutter from frame) of areaexc 1.50 sqm and not exc 4 sqm each complete all as specified and as directed by Engr-in-Charge. |
| 40 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, choice decorative laminates on both side, commercial type on both side etc. complete all as specified and as directed by Engr-in-Charge. |
| 41 | S&F 125 mm SS powder coated \"W\"Butt hinges,medium weight cold rooled fixed with screw or welding complete all as specified and as directed by Engr-in-Charge. |
| 42 | S & F soft close SS hinges for wardrobe, cabinates, lofts etc.complete all as specified and as directed by Engr-in-Charge. |
| 43 | S & F Door lock premium brass with zinc coated material including 2 stylish handles, a brass lock body cylinder, covering plate, 3 computer brass keys and installation screws(8.5cm X 5 cm) etc. complete all as specified and as directed by Engr-in-Charge. |
| 44 | S & F Premium brass with zinc coated material 150 mm long extruded handle/ niche etc. complete all as specified and directed. |
| 45 | S & F Premium brass with zinc coated material tower bolt 150mm size. complete all as specified and as directed. |
| 46 | S & F250mm long Premium brass with zinc coated material sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section. complete all as specified and as directed. |
| 47 | S & F profile shutters doors incl aluminium frame 40x25 mm that holds panels of materials like glass, mirror,acrylic or laminates, tinted glass 5 mm thick etc. complete all as specified and as directedby Engr-in-Charge. |
| 48 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 49 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \" C \"Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.complete all as specified and as directed. |
| 50 | S & F three track sliding window including frame with two shutters with 4 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18 width aperature for mosquito proofing with good quality bearing handle, lock, rubber beading and glasing clips etc fabricated using following aluminium anodised sections confirming to catalogue of \"Jindal\" or of equivalent make complete all as spd and directed by Engr-in-Charge. (a) Bottom frame-20620 (b) Top & Vertical frame - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & bottom -20844 (f) Glazing clips - 19352 (Note :- Cost of tinted glass & wire cloth shall be included in the quoted rate of item) |
| 51 | Dismantlingof stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified. |
| 52 | M & L for 20 mm thick Granite (of any type) tilesmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over andincluding cement screed bed 15 mm thick in CM 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 53 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge. |
| 54 | Supply and fixing for Vitreous EWC with concealed single plate , concealed flush valve with flushing cistern white with and including fittingssuch as \"S\" trap distance pieces100 mm longetc complete all as specified and as directed by Engr-in-Charge.(make:Jaguar) |
| 55 | S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete all as specified and as directed by Engr-in-Charge.(make:Jaguar) |
| 56 | S & F in repairs countersunk Vitreous china wash basin white with cabin BWR laminates flat back size as approved by GE includingwaste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe etc. complete all as specified and as directed by Engr-in-Charge.(make: Cera/ Johnson/Jaguar) |
| 57 | S & F in repairs 15 mm Pillartaps fancy type long shank, swan neck cast copper alloy chromium platedwith crutch with butter fly handle, screwed for iron pipe or brass ferrule,complete all as specified and as directed by Engr-in-Charge. (make:Jaguar) |
| 58 | S & F in repairs 15 mm long body bib taps fancy type long shank cast copper alloy chromium platedwith crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge.(make: Jaguar) |
| 59 | M/L for CInahani trap incl jointing to waste pipe fixed in cement conc 1:2:4, type B2 75mm dia with gratings including taking down old broken traps complete all as specified and as directed by Engr-in-Charge. |
| 60 | S & F in repairs 15 mm dia anglevalves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed etc.complete all as specified and as directed by Engr-in-Charge.(make:Jaguar) |
| 61 | S & Fin repairfor PVC connection pipe 15mm dia with PTMT nuts of length 450 mm complete all as specified and directed. |
| 62 | S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified and as directed by Engr-in-Charge. |
| 63 | S & F in repairs 3 in 1Brass CP wallmixer for mixing hot & cold water screwed down for iron pipe or brass ferrule,including hand shower complete all as specified and as directed by Engr-in-Charge.(make:Jaguar) |
| 64 | S & F in repairs Chromium plated head shower rose 150 mm size with or without swivel joints, any size, including fixing tosteel pipe or union complete all as specified and as directed by Engr-in-Charge.(Make: Jaguar) |
| 65 | S & F complete shower panel incl all bathroom shower fittings etc. of Make:Jaguar complete all as specified and as directed by Engr-in-Charge.(Make: Jaguar) |
| 66 | S & F 125 mm ss grating with or without holescomplete all as specified and as directed by Engr-in-Charge. |
| 67 | S & F dressing table with modern organic shape looking mirror with size 1800mm x 750mm fancy type etcincluding all fittings complete. all as specified and as directed by Engr-in-Charge. |
| 68 | S & F dressing table with modern organic shape looking mirror with size 1000mm x 750mm fancy type etcincluding all fittings complete all as specified and as directed by Engr-in-Charge. |
| 69 | S&F, PVC cabinet fancy type of size 600 mm x 750 mm with looking mirror complete all as specified and as directed by Engr-in-Charge. |
| 70 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stonesbore of pipe 15mm etc all as specified and directed by Engr-in -charge. |
| 71 | All as per item No. 70 above but bore of pipe 20mm |
| 72 | Supplying and laying concealed 16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealed complete all as specified and as directed by Engr-in-Charge. |
| 73 | Supplying and laying concealed 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealedcomplete all as specified and as directed by Engr-in-Charge. |
| 74 | Dismantling water tanks and removing to site exc 500Ltr but nexc 1000Ltr capacity. |
| 75 | Supply & fixed rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes complete.(make: Syntex/ Finolex/ Prayag) |
| 76 | S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified and as directed by Engr-in-Charge. |
| 77 | S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 78 | S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed. |
| 79 | S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge. |
| 80 | S & F for 10/12 mm thick toughened glass with etching fixed with necessary Ozone patch touch fittings including openable door chamfered edge polishing as in bathing cubical / partitions including all fitting and fixture as per manufacture instructions etc. complete all as specified and directed by Engr-in-Charge. |
| 81 | S & F designed blinds for windows curtain etc. complete as approved by GE and all as specified and as directed by Engr-in-Charge. |
| 82 | Demolition ofconcrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) |
| 83 | S & Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. complete all as specified and as directed by Engr-in-Charge. |
| 84 | S & F forchromium plated two way bib cock with wall flange 15mm dia equivalent of make as per Appx \"A\" as approved by GE and all as specified and as directed by Engr-in-Charge.(make:Jaguar) |
| 85 | Taking down carefully old/ damaged/unserviceable copper/ aluminium pointwiring (light, fan, socket or power) complete, (fittings such as switchs, ceiling roses, pendents, regulators sockets etc. to be measured seperately), removing materials to store for keeping insafe custody for ruse at site and making good disturbed surfaces of wall, floors etc. comlete all as specified. |
| 86 | Taking down carefully fan any type complete deposited in MES E/M store complete all as specified. |
| 87 | Point wiring complete with 1.5 Sqmm two single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etc fixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including sunken type terminal box of suitable size with top cover for One Light/ Fan/6 Amps switch socket/ Bell controlled by one way switch complete all as specifiedMake : Finolex/Anchor/Polycab |
| 88 | All as per items No 87 but on same board. |
| 89 | All as per items No 87 but on independentboard. |
| 90 | Point wiring complete with 2.5 Sqmm two single core PVC insulated but unsheathed copper conductor FRLSH cable 650/ 1100 V grade drwn through concealed PVC conduit thickness not less than 1.8 mm of suitable size as per site requirement including tees, junctions etcfixed on wall/ floor/ ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including PVC/ Wooden/Modular metal type terminal box of suitable size with top cover for One Light/ Fan/6 Amps switch socket controlled by one way switch complete all as specified |
| 91 | Supply & Fix of Arteor modular mirror/graphic/wood/leather type, white/black/gold/metal finish color switch1 way, 6 Amps, 1 modue complete all as specified Make:Legrand/ Anchor Roma |
| 92 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Bell push switch 1 way, 6 Amps, 2 modue complete all as specified.Make:Legrand/ Anchor Roma |
| 93 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color switch socket 5 pin 6 Amps, 2 modue complete all as specified.Make: Legrand/ Anchor Roma |
| 94 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color switch socket 5 pin 6/16 Amps, combination type2 modue complete all as specified.Make: Legrand/ Anchor Roma |
| 95 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color Fan regulator 120 Watt2 module complete all as specified.Make: Legrand/ Anchor Roma |
| 96 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 1/2 module complete all as specified.Make: Legrand/ Anchor Roma |
| 97 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 3 module complete all as specified.Make: Legrand/ Anchor Roma |
| 98 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 4 module complete all as specified.Make: Legrand/ Anchor Roma |
| 99 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 6 module complete all as specified. Make: Legrand/ Anchor Roma |
| 100 | Supply & Fix of Arteor modular mirror/graphic/wood/ leather type, white/black/gold/metal finish color cover plate frame, 8/12 module complete all as specified. Make: Legrand/ Anchor Roma |
| 101 | Supply & fix of metal flush boxes mounting 1/2 module, made of MS chromium plated complete all as specified. |
| 102 | Supply & fix of metal flush boxes mounting 3 module, made of MS chromium plated complete all as specified. |
| 103 | Supply & fix of metal flush boxes mounting 4 module, made of MS chromium plated complete all as specified. |
| 104 | Supply & fix of metal flush boxes mounting 6 module, made of MS chromium plated complete all as specified. |
| 105 | Supply & fix of metal flush boxes mounting 8/12 module, made of MS chromium plated complete all as specified. |
| 106 | M & L for Modular Bell, Ding Dong AC. 230 volts, single pole fitting complete. Make- Legrand/ Standard/ Indoasian |
| 107 | M & L 3 terminals Ceiling rose, AC, 230 V, PVC/ polycarbonatecomplete all as specified. |
| 108 | Supply & fix in replacement of Modular USB socket of 2 module complete with input 250V & output is 12/24 V DCwith two USB cord arrangement complete all as specified. |
| 109 | Supply & fix in replacement of Modular chargeble Detachable Emergency lightcomplete with input 250V complete all as specified. |
| 110 | Material and labour for Sub-main wiring complete with 10 sqmm three single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 10 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. |
| 111 | Material and labour for Sub-main wiring complete with 6 sqmm two single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 6 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. |
| 112 | S & F of 12 way TPN DB made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 glazed door, confirms to IS-8623-1, IEC 61439-1&3, 415 v with 200 amps rated bus bar , ready to use DB insulated phase busbar, neutral bar\"s with shroud\"s, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for FP, MCB/ Isolator/RCCB/RCBO as incomer & SP MCB\"s as outgoing all as specified. |
| 113 | MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way |
| 114 | Supply & fixing in replacement of MCB TPN (3P+N), 415 Volts, 50HZ, 10KA Brecking capacity, C characteristics of capacity 63 Amp complete all as specified. |
| 115 | All as per item No 114 but MCB SPN 32 Amp, 250 Volts. |
| 116 | All as per item No 114 but MCB SPN 40 Amp, 250 Volts . |
| 117 | Supply & fixing in replacement of MCB SP 250 Volts, AC, 50 HZ, 10 KA, C/D Charactristic of capacity 6-32 Amp complete all as specified. |
| 118 | Supply & fixing in replacement of old tube light fitting with newLED 20W tube light polycarbonate fixture including fixing arrangement and also incl. accessories, high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified and directed. Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 119 | Supply & fixing in replacement of LED Decorative wall mounted dia-cast Al LED fixture with ivory/white/Gold coating for up-down accent lighting in the module of Xing Hexa/ Penta/ Round/ Square/OVAL of capacity 14/18 Watts complete high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver all as specified.Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 120 | Supply & fixing in replacement of LED BED Lamp fitting polycarbonate fixture with easy bending to as per requirment including fixing arrangement and also incl.accessories, high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified for 12 watts LEDs.Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 121 | Supply & fixing in replacement of LEDRecessed mounteddown luminair 18 watts Al die cast ed COB fixture in white/ Al, brush finish & complete with electronic driver suitable for MR16 application with 36 degree beam angle and high brightness SMD LEDsP.F. > 0.90, complete all accessories, all as specified. |
| 122 | Supply and fixing non integral flexible LED strip 25 W light with high brightness for indoor/outdoor application with including driver 25w with all accessories all as directed.Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 123 | Supply and fixing25 w driver forLED strip 25 W light with high brightness for indoor/outdoor application with completeaccessories all as directed.Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 124 | Supplyandfixing of sensor pressure pump of0.5 hp all as per directed |
| 125 | Supply and fixing LED luminaire, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete as per directed by Engr-In-Charge.Make : Crompton/Phillips/ Jauquar or in equivalent. |
| 126 | S/F in repair Meter box 2mm thick MS sheet powdr coated of size1mtr x 1mtr X 0.25mtr split in two parts 0.4X 1 mtr on top for refixing the meters and 0.6 X 1 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as theMCBs can be operated form out side including removing and refixing of meters (4 Nos) and supply and fix the following:-MCCB TPN-100 Amps ,10 ka 440 V- 01 Nos MCB SPN 240 Volts 40 Amps including connections complete from electric meter - 04 Nos Note:rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators etc and making good the disturdbed surface to match with the existing. |
| 127 | M& L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr deep wire 4.0 mm dia by means of bolts , nuts, check nuts, and washer of galvanisediron or steel all as shown in electrical plate No-3 SSR Part-1 of2009 connecting to earthing test point all as specified anddirected ,including necessary excavation and earth work in any type of soil ,concre pit CI frame and cover with locking arrangement all as specified and directed by Engr- In- charge. Note: Rate quoted deemed to be includingexcavation by compressor M/C for Soft disintegrated rock to required depth. |
| 128 | M & L for DWC pipe of pressure rating 6 kgf / cm2 fixed/ laid in complete to walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- |
| 129 | 50 mm dia |
| 130 | 80 mm dia |
| 131 | S & Laying in repair/ replacement cable XLPE insulated screened PVCbedded ,galvanized steel strip or wirearmoured ,electric power cableheavy duty1100 voltsgrade with strandadaluminum conducter of followingsizes:- |
| 132 | 10 Sqmm x 4 Core |
| 133 | 50 sq mm x 3.5 core |
| 134 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :- |
| 135 | Soft / loose soil |
| 136 | Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cmall as specified and directed. |
| 137 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge. |
| 138 | M&L for road cutting and making good with PCC 1:3:6 type C-2(using 40 mm graded stone aggregate) complete all as directedby Enger -in- charge. |
| 139 | Supply and fixing ceiling fans decorative type with remote control complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). MAKE- Almonard/crompton/ bajaj. |
| 140 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mmwith complete accessores. MAKE- Almonard/crompton/ bajaj. |
| 141 | Supply and fixing inverted pyramid tripod type 10 watt LED Bollard pressure die cast powder coated housing withdiffuser ofIP 65 protection CAT NO LBLSN-10-WW of Crompton or Equivalent in havells/bajaj with including junction box for connection and PCC work of fixing of light fittings.Make : Crompton/Phillips/ Jauquar or in equivalent. |
