|
| 1 | Demolition of cement concrete (un-reinforced) of any description as in, existing roof treatmentconcrete tiles ,oldroofmembrane etc,.any type complete all as specified and directed |
| 2 | M & L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) 40mm thickas in sub base/roof padding concrete in roof etccomplete all as specified and directed. |
| 3 | M & L forrendering 10mm thick in CM 1:3 finished even and smooth using extra cement with liquid water proofing compound slab treatment as in sunken slab plaster complete all as specified and directed. Note : Water proofing compound measured and paid seperately. |
| 4 | Supply only integralliquid water proofing compound . |
| 5 | Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 6 | M & L for Rendering 15mm thick in CM 1:3 on concrete masonary or surfaces other than fair face of brick work with water proofing compound finished fair and even without using extra cement. ( water proofing compond shall be measured & paid seperately) |
| 7 | M & L for cement concrete tiles with grey cement & no pigment, size 25 cm x 25 cm x 22 mm thick machine pressed set jointed and pointed while laying the tiles, care should be taken to see that joints between tiles are kept minimum and joints are thoroughly filled with FOSROC Nitotile grout polymer based joint motor or equivalent products of Asian Paints/SIKA/Pidilite Dr Fixit/Thermax /STP applied as per manufacturer\"s Instruction in floors and cut and polished with grey cement and no pigment over and including 15 mm thick screed bed or bedding layer in cement mortor 1 :4 complete all as specified and directed. |
| 8 | Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminatin strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction.( Note:- work to be carried out by authorities applicator of M/S Asian Paints /STP/SIKAor equivalent company.) |
| 9 | S & Fin repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 10 | S&F in repairs32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 11 | S&F in repairs40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 12 | Removing of existing water pipe line of 20 mm diasetting aside or lowering if required , and refixing the same into new or exisiting position with suitable clamp or fixing arramgements complete all as specified and directed. |
| 13 | Removing of existing water pipe line of 25 to 32 mm diasetting aside or lowering if required , and refixing the same into new or exisiting position with suitable clamp or fixing arramgements complete all as specified and directed. |
| 14 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 1000litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank1000 litre capacity and removing to store complete all as specified and directed. Make : SintexPolycon, Rotex |
| 15 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 500litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank500 litre capacity and removing to store complete all as specified and directed. Make : SintexPolycon, Rotex |
| 16 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in exisiting/ newposition complete all as specified and directed. |
| 17 | S & F in repairs 40 mmouter diaball/gate valve screewd both ends for CPVC pipes and fixed complete all as specified and as directed |
| 18 | S&F in repairs 32 mmouter diaball /gate valve for , screewd both ends for CPVC pipes and fixed complete all as specified and as directed |
| 19 | S & F in repairs Ball valves high 25mm borepressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 20 | S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 21 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilingscomplete all as specified and directed. |
| 22 | S&F in repairs PVC bends of 110 mm dia complete all as specified and directed. |
| 23 | S&F in repairs PVC bends of 75 mm dia complete all as specified and directed. |
| 24 | S&F in repairs PVC (SWR) floor trap, plainwith grating including jointing with solvent cement bends of 75 mm dia complete all as specified and directed. |
| 25 | M&L for Pre-cast cement concrete block masonry type C1, mix 1:3:6 (using 20 mm graded stone aggregates) with solid blocks, exc.10cm in width and setting in mortar including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directedcomplete in CM 1:6 all as specified and directed. |
| 26 | Demolition of Concrete of any description (reinforced) and in any position not otherwise specifically provided for all as specified. |
| 27 | M & L PCC Coping Type B0, mix 1:2:4 (using 12.5 mm graded stone aggregate )in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, as directed |
| 28 | Material and Labour for rendering 15mm thickin CM 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 30 | M & L for preparation of newsteel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 31 | Excavating in trenches in Hard/dense soilnot exc 1.5 meter wide and not exc 1.5 meter depth for foundation etc and getting out complete all as specified and directed. |
| 32 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n.exc 25cm in Hard/densesoil. |
| 33 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point. |
| 34 | M&L for Hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 35 | M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in Sub base forconcrete. |
| 36 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than .034 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 complete all as specified and directed . |
| 37 | M&L for Kota stone slab 20-25mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10 mm thick CM (1:3) to receive Kota Stone complete all as specified and directed |
| 38 | M & L Joist, channel, angle, tubes or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) ®c complete using EWR or inducton butt welded tubes conforming to Fe410-W (Gde- E-250) quality Acomplete all as specified and directed. |
| 39 | M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete ll as specified and directed |
| 40 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 41 | S & F Welded steel wire fabric n exc 4 kg per sqmtrfixedto wood or steel members by welding or screwing by using clamps hooks, self tappinf screws all as specified and directed. |
| 42 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed. Note:- The profile of sheet shall be as per sample kept in GE\"s office. |
| 43 | M&L for 1:3:6 type C1 with 20mm graded stone aggegate Pre-cast cement concrete block masonry with solid blocks, exc.10cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 44 | M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfacesover a coat of alkali resistant primer complete all as specified and as directed. |
| 45 | M & L Preparation of new plastered surface andapplying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfacesover a coat of alkali resistant primer complete all as specified and as directed. |
| 46 | M & L for Complete removal of existing treatment of wall surfacesincluding washing, rubbing down and stopping of distempered surfaces and applying two coat of oil bound distemperover 2 to 3mm thick wall care putty complete all as specified & directed. |
| 47 | M & L 50 mm thick precast cement concrete louvres and jallies,of any approvedpattren, design ,Type B0 (mix 1:2:4)using 12.50 mm graded stone agregates,set in CM 1:4 (measured solid), including all mouldings fixing with self adeshive cement , filling up joints with appropriate items to match existing surface, complete all as specified and directed. |
| 48 | Demolition of unreinforced cement concrete in ground floors etc and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 49 | M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in level course of flooring complete all as specified and directed . |
| 50 | M & L vitrified ceramic tiles coloured pattern as required (Dark shade) 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and includinglaid over15 mm thick screed bed in CM 1:4 compete all as specified and directed . |
| 51 | All as per item No. 50 above but on skirting over 10 mm thick backing coat in CM 1:3including dismantling of tiles complete all as specified and directed . |
| 52 | S & F in repairs20 mm CPVC PipeSDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenchesor fixed to wall/Ceilingcomplete all as specified and as directed |
| 53 | S&F in repair 15 mm aerated bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 54 | S & F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605 mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden/steel/concretesurface/ member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling baords of any description of any thickness incl cover fillets complete all as specified and directed . |
| 55 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed. |
| 56 | M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC casing& caping of suitable size, complete with all PVC casing &caping accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc,including all cutting/chases etc in wallsand including continuousearth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:-(a)One light point controlled by one switch. |
| 57 | Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed |
| 58 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed. |
| 59 | M & L for18 to 20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado or cooking platform, similar worketclaid over cement screed bed 15 mm thick in CM 1 : 4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 60 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 61 | Dismantling of floor hearth or wall tiling, terrazo tiles of anmy thickness including cement mortar bedding (but not backing) removingtilesand rubbish off the premises. |
| 62 | M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces350 x 250x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mmthick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed. |
| 63 | M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. |
| 64 | S & F in Repairs Vitreous China half stall urinals,(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 65 | Taking down chowkhats or frames with shutters (without taking offshutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed . |
| 66 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 67 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 68 | Taking down steel windowscompletely of size not exc 1.00 Sqm each |
| 69 | S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 70 | S & F Powder coatedAnodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutterwithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separatelyin supply only item. |
| 71 | Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed |
| 72 | Supply only4mm thick figured galss, pin head typeasin louvers, fixed glazing not exc 0.5 Sqm in each pane |
| 73 | S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed. |
| 74 | Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified |
| 75 | Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified |
| 76 | S & F PVCwaste pipe, 32 mm dia,750mm long, suitable for Kitchen sink,fixed in repairs all as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware |
| 77 | S & F in repairsBib taps,CP brass, fancy type, long body with flange,screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed. Make :Jaquar (CAT PartNo COP-107PM ), and equivalent of Hindware. Cera, Parryware |
| 78 | S&Fin repairs fancy type CP brass angle cock of brass chromium plated with ling shank screwed for pipe and fixed 15mm bore fixed to iron pipen all as specified Make :Jaquar (CAT Part No COP-057PM) and equilent of , Hindware. Cera, Parryware |
| 79 | S & F in repairsHealth faucet, CP,with 1.5 metre flexible tube with wall hook, (ABS body) 8 mm dia spirochrome flex tube & wll hook,all as specified and as directed. Make :Jaquar (CAT Part No ALD-587) or equivalent of , Hindware. Cera, Parryware |
| 80 | S & F in repairs CP brassAerator Pillar taps brass chromium plated, fancy type/swan neck typefoam flow,screwed down high pressure screwed for iron pipe 15mm bore, fixedall as specified and as directed.Make :Jaquar (CAT Part No COP-011PM) or equivalent ofHindware. Cera, Parryware |
| 81 | S & Fin repairs S/S Toilet paper holderwith flat recessed type complete all as specified. Make :Jaquar , Hindware. Cera, Parryware |
| 82 | S & Fin repairs brass chromium platedtubular towel rail 20mm dia D type60cm ling between flanges complete all as specified and directed.Make :Jaquar , Hindware. Cera, Parryware |
| 83 | S&F in repair CP towel Ring Square with Round Flange, Cat Part No-ACN-1121N, complete all as specified and directed . MAKE:- JAQUAR |
| 84 | S&F in repair CP Soap DishHolder, Cat Part No-AKP-35731P, complete all as specified and directedMAKE:- JAQUAR |
| 85 | S & Fin repairs Mirror cabinet 622x422mm all as specified and as directed.Make :Jaquar , Hindware. Cera, Parryware |
| 86 | S & F in repairssheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and directed. Make :Jaquar , Hindware. Cera, Parryware |
| 87 | S & Fvitreous china wall hung WHB with fixing accessories of size560x415x200mm Jaquar CAT Part No CNS-WHT-801)with CP brass waste coupling, Jaquar (CAT PART No ALD-705) , waste pipe andfull Pedestal(jaquar (CAT Part No -WHT-301 )all as specified and as directed. Make :Jaquar , or equient of Hindware. Cera, Parryware |
| 88 | S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover,including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete,including fixing of PVC flush tank and seat cover as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware |
| 89 | Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed allas specified and as directed. (Note: Seat cover make should be same as of WC make)Make :Jaquar , Hindware. Cera, Parryware |
| 90 | Supply only PVC low level flushing cistern, 10 litres capacity,with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware. |
| 91 | S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs,all as specified and as directed. |
| 92 | S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 93 | S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 94 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. |
| 95 | S&F in repairs PVC (SWR) junction(Double T) equal or unequal fixed to 75mm bore of pipes with access door all as specified and as directed. |
| 96 | S&F in repairs PVC (SWR) junction(Double T) equal or unequal fixed to 110mm bore of pipes with access door all as specified and as directed. |
| 97 | S & F Stainless steel gratings with frame, 100 mm dia,with/withouthole for waste pipe connection all as specified and as directed. |
| 98 | S&F in repairs PVC (SWR)vent cowl fixed to 110mm bore of pipes all as specified and as directed. |
| 99 | S&F in repairs PVC (SWR)vent cowl fixed to 75mm bore of pipes all as specified and as directed. |
| 100 | M&L for preperation of newly plastered surfaces of wallsand applying two coats of oil bound distemper on wall surfacesover a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed. |
| 101 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
