|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Material and Labour for Non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not excceding 0.11 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 3 | Material and Labour for Non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 4 | Material and labour for glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm in vertical surface such as dados, set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 5 | Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 20mm thick in CM 1:4 complete all as specified and as directed. |
| 6 | Material and Labour for Vitrified ceramic tiles 10mm thick (square/rectangular) light coloured area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete complete all as specified and as directed. |
| 7 | Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level) complete all as specified and as directed. |
| 8 | Material and labour for 150mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base including necessary form work complete all as specified and as directed. |
| 9 | Material and labour for 80mm thick machine pressed precast concrete interlocking paver block, any shape and size of M-40 grade conforming to IS 15658-2006 with grey cement and pigment laid over and including 50mm thick river sand cushioning, watering and consolidation in the same position complete all as specified and directed. |
| 10 | Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm with grey cement and pigment,hydraulically machine pressed, set, jointed and pointed in neat cement slurry to match colour of tiles, over and including 15mm thick screed in CM 1:4 in floors complete all as specified and as directed. |
| 11 | Material and labour for Plain cement concrete 1:3:6, type C1, using 20mmgraded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fastincluding necessary form work all as specified and as directed. |
| 12 | Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using40 mm graded stoneaggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed. |
| 13 | Dismantling of Stone slabs and granite laid, bedded and pointed inany mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and as directed. |
| 14 | Material and Labour for Granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laidover and including 20mm thick cement mortar 1 :4 complete all as specified and directed. |
| 15 | Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed. |
| 16 | Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqmin each and removing as directed. |
| 17 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from sitecomplete all as specified and directed. |
| 18 | Supply and Fix PVC door frame size 50mm x 47mm made out of 5mm single sideprelam PVC sheet and edges will be painted to match with prelaminated sheetreinforced with MS square tube supplying& fixing in opening as per specification complete all as specified and directed. |
| 19 | Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frameat site as per specification and drawing given in SSR Part-II complete all as specified and as directed. |
| 20 | Material and labour forsecond class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints,fixed to wall and making good to wall all as specified and directed. |
| 21 | Supply and fix mild bands, stapes, supports for hold fast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 22 | Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 35mm thickwith lock rail and with panels of timber flat on both edges(feather edged) or 12mm thick commercial veneered particleboard veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressuretreated complete all as specified and asdirected. |
| 23 | Supply and Fix 1st class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (withoutsash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 24 | Supply and fix100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed. |
| 25 | Supply and fix 75mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed. |
| 26 | Supply and fix aluminum handle fabricated type anodised of size 150mm complete all as specified and directed. |
| 27 | Supply and fixaluminum handle fabricated type anodised of size 100mm complete all as specified and directed. |
| 28 | Supply and fixaluminium anodisedbarrel tower bolt of extruded section of size 150 mm complete all as specified and directed. |
| 29 | Supply and fixaluminium anodisedbarrel tower bolt of extruded section of size 100 mm complete all as specified and directed. |
| 30 | Supply and fix 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast-aluminium alloy and fixed complete all as specified and directed. |
| 31 | Supply and fix in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directedincluding taking down old unserviceable one. |
| 32 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directedincluding taking down old unserviceable one. |
| 33 | Supply and fix in repairaluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Glass panel/particle board panel filling shall be measured and paid separately. |
| 34 | Supply and fix in repair powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 35 | Supply and fix in repair for powder coated,Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified.Note: Glass pane shall be measured and paid separately. |
| 36 | Supply and fix in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern of DG 102, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement, specified and directed. |
| 37 | Supply and fix in repairs door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 38 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: SANDHU, EVEREST |
| 39 | Hacking out old broken glass any thickness, size and quality from wooden frames or stone, concrete of brick surrounds, glazed with putty or beads all as directed. |
| 40 | Supply and Fixing in repair5.5 mm thick sheet glass tinted in square exceeding 0.5 Sqm in each pane for fixing in aluminium joinery including necessary beading as specified and as directed. |
| 41 | Supply and Fixing in repair 3 mm thick sheet glass tinted in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery including necessary beading as specified and as directed. |
| 42 | Supply and fixin repair 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed. |
| 43 | Supply and fixin repair 75mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed. |
| 44 | Supply and fixin repair aluminum handle fabricated type anodised of size 150mm complete all as specified and directed. |
| 45 | Supply and fixin repair aluminum handle fabricated type anodised of size 100mm complete all as specified and directed. |
| 46 | Supply and fixin repair aluminium anodisedbarrel tower bolt of extruded section of size 150 mm complete all as specified and directed. |
| 47 | Supply and fixin repair aluminium anodisedbarrel tower bolt of extruded section of size 100 mm complete all as specified and directed. |
| 48 | Supply and fix in repair 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast-aluminium alloy and fixed complete all as specified and directed. |
| 49 | Supply and fix in repair Harrison rails, mild steel, chromium plated with fixing brackets stopsrollers etc. including taking out old railcomplete all as specified and as directed. |
| 50 | Supply and fix second class soft-wood (clean sawn) timber fixedin scantling including dismantling old unserviceable wood work complete all as specified and directed. |
| 51 | Supply and fix 2nd class soft-wood plain fillets, square, rectangular or triangular in section exc 13 and not exc 25 sq. cm clean sawn, secured with nails or brads including taking out old fillets complete all as specified and directed. |
| 52 | Supply and fix 2nd class softwood fillets bullnosed, splayed, chamfered or rounded on one edge or face, squares, rectangular or triangular in section exc 3 & n exc 6 sq cm fixed with screws including taking out old fillets complete all as specified and directed. |
| 53 | Supply and fix 19/18 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including taking out old fillets complete all as specified and directed. |
| 54 | Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primerincludingpreparation of new wooden surface all as directed and as specified. |
| 55 | Material and labour for preparation of old wooden surfaces of any description, not otherwise described,over 10cm width or girth andapplying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 56 | Material and labour for preparation of old steel surfaces of any description, not otherwise described,over 10cm width or girth andapplying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 57 | Taking down steel/CPVC tubing and connections, including cleaning for refixing or removal to store of 15mm dia pipe complete all as specified and directed. |
| 58 | Taking down steel/CPVC tubing and connections, including cleaning for refixing or removal to store of 20mm dia pipe complete all as specified and directed. |
| 59 | Supplying and laying 15/16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and as directed. |
| 60 | Supplying and laying 20 mm inner dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings complete all as specified and directed. |
| 61 | Supply and fixing in repairsVitrious China squatting pan \" Orissa\"pattern of size 580 mm x 440 mm white with integral foot rest excluding flushing cistern and flush pipe including P or S trap making good the floor to match with existing floor complete all as specified and as directed. |
| 62 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 63 | S&F in repairswash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified. |
| 64 | Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed. |
| 65 | Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 66 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 67 | Supply and fix in repairs 15mm dia bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down , screwed for iron pipe or union complete all as specified and directed. |
| 68 | Supply and fix in repairs 15mm dia stop valves cast copper alloy, Fancy type, chromium plated with long shank and cup (concealed type) screwed down high press with crutch or butterfly handle both ends for iron pipe complete all as specified and directed. |
| 69 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 70 | Supply and fix in repairs vitreous china wash basin, white flat back of size 550x 400mm including PVC waste pipe 600mm long, PVC connection 300mm long and chromium plated waste coupling of size including brackets cutting and pinning in ends of brackets complete complete all as specified and directed. |
| 71 | Supply & Fixing in repairs Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed. |
| 72 | Supply & Fixing in repairs 15mm bore dia Pillar taps,fancy type cast copper alloy CP with capstan heads , cromium plated screwed down, high pressure with or without letters cold or hot with longscrewed shanks and fly nuts screwedfor iron pipeand fixed complete all as specified and directed. |
| 73 | Supply and fix in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 74 | Supply and fix in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gm) complete all as specified and directed. |
| 75 | Supply and fix in repairs 450mm size Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gm) complete all as specified and directed. |
| 76 | Supply and Fix in repairs 600mm x 450mm bevelled edge mirror or selected quality glass mounted on 6mm thick AC building board with commercial ply wood and fixed to teak wooden plug with chromium plated brass screws complete all as specified and directed. |
| 77 | Supply and fix in repairs tubular towel rail, aluminium anodised 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 78 | Supply and fix in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 79 | Supply and fix in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 80 | Supply and fix in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 81 | Supply and fix in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and directed. |
| 82 | Supply and fix in repairs PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal complete all as specified and directed. |
| 83 | Supply and fix in repairs PVC (SWR) junction single, (Double Y) 75 mm bore equal or unequal complete all as specified and directed. |
| 84 | Supply and fix in repairs PVC (SWR) vent cowl 110 mm bore equal or unequal complete all as specified and directed. |
| 85 | Supply and fix in repairs PVC (SWR) vent cowl 75 mm bore equal or unequal complete all as specified and directed. |
| 86 | Demolition of brickwork or stone/boulders masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 87 | Material and Labour for providing precast cement concrete type C1, 1:3:6 (20 mm graded stone aggregate) solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 88 | Taking down cement plaster on brick or stone/concrete walls etc including raking out joints, hacking for key, scrubbing down with water etc of any description complete all as specified and directed. |
| 89 | Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 90 | Material and Labour for rendering 10mm thick on fair faces of concrete work in CM 1:4,using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately |
| 91 | Supply only integral water proofing compound all as specified and as directed. |
| 92 | Material and Labour for preparing of new surfaces of any description and applying two coats of oil bound distemper,over a 3mm wall putty to achieve smooth surfaces on plastered wall surface complete all as specified and as directed. |
| 93 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces. |
| 94 | Material and labour for preparation of new surface of old surfaces of ceiling and applying two coat of white wash complete all as specified and as directed. |
| 95 | Material and labour for one coat ofwhite washon old ceiling surfaces including necessary preparation all as specified and as directed |
| 96 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 97 | Dismantling of water tanks of capacity exceeding 500 ltrs and not exceeing 1000 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge. |
| 98 | Supply and fix Rotational moulded polyethylene water storage tanks having capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including taking down unserviceable tank all as specified and directed. |
| 99 | Demolition of reinforced cement concrete of any description ad in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 100 | Material and Labour for rendering 10mm thick on fair faces of concrete work in CM 1:3 mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturers instruction, surface finished even & smooth without using extra cement including curing the plastered surface complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid separately. |
| 101 | Material and labour for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs coving over chajjas and similar locations rounded or chamfered on edges complete all as specified and directed. |
| 102 | Material and labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3.5kg/sqm, reinforced withnon woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied bytorch-on application including minimum 10 cmover lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminiumpaint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed. NOTE: (i) All necessary safety measures shall be ensured by the contractor during execution of work at site and quoted rate shall be deemed to be inclusive of the same. |
| 103 | Material and labour for roof tiles, Mangalore pattern, interlocking at side laid dry complete all as specified and as directed. |
| 104 | Material and Labour for cement mortar band in CM 1:6 of size width 70mm at bottom 25mm at top and 40mm thickat 30 cm centre to centre for laying of mangalore pattern tiles complete all as specified and directed. |
| 105 | Material and labour for reinforced cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed. |
| 106 | Supply and fix Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B as in bracing members etc complete including necessary cutting , welding in any shape and in any position / direction in hangar doors etc complete all as specfified and as directed by the Engineer-in-Charge. |
| 107 | Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested for 150mm diapipe and testedcomplete all as specified and as directed. |
| 108 | Supply and laying Reinforced cement concrete hume pipes class NP2, laid and jointed complete with one collar per length of pipe, dia 150 mm complete all as specified and as directed. |
| 109 | Taking out RCC cover slab of septic tank of any capacity carefully and taking out sludge including bailing out foul water, collect sludge in closed container and removing night soil & sediments& disposing off out side MD land, cleaning the external surfaces with fresh water & fixing the manhole covers including disposal of sludges/water out side MD land complete all as specified and as directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris etc. |
| 110 | Cleaning of sewage lines of any description and dia from manhole to manhole by rodding from one man hole to next man hole, washing thoroughly with fresh water and removing all sludges from the sewage lines including removing existing man hole covers and refixing properly after cleaning and disposal of sludges out side MD landcomplete all as specified and as directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris. |
| 111 | Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking out old railing complete all as specified and directed. |
| 112 | Schedule of Credit (Minus) Rs.51925.00NOTE: Bidder shall insert credit amount of Rs. 51925.00 as ratein Green field under Col-13. |
