|
| 1 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing sheet complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws including taking down existing sheet complete all as specified and directed. directed. |
| 4 | M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc13 sq.cm & n exc 25 sq.cm)as in studs of ceiling / sunshed./truss members including dismantling of existing surface complete all as specified and directed. |
| 5 | All as per item above but (sectional area exc6 sq.cm & n exc 13 sq.cm) asin ceiling/ jali window frame/bird proof including dismantling of existing surface complete all as specified and directed. |
| 6 | M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,wrought ,secured with nails or bradsbut (sectional area exc 3 Sqcm &n exc 6 sq.cm) in filet etc including dismantling of existing surface complete all as specified and directed. |
| 7 | S&F wire netting of stainless steel wire 1.40 mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. |
| 8 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.00mm with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 9 | M&L for 40mm thick hard wood planed at both sides boarding as in joist of ceiling, rafters, truss and members including dismantling of existing surface complete all as specified and directed. |
| 10 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washersetc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 withone shop coat of zinc chromate primer paint including dismantling of existing surface complete all as specified and directed. |
| 11 | S&F Fe 410-W (Gde-E-250) qualitymild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of existing surface complete all as specified and directed. |
| 12 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm including dismantling of existing surface complete all as specified and directed. |
| 13 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, including dismantling of existing surface complete all as specified and directed. |
| 14 | M&L for 25 mm thick cement concrete (1:2:4) type B1 (20mm graded stone aggregate) as in floor finished rough to receive floor finishes including dismantling of existing surface complete all as specified and directed. |
| 15 | M&L for20-25mm thick machine cut kota stone slab flooringover 15mm thickscreed bed or bedding layerslaying in CM (1:6) for floor finishes to receive kota stone laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing including dismantling of existing surface complete all as specified and directed. |
| 16 | -ditto - but as in skirting/dado but over 10 mm thick rendering over CM 1:4 complete all as specified and directed. |
| 17 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing surface complete all as specified and directed. |
| 18 | M&L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screedbed in CM 1:6including dismantling of existing surface complete all as specified and directed. |
| 19 | S&F anodised GI snap grid (Size of grid 605mm x 605mm) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framingincluding taking down existing surface complete all as specified and directed. |
| 20 | S&F 4 mm thick Non asbestos fibre cement building board decorative type (e-board)fixed in aluminium snap grid frame work with screws including taking down existing surface complete all as specified and directed. |
| 21 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including dismantling of existing surface complete all as specified and directed. |
| 22 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling of existing surface complete all as specified and directed. |
| 23 | M&L for rendering 15 mm thick,in CM 1:6. on fair faces of brick work or finished concrete surfaceseven & smoothwithout using extra cementincluding taking down existing surface complete all as specified and directed. |
| 24 | M&L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in cm (1:4) on fair faces of brick work or concrete surface including taking down existing surface complete all as specified and directed.Note : water proofing compound shall be measured and paid separately). |
| 25 | Supplied only integral waterproofing liquid complete all as specified and directed. |
| 26 | M&L Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste including taking down existing surface complete all as specified and directed. |
| 27 | M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6) including taking down existing surface complete all as specified and directed. |
| 28 | M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6) including taking down existing surface complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 30 | M&L plain cement concrete type 1:3:6 type C2( 40mm agg) in foundations, filing & mass concrete complete all as specified and directed. |
| 31 | M&L including preparation of new or previously untreated steel surfaces of any descriptionover10 cm width or girth and applying two coats of synthetic enameled paint over one coat of red oxide primer complete all as specified and directed. |
| 32 | M&L including preparing of new plastered wall surface and treated with three coat white wash on it complete all as specified and directed. |
| 33 | M&L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in cm (1:4) on fair faces of brick work or concrete surface complete all as specified and directed.Note : water proofing compound shall be measured and paid separately). |
| 34 | Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed. |
| 35 | M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection/paving finish even and smooth without using extra cement including dismantling of existing surface complete all as specified and directed. |
| 36 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade \"B\" complete all as specified and directed. |
| 37 | M&L Chequered cement concrete tiles 30 cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment,glossy finished type over 15mm thick screed in CM(1:4)complete all as specified and directed. |
| 38 | M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed. |
| 39 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.complete all as specified and directed. |
| 40 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified and directed. |
| 41 | M&L for Granite (of any type)slab 20-25 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone indluding grindingand polishing complete all as specified and directed. |
| 42 | M&L for Granite (of any type)slab 20-25 mm thick machine cut, in skirting / dado laid over cement screed and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone including grindingand polishing complete all as specified and directed. |
| 43 | M&L for 2 nd class hard wood scantling wrought finishedin any position over and 40 sq. cm & over in section,complete all as specified and directed. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 45 | Taking down Shutters of any description n exc 1 sq.m each complete all as specified and directed. |
| 46 | Taking down Shutters of any description exc 2 sq.m each complete all as specified and directed. |
| 47 | Taking down shutters and refixing in same opening of any description n.exc 1 Sqm each complete all as specified and directed. |
| 48 | Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 49 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 50 | M&L formild steel TMT steel barsin reinforcement5mm dia and over up to 10mm dia in stirupscut to length bent to shape required including crankingbindingspirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia complete all as specified and directed. |
| 51 | M&L for TMT bars, 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns,hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 52 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed. |
| 53 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 54 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqmn.exe 4 sqm each complete all as specified and directed. |
| 55 | S&F for second class hardwood plain,solid,straight,chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed . |
| 56 | S&F 2nd class softwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed. |
| 57 | S&F 2nd class softwood 30 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); to chowkats complete all as specified and directed. |
| 58 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 59 | S&F factory made steel windows with side hung shutter incl projecting type hinges with steel handles, and steel complete with glazing bars, dovetailed or welded complete all as directed. |
| 60 | ditto as item no 34 above but without glazing bars all as directed. |
| 61 | S&F Steel ventilators with side hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed. |
| 62 | S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed. |
| 63 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.. |
| 64 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 65 | S&F Butt hinges 75mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 66 | S&F125 mm size aluminium anodised handles, cast type complete all as specified and directed. |
| 67 | S&F150mm size aluminium anodised handles, cast type complete all as specified and directed. |
| 68 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 69 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 70 | S&F aluminium alloy sliding door bolt 300mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.. |
| 71 | S&F Sheet glass 4.0 mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 72 | S&F in repair Aluminium anodised Brackets complete all as specified and directed. |
| 73 | S&F Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed. |
| 74 | S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring.complete all as specified and directed. |
| 75 | Taking up or down steel tubing and connections, 15/20 mm bore and removal of unserviceable pipe from site of work complete all directed. |
| 76 | M&L coloured glazedceramic tiles200x 300x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 77 | S&F Fe 410-W(Gde-E250)joist , angle or tee section, fixed independlty, without connecting plates etc as in purlins and tank staging complete all as specified and directed. |
| 78 | S&F 20mm outer diameter of3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 79 | S&F 20mm outer diameter of pipes PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 80 | S&F 25mm outer diameter of PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 81 | S&F 25mm outer diameter ofPP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 82 | S&F Stop valve 20mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 20mm-112gms) complete all as specified and directed. |
| 83 | S&F 25mm outer diameter of 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 84 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and as directed. |
| 85 | S&F 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 86 | S&F 20mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 87 | S&F 15mm borebib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwedfor iron pipe or for brass ferrule complete all as specified and directed. |
| 88 | S&F 15mm borestop valves/angle cock, cast copper alloy, with crutch or butterfly handle, screwed down, screwedfor iron pipe or for brass ferrule complete all as specified and directed. |
| 89 | S&F Chromium plated shower roses 125mm size of Std quality and approved make with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.. |
| 90 | S&F in repair CP tubular towel rail 600 mm long complete all as specified and directed. |
| 91 | S&F in repairs Soap dish complete all as specified and directed. |
| 92 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 93 | S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 94 | S&F Vitreous China wash basin, white, flat back, size 630x450mm (flat back or angle back type) including brackets, cutting for and pinning \"in brackets waste coupling, waste pipe, grating complete all as specified and directed. |
| 95 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 96 | S&F Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms)complete all as specified and directed. |
| 97 | S&F wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes anti-syphonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed |
| 98 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 99 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete as as specified and directed. |
| 100 | S&F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe and brackets complete all as specified and directed. |
| 101 | S&F PVC connections 15mm size with PTMT nuts of length 300/450mm complete all as specified and directed.. |
| 102 | S&F 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.. |
| 103 | S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 104 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 105 | M&L for PCC 1:3:6 type C1 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 150mm dia pipe complete all as specified and as directed. |
| 106 | S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 107 | S&F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 108 | S&F 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 109 | S&F in repairsPVC (SWR) , 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc,complete all as specified and directed. |
| 110 | S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 111 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 112 | S&F PVC (SWR) bends of radius 110mm bore complete all as specified and directed. |
| 113 | S&F PVC (SWR) bends of radius 75mm bore complete all as specified and directed. |
| 114 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 115 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 116 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and directed. |
| 117 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and directed. |
| 118 | S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed. |
| 119 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement as in repaircomplete all as specified and as directed. |
| 120 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 121 | M&L for PCC 1:3:6 type C2 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipecomplete all as specified and as directed. |
| 122 | S&F for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 123 | M&L for applying two coat of cement based paint painton new surface including preparation of surface incl Priming plastered and other surfaces with alkali resistant priming paint complete all as directed. |
| 124 | M&L for applying one coat of cement based paint painton old surface including preparation of surface complete all as specified incl Priming plastered and other surfaces with alkali resistant priming paint complete all as directed. |
| 125 | M&L for preparation of new plaster surface of walls etc and applying two coats of acrylic washable distemper over 1 mm thick wall care putty in two coats over a coat of primer (smooth bodied opaque finish surface) complete all as specified and directed. |
| 126 | M&L for Preparation of new plastered surfaces and applying two coats of OBD over a layer of 1 mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed. |
| 127 | M&L for preparing of surfaces of walls by complete removal of existing treatment and applying two coats of acrylic washable distemper over 1mm thick wall care putty in two coats over a coat of primer (smooth bodied opaque finish surface) complete all as specified and directed. |
| 128 | M&L preparation of new surface & applying two coat of synthetic enamel paint to wooden surfaces exc 10 cm girth complete all as specified and directed. |
| 129 | M&L preparation of old surface & applying one coat of synthetic enamel paint to wooden surfaces exc 10 cm girth complete all as specified and directed. |
| 130 | S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipecomplete all as specified and as directed. |
| 131 | S&F for 500 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position including taking down existing tank complete all as specified and directed. |
| 132 | S&F for 1000 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position including taking down existing tank complete all as specified and directed. |
| 133 | S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 134 | M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through PVC casing & capingminimum size 20 mmincluding accessories,fixed on surfaces of wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes 1.6 mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium screws for housing the switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cablefor earth continuity and connecting to common earth dolly including taking down existing point wiring complete all as specified and directed. |
| 135 | (a) One light point controlled by one switch |
| 136 | (b) One fan point controlled by one switch |
| 137 | (c) One light point controlled by one switch |
| 138 | (d) One 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 139 | (e) One fan point controlled by one switch |
| 140 | (f) One 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 141 | (g) One 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 142 | (h)One socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size (two run) & 1.5sqmm (one run) . |
| 143 | S&F switch piano flush type 15 amps single pole one waycomplete all as specified and directed by Engr-in Charge |
| 144 | S&F socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed by Engr-in Charge |
| 145 | S&F switch piano flush type 5 amps single pole one way complete all as specified and directed by Engr-in Charge |
| 146 | S&F socket outlet 2 in 1,3pin5 amps 230 voltscomplete all as specified and directed by Engr-in Charge |
| 147 | S&F ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminalscomplete all as specified and directed by Engr-in Charge |
| 148 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame andlouvers complete and old fan deposit to E/M yard complete all as specified and directed. |
| 149 | S&F lamp holder insulated body with back plate for batten fittings/angle holder as required and including taking down old damaged holder complete all as specified and directed. |
| 150 | S&F ofLED bulb 9 w highsutable for lamp holder complete completeall as specified and as directed by the Engineer-in-Charge. |
| 151 | S&F Electronic fan regulator dimmertype,450w , 250 voltcomplete all as specified and directed by Engr-in Charge |
| 152 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Five star rated with brushless direct current motor complete and old fan deposit to E/M yardcomplete all as specified and directed. |
| 153 | Supply and fix 20Watts LED light fitting, basic all purpose surface and wall mounted LED batten 20Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No. all as per Cat No.LTTB4F20WLED/W of C&Sor equivalent of other specified makes fixed on surfaces of wall or ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. |
| 154 | Supply and fix 10 Watts environmental friendly, ultra moders, energy saving, surface mounted , decorative oval bulk headedge-lit LED luminaire comprising of high brighthess LEDsall as per Cat No SIRIUS/10Wof C&Sor equivalent of other specified makes all as specified and as directed by the Engineer-in-Charge. |
| 155 | S&F sub main wiringcomplete with two runs of 4 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable of 1100 volts grade drawnthrough new non metalic rigid PVC casing capping onwall alongwith accessories fixed on wallS&Floors/ceilingwith one run of 4 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor including taking down existing sub main wiring complete all as specified and directed..Note:- Two runs of PVCinsulatedcable 4 sqmm+ one run 4 sqmmof earth wire and one run of conduit including accessories shall be measured as one length complete all as specified and directed. |
| 156 | Supply and fix electric water heater, storage type steel body with copperinner tank and heating element upto2 KW capacity 25 litre,5 Starratedwith all accessories such as safety valve, thermostate,NRV, PVC connection pipeccomplete and old geyserdeposit to E/M yardcomplete all as specified and directed. |
| 157 | S&F sub main wiringcomplete with two runs of 4 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable of 1100 volts grade drawnthrough new non metalic rigid PVC casing capping onwall alongwith accessories fixed on wallS&Floors/ceilingwith one run of 4 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor all as specified and directed by Engr-in-Charge.Note:- Two runs of PVCinsulatedcable 4 sqmm+ one run 4 sqmmof earth wire and one run of conduit including accessories shall be measured as one length complete all as specified and directed. |
| 158 | S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as specified and directed. |
| 159 | S&F Sheet metal enclosure of single pole and neutral enclosurewith a Two pin and earth plug and socket complete with one MCB of 20Amps complete all as specified and directed. |
| 160 | S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt4 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one complete all as specified and directed. |
| 161 | S&F MCB of rating 240 Volts,SPN 40 Amps complete all as specified and directed. |
| 162 | S&F MCB of Single pole of rating 6 to 32 Amps complete all as specified and directed. |
| 163 | Earthing complete with galvanisedsteel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion complete all as specified and directed. |
| 164 | Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning ofof size16sqmm 2 corecomplete all as specified and directed by Engr-in Charge .Note :- Including nacessary excavation and clamp on wall with proper screw complete |
