Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in any description and in anypositionnot otherwise specifically provided for complete all as specified and directed. |
| 3 | Demolition of cement concrete (reinforced) in roofs,floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 4 | Dismantling brick tiles in roof top laid bedded & pointed in any mortar and removing from site all as specified and directed. |
| 5 | Demolition of mudany thickness, including plastering and leaping and tiling of whether part removal or full or as specified and directed. |
| 6 | Disposal of removed/demolished soil/materials exc 1.50 km but n. exc 5 km and depositing where directed complete all as specified and directed |
| 7 | M&Lcement concretetype B-0, 1:2:4 mix ( 12.5 mm graded agg) in, roof kerbs or mud stops, rounded or chamfered on edgesand similar workall as specified and directed. |
| 8 | M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in roof padding etc and similar work all as specified and directed. |
| 9 | M&L RCC Type B0 1:2:4 Type using (12.5mm gradedaggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and complete all as specified and directed. |
| 10 | PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement plinth protection shall be laidto alternate bay system each bay shall exceed 3m in lentgth12mm wide and 75mm deep joint sall be filed with hot blownbitumen 85/25and sandcomplete all as specified and directed. |
| 11 | Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) M & L three coat of waterproofing solutions smartcare damp proof ultra an innovative fiber reinforced elastomeric liquid which provide the ultimate waterproofingcover of 2.32sqm/Liter with 10 years of waterproofing warranty complete all as specified and directed by Engr-In-Charge. (ii) 40mm bore GI pipe for Spout pipe length 0.75m. |
| 12 | M&L forPCC type D2 (1:4:8) as in foundation, filling and mass concrete |
| 13 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 14 | M & L preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush/ pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5kg/Sqm/2coats spray/brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM C2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardnessof not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer\"s instructions complete all as specified and directed. |
| 15 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 16 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 17 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. |
| 18 | Brickwork with sub-class `B\" brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed |
| 19 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applyingement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 21 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 22 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall complete all as specified and directed. |
| 23 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall complete all as specified and directed. |
| 24 | Supply only liquid water proofing compound completeall as specified and directed. |
| 25 | M & L for rendering 5mm thick in CM 1:3 on ceiling surface finishedeven and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed. |
| 27 | M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty over one coat of primer including complete removalof existing treatment with mechanical complete all as specified and directed. |
| 28 | M & L for applying 1mm thick water proofing putty andtwo coats of Acrylic weather proof Exterior painton new plastered or unplastered surface of walls or concrete including preparation of surfaces at any height (not exc11 Mtr) including necessary scaffolding/centering etc complete all as specified and directed. |
| 29 | M&L for applying three coats of white wash on ceiling new plaster surface with mechanical, complete all as specified and directed. |
| 30 | M&L for applying two coats of white wash on ceiling includingcomplete removalof existing treatment with mechanical complete, complete all as specified and directed. |
| 31 | M&L Preparing newplastered or unplastered surfaces and applying three coat of white washon wall surfaces complete all as specified and as directed |
| 32 | Providing Acrylic plastic number plate of size 300mmX 300mm X 3mm and writing building No. of height 10 to 15 cm in any style (bold/italic) and fixed to wall with screws complete all as specified & directed. |
| 33 | Providing Acrylic plastic number plate of size 200mmX 200mm X 3mm and writing Qtr No. of height 10 to 15 cm in any style (bold/italic) and fixed to wall with screws complete all as specified & directed. |
| 34 | Cutting the roots of trees from the brick walls/stone wall made in cm exc half and not exc one brick thick and making good the disturbed surfaces including coating of paving hot bitumen to arrest further growth to the roots including repair existing surfaces with cm 1:3 or PCC 1:2:4 complete all as specified and directed. |
| 35 | S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed.. |
| 36 | S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed. |
| 37 | M&L One coat of epoxy resin (FAIR BOND EP) on old concrete surface @ 0.30 kg/Sqm including preparation of surface as per as per manufacturer\"s instruction and applying 25 mm thick on ceiling, beams, chajjas & facia surface etc (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free sprey concrete plasticiser (spray crete) as per manufacturer\"s instruction with guniting machine of pressure capacity not less than 5kg per Sqm and finished the surface even & smooth in CM 1:4 plaster min. 10 mm thick complete all as specified &as directed. Make :- Fairmate/Pedilite/Forsroc or equivalent |
| 38 | S&F galvanised welded steel wire fabric as extra reionforcement to RCCmembers likeceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste complete all as specified and directed. |
| 39 | M&L for treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors |
| 40 | M & L (Brushbond RFX) Elastomeric polymer modiffied cemtentitious waterproofing coating used for waterproofing of extg and new naked bricks surface complete all as spd and dir. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 42 | M&L for coloured glazed ceramic tilesin vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 43 | M&L non skid joint free coloured tiles(1st quality/premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.18Sqm but not exc. 0.36 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6)complete all as specified and directed. (bed room and other room floor) |
| 44 | All as per Item No 43but in skirting over 7 to 8mm thick rendering in CM 1:4, 10mm thick all as directed by Engr - In -Charge. |
| 45 | M&L non skidjoint free coloured tiles (1st quality/ premium quality) 7 to 8 mmthick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6)complete all as specified and directed.(toilet,bath,kitchen, passage floor) |
| 46 | M&L Machine cutkota stone slab flooring 18-20mm thick over cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including20mm thickscreed bed CM (1:6) complete all as specified and directed. |
| 47 | M&L Machine cut kota stone 18-20 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding andpolishing laid over and including15mm thick rendering CM (1:4) complete all as specified and directed. |
| 48 | M&L 18/20mm thick black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match the shade of stonecomplete all as specified and as directed. |
| 49 | M&L providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc.complete all as spd and dir by Engr-in-charge. |
| 50 | Boring holes through cooking platform lining for pipes ,etc n\"exc 50mm dia and making goodcomplete all as spd and dir by Engr-in-charge. |
| 51 | M&L 25 mm thickPCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooringfinished even and fair without using extra cement complete all as specified & directed. |
| 52 | S & F in repairs 15 mm bore chromium plated fancy bib taps long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 53 | S&Fin repair 15 mm bore fency CP Stop valve / angle valve screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 54 | S&Fin repair 15 mm bore CP concealed Stop valves, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 55 | S&F in repair 15 mm bore CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified & directed. |
| 56 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S&F in repair Cabinate Mirror PTMT of size 450 mm x 600 mm complete all as specified and directed.Make : Prayag or equivalent as approved by GE |
| 58 | S & Fin repair three size Corner glass shelf with frame chromium plated complete all as specified and directed. |
| 59 | S & F in repair CP Soap dish size 120mm x 80mm chromium plated complete all as directed |
| 60 | S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specifiedand directed |
| 61 | S & Fin repair tubular towel rail 60 cm length of stainless steel20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 62 | S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed. |
| 63 | S&F in repairs Vitreous china wash basin white with pedestal flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed.. |
| 64 | S&Fin repair 100 mm square Stainless steel grating with openable flap complete all as specified and directed. |
| 65 | S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed |
| 66 | S&Fin repair Waste coupling of CP (half or full threaded)of 32mm bore suitable for wash hand basin/Sinkcomplete all as specified and directed. |
| 67 | S&F 32 mm dia PVC waste pipe for wash basin/Sinkcomplete all as specified and directed. |
| 68 | S & F in repairs CP shower rose 125mm dia alongwith shower arm complete all as spd and dir. |
| 69 | S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washersincl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etccomplete all as specified and directed. |
| 70 | S&Fin repair plate rack of 1mm thick stainless steel of size 900x750mm with three shelves complete all as specified and directed. |
| 71 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with \"P\" or \"S\" trap front or back inlet including footrest (excluding fluxing cistern and flush pipe)complete all as specified and directed. |
| 72 | S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank tripal layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. |
| 73 | S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight- 210 gm) complete all as specified and directed. |
| 74 | Dismantling steel work including doors, gates and hand rails but excluding framed truss etc. |
| 75 | M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,alusters, nosing to steps ncluding embeding in concrete and screwing etc. wind ties for roof including securingoltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 76 | Dismantling framed work timber scantling, hand rail 40 sq.cm and over in section, in any positioncomplete all as specified and directed. |
| 77 | M&L 1st class hardwood of size 100x75mm Handrails rounded or shaped with splayed faces in straight lengths complete all as specified and directed. |
| 78 | Taking up or down 15mm bore steel tubing and connection complete all as specified and directed. |
| 79 | All as per item Noabove but 20mm bore |
| 80 | S & F 15 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 including complete fittings on walls/ceiling or laying in floors complete all as specified. |
| 81 | S&F 20mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors completeall as specified and directed. |
| 82 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 83 | S & F in repair 20mm dia Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 84 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and suitable clamp fixed to wall complete all as specified and directed. |
| 85 | S & F 75 mm bore PVC (SWR) bends sith complete fittings of any radius complete all as specified & directed. |
| 86 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 87 | S & F 110 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified & directed. |
| 88 | S&F110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed. |
| 89 | S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed. |
| 90 | S & F in repairs 100mm dia of cast iron floor trap, plain with grating incl jointing with solvent cement concrete type B-1 (1:2:4complete all as specified and directed complete all as specified and directed. |
| 91 | S & F in repair stainless steel curtain rods or 25mm dia as in doors/windows SS brackets fancy type including screws and other necessary fitting (Knob) for fixing brackets SS funnels for 25mm dia dropry rod fixed at each end of rods compete all as specified and directed. |
| 92 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 93 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 94 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for Factory made WPC (Wood Polymer Composite)Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F for factory made 35mm thick 100% solid WPC (Wood polymer composite) solid plain wire mess door shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade, Calcium carbonate and natural fibers wood powders/rice husk/wheat husk) and nontoxic additives, made from extrusion proces WPC foam sheet single extruded inner with density not less than 650kg/cum as per ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawlnstrength of 2000N (face) & 1100N (Edge) minimum compressive strength of 50 N/sqmm, modulus of elasticity 850N/Sqmm and resistance of spread of frame of class A category with properity of being termite/borer free water /moisture proof, fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including aluminium jail and stainless wire cloth material test certificate and authentication should be compulsory provided by the manufacturing company all as per specified and directed. Note: Stainless steel wire cloth will be paid in the respective items. |
| 97 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge |
| 98 | S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples completeall as specified and directed. |
| 99 | M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed. |
| 100 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 101 | M & L in repair 18mm thick coloured MDF board with hardwood fibres prelaminated both sides including cutting, screwing as in kitchen cabinet, almirah shutter including teakwood liping 6mm thick complete all as specified and directed. |
| 102 | S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 103 | S & F 40mm width Countinious (Piano) type hinges, mild steel bright finish or electrogalvanised all as specified and directed. |
| 104 | S & F 100mmStainless steel handle for kitchen cabinet compete all as specified and dir |
| 105 | S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as spd and dir. |
| 106 | S&F factory made solid moulded PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement complete all as specified and directed. |
| 107 | S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed. |
| 108 | S & F PVC door( back side) stopper 75mm long complete all as spd and dir. |
| 109 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 110 | S&F 300 mm long Mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 111 | S&F 150 mm long aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 112 | S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 113 | S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 114 | Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513\"D\" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 115 | Eco-4000 Series Ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513\"D\" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm frosted glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 100mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 116 | M&L for 75mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed. |
| 117 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigmentsneat cementto match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. |
| 118 | M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels, bed of drains including forms/moulds etc. complete all as specified and directed. |
| 119 | Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mi-tred/stopped ends (inner girth will be measured). |
| 120 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, manholes, etc n.exc 10 Sqm plan and getting out in soft/loose soil complete all as specified and directed. |
| 121 | Removing of surplus soil excavated materials to a distance exceeding 50 M but not exc 100M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 122 | Returning filling including spreading,levelling,watering and well ramming in layers n. exc 25 cm thick complete all as specified & directed. |
| 123 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore of pipe |
| 124 | M&L for 150 mm dia SGSW drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed. |
| 125 | M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed. |
| 126 | M&L for providing pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed.(Note :- Reinforcement shall be measured and paid separately) |
| 127 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with cli complete all as specified and directed. |
| 128 | M & L mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required, including cranking, bending, spirally for hoopinghooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips |
| 129 | M&L for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping. |
| 130 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge. |
| 131 | Material and labour for point wiring with 1.5Sqmmcopper conductor (Multi-standard) PVC insulated andunsheathed electric cable 1100 voltsin and includingPVC Conduitof suitable size with all fittings/ accessories in concealed and including PVCinsulated and unsheathed electric cable1100 volts1.5 Sqmm ( multi-stranded)copperconductor single core( Green co lour) cable as continuous earth wire connected to common earth dollyincluding50 mm deep box made of 2nd class hard board of requiredsizeand shape etc covered with 3 mmthick plastic laminated sheet ( Make Hylum) forone lightpoint independent controlled by one, one way switchcomplete all as specified and as directed by the Engineer-in-Charge. |
| 132 | All as per item No-131 here in before but for one light point controlled by two nos 2 wayswitchescomplete all as specified & directed. |
| 133 | All as per item No 131 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 134 | All as per item No 131 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 135 | All as per item No-131 here in before but using2.5 sqmm PVC FRLS insulated stranded copper conductor cable andfor one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed.NOTE-For item no 131 to 135 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelite laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light fittings shall be measured and paid for separately under appropriate item of schedule A.(iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 25 mm dia (medium grade) |
| 136 | Supply and fixing switch piano flush button single pole one way5 Amps complete all as specified and as directed by the Engineer-in-Charge. |
| 137 | S & Fswitch piano, flush type single pole, two way5 Amp 230 volts complete all as specified and directed |
| 138 | S&F switch, bell push button, single pole,5/6 Amps, one way, 230 Volts complete all as specified and directed. |
| 139 | Supply and fixing socket outlet multipurpose 2 pin and 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge. |
| 140 | Supply and fixsocket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. |
| 141 | Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed. |
| 142 | Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed. |
| 143 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 144 | Supply & fix commissioning and testing of AC Box compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate with suitable size copper conductor cable with overload protective device (MCB) suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed. |
| 145 | Taking down care fullysub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor . |
| 146 | M&L forsub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:-Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 147 | M&L forsub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:-Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 148 | Supply and fixing LED lights fitting 1x 20W, 220V, inverter batten AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 149 | Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed. |
| 150 | Supply and fixing LED Bulb 12 watt, colour temp-6500K, lum output-945lm, Base cap- B22 single phase, 230 Volts AC supply suitable for lamp holdercomplete all as specified and directed. |
| 151 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 152 | Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including fixing arrangment at wall/pole all as directed. |
| 153 | Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces. |
| 154 | Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable tiesfor cable management suitable for housing MCCB TPN 415 Volts as incomer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mounting type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate complete all as specified and directed . |
| 155 | S&F MCCB of rating 100 Amp, 4 pole, 415 V, AC fixed type with breaking capacity 16 KA DPX³ 160 type, as per ICE- 60947-1 Ics 100% of Icu, Adjustable tripping: 0 - 0.3 - 1 - 3s with adjustable 70% to 100% and thermal magnetic release to be fixed in existing LT panel for taking In coming electric connection for VTPN DB complete all as specified and directed at site. |
| 156 | Supply & fix in replacement MCB SP, 40 Amps, \"C\" Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. |
| 157 | Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed. |
| 158 | Supply and fixing in replacement MCB SPN240V,50 Hz, 10KA \"C\" curve miniature circuit breaker (MCB) and current carrying capacity 40-63 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed. |
| 159 | Supply & fixMCB SP, 6 to 32 Amps, \"C\" curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI markedcomplete all as specified & directed. |
| 160 | Supply & fixrotary stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed. |
| 161 | Taking down old Fan any type and deposite to E/M Store yard and Supply and fix ceiling fan, 1200mm sweep, minimum 210 CFM, 230 V, BEE 5 star rated, BLDC(brushless direct current motor ) type complete with standard accessories i.e (three blade, 02 Nos canopy, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts,bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm stranded copper conductor 3 core flexible cable cord complete all as specified and directed. |
| 162 | Taking down exhaust fan and deposit it to E/M yard of any size existing at site. Complete all as specified and directed by Engr-in- Chrage. |
| 163 | S&F iniron metal body heavy duty exhaust fan 300 mm sweep, double ball bearing, copper wound, with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm stranded copper conductor 3 core flexible cable cord complete all as specified and directed. |
| 164 | Supply and fix PVC body fresh air circulator of size 250 mm sweep, with PVC louvers, operated at 230 Volts 50 Hz, 1350 to 1400 RPM with 3 core flexible copper conductor cable cord of size 0.75 Sqmm from fan to ceiling rose complete all as specified and directed. |
| 165 | Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to the4 mm GI wire by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plate No 5 of SSR 2010 Part-I and connecting toCBDB’s as specified or indicated including testing on completion . |
| 166 | Supply and fix electric water heater, of capacity 25 Ltrs vertical storage type, outer body of the heater is made with tough ABS material with special inner tank coating that prevents corrosion and rusting and results in a long tank life energy-efficient and HeatingElement upto 2 KW (copper tube)-Spiral Type Multiple safety systems for protection against dry heating, overheating and overpressure, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece (hot & cold of length uoto 450 mm long withto be fixed on wall withfastener mild steel 100 mm long x 10 mm dia with expansion type split pin and bolts complete for hanging of geyser all as specified and directed. (New Geysers are considered against BER). |
| 167 | Disconnecting& taking up or down existing unserviceable UG cable/service wire aluminium conductor including GI wire any size and type, complete all as specified and directed. |
| 168 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core. |
| 169 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soilcomplete all as specified and as directed by Engineer-in-Charge. |
| 170 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge. |
| 171 | Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge. |
| 172 | Supplying and laying un-reinforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable. |
| 173 | M&L for sand cushioning dry fine for cable cushioningbelow and abovethe cable complete all as directed at site by Engr- in-Charge. |
| 174 | Supply and fixing GI Pipe 40mmLight grade , for cable protection laid in trench under road or pathor fixed on pole or wall with clamps with all fittings complete all as specified and as directed at site. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
