|
| 1 | Earth work in excavation in trench for foundation in ordinary soil i/c lift upto 1.50 mtr. & lead upto 50.00 mtr and dressing of sides and ramming of botton and disposal of surplus excavated eath as directed bu the E/I within a distance of 50 m. (as per Sl No. 251) |
| 2 | Sand filling in plinth excluding supply of necesary quantity of sand from a distance not exceeding 8 k. From the site of work and including watering ramming, dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work. |
| 3 | Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints, surroundings of pipes and conduit etc. complete (Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follow :- |
| 4 | Earth work filling with 5km cartage including ramming & dressing of as per direction of e/i |
| 5 | Providing and laying in cement concrete 1:4:8 of not less than strength of M-150 stone ballas (20 mm nominal size 2 approved coarse and : 1 cement and curing complete, including cost of formwork in foundation and floors. |
| 6 | R.C.C. work with cement approved course sand and 2 cm {3/4\"} guage approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all meterials, labours and T & P etc. required for proper completion of the work. Binding wire cost being included in the item. As per SOR Sl No. 284b |
| 7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of he work and including supply of all steel and wastages and over lapping and hookes. As per SOR Sl. No. 504 |
| 8 | First class brick work in 1:6 cement and fine sand of 1.25 FM mortar in foundation and plinth including supply of all materials labour T&P etc. required for proper completion of the work. |
| 9 | First class bricks work in 1.4 in cement and coarse sand mortar in foundation and plinth and wall including supply of all materials, labour and T&P etc. required for proper completion of the work. As per SOR Sl. No. 305b |
| 10 | First class bricks work in 1.4 in cement coarse sand mortar in foundation and plinth and wall including supply of all materials, labour and T&P etc. required for proper completion of the work. As per Ch 6 PWD 305(b)+310+310a |
| 11 | 12 mm thick plaster with cement mortar in proportion of 1:3 cement and approved coarse sand. As per SOR CH. 13 Sl No. 5 PWD Specification No. 583 |
| 12 | Providing and applying white cement based putty of average thickness 1 mm or approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per SOR CH. 15 Sl No. 30 |
| 13 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm)(apex Ultima. Weather coat All quard) asian, berger. As per SOR CH. 15 Sl. No. 23 |
| 14 | Providing and laying verifed floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colour and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including gouting the joints with white cement and matching pigments etc. complete size of tile 600x600 m 11.41.2 |
| 15 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colour and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477 in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) 11.47.2 |
| 16 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking fixing necessary 27.5 cm long wire springs manufactured from hight tensiled steel wire of adequate strength conforming to IS : 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 |
| 17 | Painting or vansishing on iron worksin small areas or new wood work with one cost of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T&P etc. required for proper completion of work paint to be used should confirm to the I.S.I No. 103 1950 (641+642) |
| 18 | Contruction of RCC Stair cases of labour rate material T&P etc all complete I.S |
| 19 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe. with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. WHite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per DSR-2023 Chp-17 iterm No. 17.1.1 |
| 20 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing costern, with fittings standard size C.P. brass flush pipe, preaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required 17.51. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern As per DSR-2023 Chp-17 Iterm No. 17.5.1 |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer A per DSR-2023 Chp-17 Item No. 17.7A(a) |
| 22 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of SIze 510x1040 mm bowl depht 225 mm as per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen sink with drain board As per DSR-2023 Chp-17 Item No. 17.10.1.2 |
| 23 | Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) piped, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making the walls etc. As per DSR-2023 Chp-18 Item No. 18.8.1 |
| 24 | Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. As per DSR-2023 Chp-18 Iterm No. 18.8.2 |
| 25 | Providing PVC pipe 110 mm dia 6 g pressure as per IS : 12818 |
| 26 | Providing 110 mm dia PVC Elbow / Bend as per IS : 12818 |
| 27 | Providing 110 mm dia PVC Tee dia as per IS : 12818 |
| 28 | Providing 110 mm dia PVC Y dia as per IS : 12818 |
| 29 | Providing 100 mm dia PVC Nahani Trapp dia as per IS : 12818 |
| 30 | Providing and fixing gun metal gate valve with wheel of approved quality. 25 mm dia |
| 31 | Providing of PVC water storage tank IS : 12701 marked, with cover Syntex of Equivalent triple layer but without fittings and the base support for tank. |
| 32 | Providing and fixing unlasticised 110 mm - PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement 4 coarse sand) and making good the wall etc. complelet |
| 33 | Labour Charges of Plumbing work for Toilet Kitchen and Rain Water Line & instlation of PVC water storage tank. Syntex of Equivalent triple layer but with fittings and the case support for tank. |
| 34 | Providing & fixing C.P. towl rail 820x20 mm complete with brackets to fit the towel rail. |
| 35 | Providing and fixing Liquid soap container of standard shape with bracket of the same material |
| 36 | Providing and fixing looking mirror with police of size 600x450 mm with bevelles edge |
| 37 | Providing of Exaust Fan |
| 38 | Providing of Tube Light |
| 39 | Providing of Modular Switch Box 4 Module |
| 40 | Providing of Modular Plate 4 Module |
| 41 | Providing of Modular Switch Box 6 Module |
| 42 | Providing of Modular Plate 6 Module |
| 43 | Providing of Modular Switch Box 12 Module |
| 44 | Providing of Modular Plate 12 Module |
| 45 | Providing of Modular Electrical Switche 6/16 Amp |
| 46 | Providing of Modular Electrical Socket 6 Amp |
| 47 | Providing of Modular Electrical Socket 16 Amp |
| 48 | Providing of Copper Wire 1.5 mm |
| 49 | Providing of PVC Condute Pipe |
| 50 | Labour Charges for Electrical Work |
| 51 | Supply of Celling Fan |
| 52 | Providing of 10/16/32 Amp MCB |
| 53 | Providing of 15 Ltr Electrical Gluser |
| 54 | Providing & Fixing of Aluminium Curtain Rod 20 mm Dia & Bracket & Latio with all Material & Labour |
| 55 | Providing & Fixing 15 mm CP Brass Long Body Bib Cock of approved quality confirming to IS Standard weight not less than 690 gm. As per DSR 2023 Chp-18 Item No. 18.51.1 |
| 56 | Providig & Fixing 15 mm CP Brass Angle Valve for basin mixure & giesure points of approved quality confirming to IS Standard 8931 weight not less than 690 gm. As per DSR 2023 Chp-18 Item No. 18.53.1 |
| 57 | Providing of CP Wash Basin Mixure |
| 58 | Providing CP Kitchen Sink Mixure |
| 59 | Providing of CP Waist Coupling |
| 60 | Providing of CP Waist Pipe 32 mm dia |
| 61 | Providing of CP PVC Connector 600 mm long |
| 62 | Providing of CP Round Jali 5 inch |
| 63 | SS Tower Boult 10 mm DIa 8 inch long |
| 64 | SS Tower Boult 10 mm DIa 6 inch long |
| 65 | SS Tower Boult 10 mm DIa 4 inch long |
| 66 | SS Sliding Boult 16 mm DIa 12 Inch long |
| 67 | SS Door J Hook |
| 68 | SS Door Handle 6 inch |
| 69 | SS Door Handle 4 inch |
| 70 | SS Door Hinges 5 inch |
| 71 | SS Window Hinges 4 inch |
| 72 | Supply & Instalation of computer set |
| 73 | Supply & Instalation of Laser Printer |
| 74 | Deduct scrap value old building Please Enable Macros to View BoQ information |
