|
| 1 | Demolishing stone rubble masonry manually/ by mechanicalmeans including stacking of serviceable material and disposalof unserviceable material within 50 metres lead as perdirection of Engineer-in-charge: |
| 2 | In cement mortar. |
| 3 | Extra for cutting reinforcement bars manually/ by mechanicalmeans in R.C.C. or R.B. work (Payment shall be made on thecross sectional area of R.C.C. or R.B. work) as per direction ofEngineer-in-charge |
| 4 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as perdirection of Engineer-in-charge. |
| 5 | 1: 3: 6 or richer mix. |
| 6 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : |
| 7 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 8 | Half brick masonry in Superstructure , above plinth level uptofloor V level using bricks of designation 75 |
| 9 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 10 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish : |
| 11 | 25 mm thick. |
| 12 | Providing and fixing 12 mm thick prelaminated three layermedium density (exterior grade ) particle board Grade I, TypeII conforming to IS : 12823 bonded formaldehyde syntheticresin ,of approved brand and manufacture in paneling fixed inaluminium doors ,windows shutters and partition frames withC.P. brass / stainless steel screws etc. complete as perarchitectural drawings and direction of engineer-in-charge. |
| 13 | Prelaminated particle board with decorative lamination onboth sides. |
| 14 | Filling the gap upto 5 mm depth and 5 mm width in betweenaluminium frame & adjacent RCC/ Brick/ Stone work byproviding weather silicon sealant over backer rod of approvedquality as per architectural drawings and direction of Engineerin-charge complete. |
| 15 | Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-charge |
| 16 | Polyester powder coated minimumthickness50microaluminium |
| 17 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, boltsand nuts 8 mm diameter with bitumen and G.I. limpetwashers or with G.I. limpet washers filled with white leadand including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (uptoany pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape whenever required. |
| 18 | 1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 19 | Steel work in built up tubular trusses including cutting,hoisting ( height upto 10 m)fixing in position and applying apriming coat of approved steel primer, welded and boltedincluding special shaped washers etc. complete. |
| 20 | Hot finished welded type tubes. |
| 21 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel. |
| 22 | M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 23 | PART(B) KITCHEN |
| 24 | Fine dressed & machine cut edges 30-35 mm thicksand stoneflooring over 20 mm (average) thick base of cement mortar1:4 (1 cement : 4 coarse sand) jointed grey cement slurrymixed with pigment to match the shade of stone complete asper design drawing and instruction of EI. |
| 25 | Red sand stone (Karauli stone) |
| 26 | Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete. |
| 27 | Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) |
| 28 | Above 3601 Cm2 Slabs |
| 29 | P & F 1st quality Heavy Duty Vitrified glazed MAT tiles onfloor, skirting and steps etc.in different sizes (thicknessminimum 10mm) with water absortion less than or equal0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 includinggrounting the joints with white cement and matching pigmentetc complete. |
| 30 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesceramic glazed vitrified tiles with water absortion less than orequal to 0.08% confirming to IS:13753 & IS : 15622 on walls,pillars etc. laid on a bed of neat cement slurry finished withflush pointing in the white cement mixed with pigment tomatch the shade of the tile complete (excluding the cost ofcement plaster on walls and pillar). |
| 31 | Size 600mm x 1200mm |
| 32 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles withcement based high polymer modified quick-set tile adhesive(Water based) conforming to IS: 15477 , using 5kg. adhesiveper sqm of tile area, in average 3mm thickness instead ofcement mortar. |
| 33 | Providing and fixing welded mesh/expanded metal mesh inframe work, flat iron beading 20x3mm including top cross lapsinside and out sides welding, iron bolts, crews, clips etc.complete (excluding frame work) of size.Welded mesh 50 mmx 25 mm x 2.1 mm |
| 34 | Steel work in built up tubular trusses including cutting,hoisting ( height upto 10 m)fixing in position and applying apriming coat of approved steel primer, welded and boltedincluding special shaped washers etc. complete. |
| 35 | Hot finished welded type tubes. |
| 36 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 37 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish :25 mm thick |
| 38 | Finishing walls with textured exterior paint of required shadeas per approved colour complete as per manufacturersspecifications including primer coat and protecting coatincluding scaffolding and safety provisionRoller Finish av. thickness 400 to 500 microns |
| 39 | Providing and applying white cement based putty overplastered surface to prepare the surface even and smoothcompleteNew Plastered Surface (three or more coats) |
| 40 | Finishing walls with Acrylic Smooth exterior paint of requiredshade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including base coat of water proofing cement paint applied@ 2.20 kg/ 10 sqm ). |
| 41 | Providing and fixing 1st quality MAT finished ceremic tilesize 300x300mm confirming to IS : 13755 and IS : 15622colour such as white, grey, ivory, fume red brown, light green,light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointingin the white cement mixed with pigment to match the shade ofthe tile complete (including the cost of cement mortar bed |
| 42 | Ad.For Sainetry and Eletrical work. Please Enable Macros to View BoQ information |
