|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises etc., complete all as specified and directed. |
| 2 | Demolition of stone slabs and tilesof any descriptionor thicknessin floors, aprons, riser of steps, skirting, dado etclaid in any mortar etc., complete all as specified and directed. |
| 3 | Demolition of cement concrete un-reinforced of any description and in any position including removal of exisiting roof treatments if any with its disposal outside the defence landetc., complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete in ground floor and paving not exc 15cm thick above or below ground level etc., complete all as specified and directed. |
| 5 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in cement mortar (1:4) etc., complete all as specified and directed. |
| 6 | Description same all as per item No 05 above, but asin skirting / dado etc. including backing coat 10 mm thick in cement mortar (1:3) etc., complete all as specified and directed. |
| 7 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in levelling course, sub-base/floors and paving etc complete all as specified and directed. |
| 8 | M&L for colored non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed of CM (1:4) bedding etc., complete all as specified and directed. |
| 9 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed with and including 10mm thick backing coat in CM (1:3) etc., complete all as specified and directed. |
| 10 | M&L for 16-18mm thick granite (of any type) work (table rubbed and mirror polished) in steps, jambs, pillars, window-cills, cooking platforms and like with and including 15mm thick screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc., complete all as specified and directed. Note : Colour/shade & size of granite slab shall be as approved by GE. |
| 11 | M&L for rounding (chamfering) to edge of marble/granite slab edge with mirror polishing etc., complete all as specified and directed. |
| 12 | Taking down wooden chowkhats or frames with shutters without taking off shutters from frame area exe 1.5 Sqm and n\"exc 4 Sqm each including fittings etc., complete all as specified and directed. |
| 13 | Taking down aluminium chowkhats or frames with shutters without taking off shutters from frame area n\"exe 1.5 Sqm each incl fittings etc., complete all as specified and directed. |
| 14 | Taking down PVC chowkhats or frames with shutters without taking off shutters from frame n\"exe 1.5 Sqm each incl fittings etc., complete all as specified and directed. |
| 15 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/ stainless steel screws etc., complete all as specified and directed. |
| 16 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc., complete all as specified and directed.Note:-ACP sheet/ glass & wire cloth for doors and windows to be measured and paid separately as supply only and fixing rate of glass/ACP sheet are deemed included in quoted rate under this item. |
| 17 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification etc., complete all as specified and directed. |
| 18 | S&F factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick (style)with 2, 4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing etc., complete all as specified and directed. |
| 19 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in lintel upto 1.5m clear span, steps, bed plates, kerb, coping & kitchen slab etc with and including necessary formwork etc., complete all as specified and directed. |
| 20 | S&F in repair 18-19mm thick decorative choice prelaminated HDF boards (fire & water proof) of as in cup board, cabinet, shelves etc & the like etc., complete all as specified and directed.Note: Colour/ Shade & size of board will be approved by GE. |
| 21 | S&F auto concealed cabinet hinges, full overlay of size 103mm x 64mm etc., complete all as specified and directed. |
| 22 | S&F 100mm fancy \"D\" type drawer/ cabinet handles complete all as specified and directed. |
| 23 | S&F magnetic catcher with plate, glossy finish fordrawer/ cabinet of size not less than 50mm etc., complete all as specified and directed. |
| 24 | S&F 75mm long extruded aluminium alloy handles fabricated types, anodised as in PVC doors etc., complete all as specified and directed. |
| 25 | S&F 100mm long extruded aluminium alloy powder coated handles fabricated types, as in aluminium doors etc., complete all as specified and directed. |
| 26 | S&F 100mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized, type B-21 etc., complete all as specified and directed. |
| 27 | S&F 150mm long aluminum powder coated barrel tower bolt of extruded section as in aluminium doors etc., complete all as specified and directed. |
| 28 | S&F 75mm long aluminium anodised barrel tower bolt all as above but as in PVC doors etc., complete all as specified and directed. |
| 29 | S&F 50mm dia 180 degree magic door eye including fittings to door etc., complete all as specified and directed. |
| 30 | S&F 300mm long aluminum alloy powder coated sliding door bolt with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminumalloy etc., complete all as specified and directed. |
| 31 | Supply only 4mm thick plain sheet glass, ordinary quality,n\"exc 0.5 Sqm in each pane etc., complete all as specified and directed. |
| 32 | Supply only 4mm thick figured glass, pin head type sheet glass ordinary quality n\"exc 0.5 Sqm in each pane etc., complete all as specified and directed. |
| 33 | S&Fdoor stoppers, brass body and tounge with hard drawn steel spring, overall length of cover plate150 mm etc., complete all as specified and directed. |
| 34 | S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80 Kg and fixed etc., complete all as specified and directed. |
| 35 | Supply only aluminium alloy wire cloth 0.45mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples etc., complete all as specified and directed. |
| 36 | S&F in repairs powder coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium windows/ventilators etc., complete all as specified and directed. |
| 37 | Supply only aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed to aluminium doors etc., complete all as specified and directed. |
| 38 | M&L for PCC (1:4:8) type D2, using 40mm graded stone aggregate as in filling in sunken floors etc., complete all as specified and as directed. |
| 39 | M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3%by wt of cement etc., complete all as specified and as directed. (Note : WPC shall be measured and paid separately) |
| 40 | M&L for 10mm thick rendering in CM (1:3) mixed with water proofing compound as per manufacturers instructionson concrete surfaceswhen PCC on roof surfaces is still green including finished even and smooth etc for easy laying of APP membrane on roof etc., complete all as specified and as directed. Note : WPC will be measured & paid separately under relevant Item. |
| 41 | M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying sandwich tack coat of bitumen 85/25 @ 1.2 kg/Sqm with and including laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm and applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and directed. |
| 42 | Supply only water proofing compound (WPC) etc., complete all as specified and directed. |
| 43 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and directed. |
| 44 | M&L for 15mm thick rendering in two layer i.e.5mm thick inCM (1:4) including mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished evenand smooth without using extra cement etc., complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 45 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/ PCC block surfacesof walls finished even and smooth (without using extra cement) etc., complete all as specified anddirected. |
| 46 | M&L for 5mm thick plaster in CM (1:3) on fair faces of concrete surfacesof ceiling finished even and smooth (without using extra cement)etc., complete all as specified and directed. |
| 47 | Taking down damaged, loosened cement concrete/ cement mortar inRCC walls/soffits of slabs, columns, beams etc and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portionwith wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure andapplyingbonding agent on old concrete surfaces all as per manufacturers instruction, over prepared surfaces provide 20mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/sFOSROC chemical ( India ) Pvt Ltd orEquivalent product of manufacturer all as manufacturers instruction includingnecessary scaffolding up to 12 m etc., complete all as specified and directed. |
| 48 | M&L for preparation of newly plastered wall surfaces and apply wall care putty to make the surface smooth and applying two coat of oil emulsion distemper over one coat ofprimer complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered ceiling surfacesand applying three coats of white wash etc., complete all as specified and directed. |
| 50 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint (Ist quality) with anti fungal property over a coat of primer of the same manufacturer as that of paint etc., complete all as specified and directed. Note: Colour/ shade & Pattern as approved by GE.. |
| 51 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etcand apply 1mm (average) thick wall care putty to make smooth and leveling the surface which is undulation found including filling of cracks, holes etc and applying two coats of oil emulsion distemper over one coat primer complete all as specified and directed. |
| 52 | M&L for preparing old plastered surfaces of ceilings and applying one white wash including filling of cracks, holes etc. with cement putty etc., complete all as specified and directed. |
| 53 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces etc., complete all as specified and directed. |
| 54 | Dismantling of cast iron/ PVC pipes including bends/ branch pieces, jointed in cement mortar and taking out etc., of following size complete all as specified and directed :- |
| 55 | 110/ 100mm dia. |
| 56 | 75mm dia |
| 57 | S&F PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solventetc., of following size complete all as specified and directed:- |
| 58 | 110mm dia |
| 59 | 75mm dia |
| 60 | S&F PVC (SWR) bends any radiusetc., of following size complete all as specified and directed :- |
| 61 | 110mm dia |
| 62 | 75mm dia |
| 63 | S&F PVC (SWR) bends with acess door any radiusetc., of following size complete all as specified and directed :- |
| 64 | 110mm dia |
| 65 | 75mm dia |
| 66 | S&F PVC (SWR) branch piece single (Single Y) equal or unequal etc., of following size complete all as specified and as directed :- |
| 67 | 110mm dia |
| 68 | 75mm dia |
| 69 | S&F PVC (SWR) vent cowl completeall as specified and directed :- |
| 70 | 110mm dia |
| 71 | 75mm dia |
| 72 | M&L for75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement etc., complete all as specified and directed. |
| 73 | S&F in repair vitreous china wash hand basin ovel shape of size 550x 400mm with and including fixed on MS brackets, 32mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections except pillar tap etc., complete all as specified and directed. |
| 74 | S&F 15mm bore pillar taps, cast copper alloy, chromium plated fancy type, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts etc., complete all as specified and directed. |
| 75 | S&F in repairs 15mm dia bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc., complete all as specified and directed. |
| 76 | S&F in repairs 15mm dia Swan neck bib taps with flange cast copper alloy chromium plated fancy type suitable for kitchen sink or similar screwed down for Iron pipe or for brass ferrule etc., complete all as specified and directed. |
| 77 | S&F in repairs two way bib cock cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup etc., complete all as specified and directed. |
| 78 | S&F in repairs 15mm dia angle cock with flange chrimium plated fancy type with capstan head handle screwed down for iron pipe or for brass ferrule etc., complete all as specified anddirected. |
| 79 | S&F in repairs 15mm dia stop cock cast copper alloy regular body (male thread) chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup etc., complete all as specified and directed. |
| 80 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with and including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc., complete all as specified and directed. |
| 81 | S&F in repairs brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc., complete all as specified and directed. |
| 82 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc., complete all as specified and directed. |
| 83 | S&F in repair liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden plastic cleats. (Minimum weight 105 gms) etc., complete all as specified anddirected. |
| 84 | S&F in repair hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook etc., complete all as specified and directed. |
| 85 | S&F PVC connection 15mm dia and 600 mm long with both and nuts etc., complete all as specified and directed. |
| 86 | S&F in repairslooking mirror 600 x 450mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board orcommrcial ply wood & fixed to wooden plugs with chromium plated brassscrews and cup washers etc., complete all as specified anddirected. |
| 87 | S&F in repairs 1mm thick stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm etc., complete all as specified anddirected. |
| 88 | S&F in repairs plate rack of stainless steel using 0.65 mm thick sheet of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile etc., complete all as specified anddirected. |
| 89 | M&L for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia upto 10cm depth in marble/ granite stone etc., complete all as specified and directed. |
| 90 | S&F in repairs 20mm dia harrison rails aluminium alloy powder coated with and including fixing curtain brackets, stops, rollers etc., complete all as specified and directed. |
| 91 | S&F chromium plated overhead shower rose & shower arm with or without swivel joints fixed to 15mm bore of pipe etc., complete all as specified and directed. |
| 92 | S&F in repairs wardrobe aluminium hooks set of six, 50mm to 60mm width etc., complete all as specified and directed. |
| 93 | S&F in repair PTMT shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats etc., complete all as specified and directed. |
| 94 | S&F in repair brass chromium plated towel ring with round flange etc., complete all as specified and directed. |
| 95 | S&F corner glass self assembly size 300mm with chromium plated bracket guard and railing etc., complete all as specified and directed. |
| 96 | Taking up or down steel tubing connection, including cleaning for refixing or removal to store etc., of following bore of pipe complete all as specified and directed:- |
| 97 | 15mm bore |
| 98 | 20mm bore |
| 99 | S&F including laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors etc., of following dia of pipe complete all as specified and directed. |
| 100 | 20mm outer dia |
| 101 | 25mm outer dia |
| 102 | S&F in repairs20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes etc., complete all as specified and directed. |
| 103 | M&L for cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth etc., complete all as specified and directed. |
| 104 | M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. |
| 105 | S&F glossy finished heavy duty chequered cement concrete tiles 20cmx20cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry with and including 20mm thick screed bed of CM(1:6) in floors etc., complete all as specified and directed. |
| 106 | Description same all as per item No 89 above but as in skirting/ dado etc. including backing coat 10mm thick in cement mortar (1:4) etc., complete all as specified and directed. |
| 107 | S&F in repair stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings/ grills/ designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location complete all as specified and as directed. |
| 108 | M&L for rorming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade ‘B’ etc., complete all as specified anddirected. |
| 109 | M&L for PCC (1:3:6) type C-1 (20 mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement etc., complete all as specified and as directed. |
| 110 | M&L for brocken stone or boulder Hard core of gauge exc 63mm but nor exc 100mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface etc., complete all as specified and as directed. |
| 111 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate)as in manhole cover slab set in CM (1:6) etc., complete all as specified and directed. |
| 112 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc., complete all as specified and directed. |
| 113 | Demolition of precast cement concrete block masonary work as in wall built in CM or cement lime mortar etc., complete all as specified and directed. |
| 114 | M&L for precast cement concrete block masonry exc. 10cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6) etc., complete all as specified and directed. |
| 115 | M&L for precast cement concrete solid building blocks or slabs type B1 (1:2:4) (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar etc., complete all as specified and directed. |
| 116 | M&L for PCC (1:2:4) type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement etc., complete all as specified and directed. |
| 117 | Dismantling and taking down old unserviceablepoint wiring of any type (light, fan, socket, power etc) complete with fitting such as switches, sockets, ceiling roses, pendants, lamp holders, light fitting etc including CI/ pressed steel terminals, switch box and making good the disturbed surface of wall/ floor etc to match with the existing surfaces of wall/ floor complete all as specified and directed. |
| 118 | Note :- (i) If the contractor fail to make good the disturbed surface of wall/ floor etc and do not match with the existing surface of wall/ floor to the entire satisfaction of Engr-in-Charge, a recovery of @ Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute, the decision of Accepting Officer will be final and binding.(ii) Old fittings/ fixtures / accessories like switches, sockets, lamp holders, regulators etc., if found in serviceable condition shall be removed carefully for reuse in the work or taking on charge. (iii) Only old unserviceable items will be considered in credit Sch. |
| 119 | M&L for point wiring with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable (FRLSH) with continious earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed, drawn in and including concealed PVC conduit \"medium grade\" (ISI marked), not less than 20mm dia duly concealed on wall/ ceiling or above false ceiling with fittings medium grade (Color coding of wires shall be phase, neutral and earth wire all as specified) sunk metal flush box suitable for modular fixture with and including decorative polycarbonate frame for housing modular switches, sockets, fan regulators etc including white cover plate complete all as specified and directed for following:-Note:- (i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface in CM (1:3) and matching with the existing surface deemed included in quoted rates. (ii)If the contractor fail to make good the disturbed surface of wall/ ceiling etc and do not match with the existing surface of wall/ceiling to the entire satisfaction of Engr-in-Charge a recovery of @ Rs. 50/- per RM will be made from payment due to the contractor. In case of any dispute the decision of Accepting Officer will be final and binding. |
| 120 | One light/fan/exhaust fan/call bell point controlled by one way 5 Amp switch. |
| 121 | One 5 pin socket out let 5/6 Amp on independent board. |
| 122 | One 5 pin socket out let 5/6 Amp on same board. |
| 123 | One light point controlled by two way 5 Amp switch. |
| 124 | Descrition same all as per item No 102 above, but with 4.0 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified & directed. |
| 125 | S&F modular switch piano, 1module, flush type button 5/6 Amp single pole one way conforming to IS: 3854 and ISI marked complete all as specified and directed. Make: Legrand cat No: 6734 01 or equivalent of make as specified. |
| 126 | S&F modular switch piano, 1module, flush type button 15/16 Amp single pole one way conforming to IS: 3854 and ISI marked complete all as specified and directed. Make: Legrand cat No: 6734 11 or equivalent of make as specified. |
| 127 | S&F modular socket outlet, 2 module, five pin 2 in 1, 5 Amps, flush type, 230 volts AC circuit complete all as specifiedand directed. Make: Legrand cat No: 6734 52 or equivalent of make as specified. |
| 128 | S&F modular socket outlet, 2 module, five pin 2 in1, 15 Amps, flush type, 230 volts AC circuit complete all as specifiedand directed. Make: Legrand cat No: 6734 55 or equivalent of make as specified. |
| 129 | S&F modular switch piano, 1module, flush type button 5/6 Amp single pole two way conforming to IS: 3854 and ISI marked complete all as specified and directed. Make: Legrand cat No: 6734 02/ Indoasian Cat No: 800001 or equilent make as specified. |
| 130 | S&F modular switch bell push button type, 1module,6 Amp single pole complete all as specified and as directed. Make – Legrand cat No: 6734 04 or equivalent make as specified. |
| 131 | S&F modular fan regulator electronic, 2module, stepped type, suitable for ceiling fans of any capacity, pre-wired 120/ 280 volts AC 50Hz supply 100Watt complete all as specified anddirected. Make: Legrand cat No: 6734 30 or equivalent others make as specified. |
| 132 | S&F ceiling rose surface bakelite 65 x 25mm dia three terminals (ISI Marked) complete all as specified and directed. Make – Anchor Jumbo Code-39050 / 3224 or equivalent of make as specified. |
| 133 | S&F bell electric DING DONG type,AC, 230V single pole, 2module complete all as specified and as directed. Make – Legrand cat No: 5734 43 or equivalent make as specified. |
| 134 | Dismantling and taking downu/s sub-main wiring/service wire of any size including wooden batten / PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding. |
| 135 | S&F sub main wiring alongwith earth wire (green colour) with single core FRLSH,PVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (medium grade) with standard accessories and earth wire connected with main earth dolly, of the following sizes of cable & dia of conduit complete all as specified and directed:-NOTE :- (i) Two/four run of single core FRLSH PVC cable with one/two run of earth conductor and conduit shall be measured as one unit (RM). (ii)The quoted rates shall be deemedto be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in CM (1:3) including finishing the surface to match with the existing surface.The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawal plugs. |
| 136 | 2x6 Sqmm+ 1x6 Sqmm earth wire with PVC conduit 20mm dia |
| 137 | 2x4 Sqmm+ 1x4 Sqmm earth wire with PVC conduit 20mm dia or more |
| 138 | 2x1.5 Sqmm+ 1x1.5 Sqmm earth wire with PVC conduit 20mm dia |
| 139 | M&L for cutting channels, grooves or rebates n\"exc 15cm girth and trimming surface with or without reinforcement complete all as specified and directed. |
| 140 | S&F LED tube light fitting 10 watt with high output diffuser 02 feet with ploycarbonate diffuser & integrated electronic driver, 240 volts, 50 Hz suitable to fix on surface, having suitable size drivers and all other connected accessories internally pre-wired and connecting up with suitable size copper cable three core of required length complete all as specified and directed.Make : Havells, Cat No. LUMILINEPLUSNEOBS10WLED865SPCSSINDS or equivalent of other make as specified. |
| 141 | S&F decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.Make : Havells, Cat No. LHFOAJE1TZ1I060 or equivalent of other make as specified. |
| 142 | S&F LED tube light fitting 20 watt, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with ploycarbonate diffuser & integrated electronic driver, 240 volts, 50 Hz suitable to fix on surface, having suitable size drivers and all other connected accessories internally pre-wired with 2x PVC round/square block for fixing of fittings and connecting up with suitable size copper cable three core of required length complete all as specified and directed.Make : Havells, Cat No. LUMILINEPLUSNEOBS20WLED840SPCSSINDS or equivalent make as specified. |
| 143 | S&F LED security light fitting 25 watt (in building peripheri/ street), energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing acrylic cover as diffuser with IP66 protection and impact resistance of IK08 including 1.5 Meter long bracket made out of light grade GI pipe of suitable dia and all necessary fixing arrangements and connecting with and including 1.5 Sqmm, 3 core copper conductor upto 1.5m complete all as specified and directed.Make : Havells, Cat No. ENDURASUNDOWNNXTSL25WLEDCWPASYBOPC or equivalent make as specified. |
| 144 | Excavating in trenches n\"exc 1.5 m width and n\"exc 1.5 m in depth for foundation/ for laying of cable etc n\"exc 10 sqm on plan and n\"exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 145 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 146 | Removal of surplus spoil to a distance n\"exc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 147 | Supply, laying, commisioning and testing of 1.1 KV grade XLPE insulated, PVC sheathed, steel armoured, aluminum stranded conductor LT UG cable (Conforming to IS:7098), ISI marked, in trenches / ducts / through GI pipes under roads offollowing size complete all as specified and directed:-Note:- 1. The earth work, GI pipe shall be measured and paid sepretely.2. Cable may fixing/ passing through pipe laid in trenches or fixed to pole/ wall or fixed to LT panel etc. |
| 148 | 35 Sqmm, 3½ core. |
| 149 | S&F including laying in trenches or in cable ducts or clamping on wall DWC HDPE pipeof size 50mm (OD) x 38mm (ID) along with connected accessories like couplers, bends, end caps etc for LT cable protection complete all as specified and directed. |
| 150 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground, earth pit not less than 2.25 mtr depth below ground level at any type of strata with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate, connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM (1:4) funnel with wire mesh, RCC pit cover of 320 x 320 x 80mm size PCC (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. |
| 151 | Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 152 | Disconnecting and taking out old damaged existing main switch/ distribution board of MCB/MCCB of any description from wall with and including all fitting and fixture and making good to disturbed surface of wall/ floor to match with the existing wall/ floor etc complete all as specified & as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/ floor to the entire satisfaction of Engr-in-Charge, a recovery of @ Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of Accepting Officer will be final and binding. |
| 153 | S&F connecting & testing, distribution board, VTPN, sheet metalenclosures, double door, 415V, IP-43 protection suitable for 100/ 125 Amp, MCCB as incomer andoutgoings MCB’s TP/SP, of following capacity complete all as specified and directed :- |
| 154 | DB 4 way Make : Legrand, Cat Part No. 5077 25 or equivalent make as specified. |
| 155 | S&F connecting & testing distribution board of sheet metal enclosures double door, IP-43, 240V, for using MCBs / MCB isolators with having tinted copper bus bars suitable for 200 Amps ratinghaving following capacity complete all as specifiedanddirected:- |
| 156 | DB SPN, 8 wayMake :-Legrand Cat Part No-5076 11 or equivalent others make as specified. |
| 157 | S&F MCCB 50 Hz, 415 V, adjustable type, having thermal magnetic release of following capacity complete all as specified and directed :- |
| 158 | 100Amp, 3 Pole,Icu= 25 KA,Make : Legrand, Cat Part No. 4200 45 or equivalent make as specified. |
| 159 | S&F connecting & testing MCB, 230V/ 415Vwith rupturing capacity 10 KA of following capacity complete all as specified and directed:- |
| 160 | MCB 6 to 32 Amp, SP, \"C\" series/ curve, Make :-Legrand, Cat Part No 4085 87 to 4085 95 or equivalent others make as specified. |
| 161 | MCB 6 to 32 Amp, SPN, \"C\" series/ curve, Make :-Legrand, Cat Part No 4086 09, 4086 12, 4086 14 to 4086 17 or equivalent others make as specified. |
| 162 | Taking down carefully ceiling fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan,make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fancomplete all as directed. |
| 163 | Taking down carefully Exhaust fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan,make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fancomplete all as directed. |
| 164 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 165 | 32/25mm bore |
| 166 | 40-50mm bore |
| 167 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :-Note :-80mm and 100mm bore pipe will be jointed by welding as directed at site |
| 168 | 25mm bore |
| 169 | 50mm bore |
| 170 | M&L for valve chamber of size 900mm x 900mm x 900mm (internal dimentions) with brick masonty valve chamber, 100mm thich PCC (1:4:8) type D2 as in foundation, 230mm thick brick wall built in CM (1:6), 50mm thich coping of PCC (1:3:6) type C1, 15mm thick plastering in CM (1:4) to all internal and exposed surface including necessary excavation and earth work in soft/loose soil, MS sheet cover 6mm thickness along with angle iron frame of size 40 x 40 x 5mm with locking arrangement with necessary fixing materials like hinges, nut bolts etc (valve chamber cover shall be opened in two valves) and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc with and including taking down/ dismantling old valve chamber complete all as specified and directed. |
| 171 | S&F in repair gun metal globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- |
| 172 | 25mm bore |
| 173 | 50mm bore |
| 174 | S&F in repair rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including ball valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank completeall as specified and as directed:- |
| 175 | Capacity 1000 Ltrs |
| 176 | S&F ball valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of following size complete all as specified and as directed :- |
| 177 | 25mm bore ( minimum weight 455gms) |
| 178 | M&L for cutting existing steel tubing (GI Pipe) for alterations or additions screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connection) complete all as specified and as directed |
