|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 2 | M&L for vitrifiedtiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n. exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 3 | M&L for vitrifiedtiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n. exc 0.42 sqmas in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 4 | M&L for glazedceramic coloured tiles of size 350x250x7mm thick,(premium quality)on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 6 | M&L for coloured vitrified heavy duty tiles dark shade (premium quality) of size 300mm x 300mm x 10 mm thick (square/ rectangular) polishedas in steps/stairs/raiser/vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 7 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in skirting/dado, steps, pillars, window sills, cooking platform laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including rounding edges of granite slab as directed by Engineer-in-Charge as required at site complete all as specified and directed. |
| 8 | M&L forPCC (1:3:6), type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete etc. complete all as specified and directed. |
| 9 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 10 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 11 | M&L for brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for rendering 20 mm thick in cement mortar (1:4) in two layers (12mm +8mm) on external faces of brick wall or concrete surfaces, finished even and smooth without using extra cement with using approved LWPC on second layer (8mm) as per manufacturer instruction after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.(Note : Liquid water proofing compound shall be measured and paid separately). |
| 14 | Supply only Liquid water proofing compound. |
| 15 | M&L for preparation of Oldplastered or un-plasteredwall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement) |
| 16 | M&L for preparation of Newplastered or un-plasteredwall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement) |
| 17 | M&L forapplying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick on new plaster surface strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE.(Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement) |
| 18 | Taking down chowkhats or frames(without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed. |
| 19 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame)exc 1.5 Sqmand n.exc 4 Sqm each and removing to store complete all as specified and directed. |
| 20 | Taking down Shutters of any description area exc 1 sqm and n.exc 2.0 sqm for each leaf and refixing in same opening after cutting, adjusting and easing all as specified and directed |
| 21 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS squarecomplete all as specified and directed. |
| 22 | S&F for 28 to 30 mm thick (stiles) Factory Made Solid PVC Moulded Door Shutter, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 23 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed. |
| 24 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.) |
| 25 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.) |
| 26 | S&F for 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and directed. |
| 27 | All as per item no. 23 here-in-before but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as speified and directed. |
| 28 | S&F for Powder coated anodised aluminium door shutters with powder coating not less than 50 micron of any colour, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 29 | S&F for powder coated anodised aluminium frame for doors and partition wall with one or more rebates including joining cleat for fixing etc. with powder coating not less than 50 micron of any colour complete all as specified and directed by Engineer-in-Charge |
| 30 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and direction by Engineer-in-charge. |
| 31 | M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanksand similar work conforming to Fe 290, Gde E-165 complete as in repair all as specified and directed. |
| 32 | M&L for PCC (1:2:4) type B-0,(using 12.5mm graded stone agregate) as in bands, bed blocks, fixing hold fasts, filling of door fames etc complete including necessary formwork complete all as specified and directed. |
| 33 | S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned tacks, or stainless steel wire staples in steel windows/ wooden doors complete as in repair all as specified and directed. |
| 34 | S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty/beads and pins/spring pins in squares n . exc 0.50 sqm in each paneto be fixed in any position at any hight upto to two story building after hacking out broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old galzing pins/ spring clips complete all as specified and directed. |
| 35 | S&F for 3 mm thick figured glass pin headed type and glazing with oil putty/beads and pins/spring pins in squares n . exc 0.50 sqm in each paneto be fixed in any position at any hight upto to two story building after hacking out broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old galzing pins/ spring clips complete all as specified and directed. |
| 36 | S&F for 4.8 mm thick tented glass type and glazing with oil putty/beads and pins/spring pins in squares n . exc 0.50 sqm in each paneto be fixed in any position at any hight upto to two story building after hacking out broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old galzing pins/ spring clips complete all as specified and directed. |
| 37 | S &F foraluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloycomplete all as specified and directed. |
| 38 | S & F for 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S & F for 150 mm long aluminium alloy handles, cast type, anodized complete all as specified and directed. |
| 40 | S & F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket complete all as specified and directed. |
| 41 | S&F for Powder coated anodised aluminium ventilator shutters and frame, (half fixed glass and half louvers) aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing lips, rubber lips, rubber packing anodized aluminium snap beading, screws, grills anodized aluminium snap beading, screws, grills anodized aluminium fittings such as peg stays 150mm long (3 Nos), Hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) etc. The vetilator system should be glazed with 4mm thick figured glass, pin head type of size as required in ventilator including taking out/ taking down old shutters complete all as specifed and directed. |
| 42 | S&F for 100mm size brass motrice lock, vertical type, two lever fixed in door complete as in repair all as specified and directed. |
| 43 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 44 | Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge. |
| 45 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.) (A) Area not exceeding 2.00 sqm each ® (B) Area exceeding 2.00 sqm each |
| 46 | S&F for door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete as in repair all as specified and directed. |
| 47 | Repair to exisiting steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable condition complete all as specified and directed.(Note: Rates for all necessary requirement for this repair work are inclusive in this item) |
| 48 | M&L for 15mm dia angular stop cock with wall flange cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwedfor iron pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-059KN or equivalent of Hindware/ Kohler/Parryware) |
| 49 | S&F for 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixedcomplete as in repair all as specified and directed.(Make:- Jaquar Cat No PRS-031/ Johnson Cat No T2001C/ Cera Cat No F9020101) |
| 50 | M&L for 15mm diabib tap long body with wall flange cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwedfor iron pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-107KN or equivalent of Hindware/ Kohler/Parryware) |
| 51 | S&F for 15mm bore fancy type chromium plated basin mixer hot and cold water screwed for wash basin, cast copper alloy with crutch or butterfly handle screwed for PVC Connection pipe or for brass ferrule and fixed complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-167KNB or equivalent of Hindware/ Kohler/Parryware) |
| 52 | S&F for Brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union complete as in repair all as specified and directed. |
| 53 | S&F for brass chromium plated wall mixer , 3 in 1 for system with provision for both Hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete as in repair all as specifiedand directed.(Make:-Jaquar, Cat No CON-217KN or equivalent of Hindware/ Kohler/Parryware) |
| 54 | S&F for PVC connection 15 mm dia withPTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed. |
| 55 | S&F for brass chromium plated tubular towel rail 20 mm dia 60 cm long with and including one pair of brass chromium plated brackets complete as in repair all as specifed and directed.(Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103) |
| 56 | S&F fo 8mm dia, 1.5 m long flexible tube with wall hook CP brass health faucent (hand shower) fixed to angle valve with back flow preventer complete as in repair all as speicified and directed.(Make:-Jaquar /Hindware/ Kohler/Parryware) |
| 57 | S&F for 600x450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete as in repair all as specified and directed. |
| 58 | S & F for Solid PVC Wall Lining consisting of 25mm thick PVC insulated with wood grain printed panels having expended polystyrene (EPS) stuck to 2mm thick wood grain PVC sheet duly fitted into the wall complete as in repair all as specified and directed. |
| 59 | M&L for applying two coats of texture paint of interior uses (premium quality as approved by GE) over one coat of alkali primer paint over a layer of smooth wall putty finish punning 2 mm thick over new plaster surface strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE.(Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement) |
| 60 | M&L for 18/19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work duly fixing of 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with external6mm thick teak wood lipping after dismantling boarding of any description in any position with nailscomplete all as specified and directed. |
| 61 | M&L for 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction over plywood, other wood surface etc. after dismantling of old unservicable lamination complete all as specified and directed by the Engineer-in-Charge. |
| 62 | M&L for 4mm thick E-board fixed in ceiling and including aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605x605 mm with aluminium main T section of size 36.5 x25 mmx 1.4 mm weighing 0.24 kg per running metre and cross T of size 23.5 x 26.4 x1.4mm weighing 0.191 kg per RM with aluminium wall angle size 40 x 25 x 2 mm including GI supporting wire of 3mm dia including dismantling of wall and ceiling (fibre, pulp, insulation board/salbs/blankets) complete all as specified and directed. |
| 63 | Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed. |
| 64 | M&L for point wiring (consealed) for one power point for one metal plug and socket set for AC or one socket for Geyser point on independent board controlled by one-MCB, 32 Amps (in and including) with 4.00 Sqmm. (nominal area) single core FRLSH,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid concealed PVCconduit of 20mm dia (Medium grade)complete with all acessories including PVC sunk box ISI marked and 4.00 Sqmm. (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making goodthe diturbed surfaces and taking out of existing conduits and plug and socket boxes etc compete all as specified and directed.(Note:-(a) Three run of copper conductor of required size and one run of PVC conduit and accessories measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth.(b) Quoted rates shall be deemed to be inclueded for copper conductor cable, conduit & accessories , MCB and sunken box of suitable size and cutting,chasing, penning for concealed point wiring n. exc 10 cm girth in brick wall/ concrete surfaces including making good the disturbed surfaces where required and pointing in cement mortar (1:3) with necessary matching existing colour duly putting etc. complete as directed.) |
| 65 | M&L for point wiring (consealed) for one light point/fan point/exhaust fan pont/ bell point controlled by one-one way 5/6 amp switchwith 1.5 Sqmm. (nominal area) single core FRLSH,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid concealed PVCconduit of 20mm dia (Medium grade)complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making goodthe diturbed surfaces compete all as specified and directed.(Note:-(a) Three run of copper conductor of required size and one run of PVC conduit and accessories measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth.(b) Quoted rates shall be deemed to be inclueded for copper conductor cable, conduit & accessories, cover plate and sunken box of suitable size and cutting,chasing, penning for concealed point wiring n. exc 10 cm girth in brick wall/ concrete surfaces including making good the disturbed surfaces where required and pointing in cement mortar (1:3) with necessary matching existing colour duly putting etc. complete as directed.) |
| 66 | Description all as per srl item No. 65 above but for one 5 pin, socket outlet,5/6 Amps on same board with other switches complete all as specified and directed. |
| 67 | Description all as per srl item No. 65 above but for one 5 pin, socket outlet, 5/6 Amps on independent board complete all as specified and directed. |
| 68 | Description all as per Serial item No 65above but for one 3 pin, 15/16 Amp socket outlet independent with2.5 sqmm PVC insulated FRLSH multistraind copper cable with 2.5 sqmm single core multistraind FRLSH copper cable as earthling lead complete all as specified and directed. |
| 69 | S&F for switch modular typeone way, 6 Amps 240 volts, with one module matching with existing plate complete all as specified and directed. |
| 70 | S&F for switch modular typeone way 16 Amps 240 volts, with one module matching with existing plate complete all as specified and directed. |
| 71 | S&F for shuttered socket outlet modular type6 Amps , 2/3 pin combined, 240 volts, with two module matching with existing plate complete all as specified and directed. |
| 72 | S&F for shuttered socket outletmodular type6/16 Amps , 2/3 pin combined, 240 volts, with two module matching with existing plate complete all as specified and directed. |
| 73 | S &F of modular type bell push button, flush type, 5 Amp complete as in repair all as specified and directed. |
| 74 | S&F for modular fan regulator stepped type, 120 watts, two module matching with existing plate complete as in repair all as specified and directed. |
| 75 | S&F for lamp holder, insulated body, with back plate suitable for batten/ angle fittings including 1x 9 watt LED white glass lamp, 230 volt base22 complete as in repair all as specified and directed |
| 76 | S&F for ceiling rose 3 phase, PVC/polycarbonate isolated body surface bakelite2 to 3 terminals fixed to wall/ceiling complete all as specified and directed. |
| 77 | M&L forsub main wiring (Concealed) complete with 02 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLSH type, PVC insulated, unsheathed, flexible, multi strandedduly colour coded cable drawn through and including concealed PVC conduit of size 32mm dia or above (medium grade) as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLSH type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items of any types complete all as specified and directed.(Note : -(a) 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC conduit and accessories shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).(b)Quoted rates shall be deemed to be inclueded for copper conductor cable, conduit & accessories and cutting,chasing, penning for concealed submain wiring n. exc 10 cm girth in brick wall/ concrete surfaces including making good the disturbed surfaces where required and pointing in cement mortar (1:3) with necessary matching existing colour duly putting etc. complete as directed.) |
| 78 | S&F for factory made sheet metal enclosure, double door (metal), 415 volts, AC, TPN distribution board 8 way painted with epoxy based powder coated suitable for mounting MCB complete with including 200 Amps rated copper busbar, neutral bar, earth bar, conneting cable links with and including top bottom removeable gland plate complewte with IP 43 protection complete as in repaire all as specified and directed. (Note:-MCBs will be measured separately.) |
| 79 | M&L for MCB, TPN/FP, 415 volts, 63 amps with rupturing capacity 10 KA, \"C\" curve, including providing thimble for out going cables complete all as specified and directed. |
| 80 | M&L for sheet metal enclosure MCB distribution board, double door (metal) single pole and neutral with IP-30 and IK 09 protection single phase 240 volts 8 way, including suitable size copper bus bar of 100 amp and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:-MCBs will be measured separately.) |
| 81 | M&L for MCB, SPN, 240 volts, 40-63 amps with rupturing capacity 10 KA, \"C\" curve, including providing thimble for out going cables complete all as specified and directed. |
| 82 | M&L for MCB, SP, 240 volts, 5-32 amps with rupturing capacity 10 KA, \"C\" curve, including providing thimble for out going cables complete all as specified and directed. |
| 83 | M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC CCT 6500K, smart extruded with driver, holderandincluding LED tube light connection Aluminium LED pattern (4ft) with higher effect complete. Microwave sensor to save more energy. Reduce the light intensity by 70% during non occupancy with three code flexible copper conductor cable suitable size from ceiling rose and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost).(Make: Havells, Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or Crompton, Cat No. CCS-103-20-65-SL-DP-NWH or equivalent in Philips) |
| 84 | M&L for LED Tube light fitting, complete with 1x 10 watts, 220V, AC CCT 6500K, smart extruded with driver, holderandincluding LED tube light connection Aluminium LED pattern (4ft) with higher effect complete. Microwave sensor to save more energy. Reduce the light intensity by 70% during non occupancy with three code flexible copper conductor cable suitable size from ceiling rose and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost).(Make: Havells, Cat No. LUMILINEPLUSNEOBS10WLED865SPCSSIND or Crompton, Cat No. CCS-103-10-65-SL-DP-NWH or equivalent in Philips) |
| 85 | M&L for 36 Watt LED recess mounting 3000k/6000k light fitting LED backlit square down lighter with high effcient LEDs with sensor & glate free opal diffuser IP20, internally prewired, 230 V, complete with all accessories such as electronic driver, connector block etc and necessary fixing arrangement at any height and removing old unserviceable light fittings with all connected accessoriescomplete all as specified and directed. (Note: Material required for safety harness, ladder and T&P etc will be provided by the contractor without any extra cost).(Make: Havells, Cat No. VENUSNEOHE2X2R36WLED840PIRSENSOR or Crompton, Cat No. LCTLRNM-36-FO-CDL or equivalent in Philips) |
| 86 | S&F for High efficacy 2\"x2\" recess LED flat panel light fittings 36W LED 6000K edge-lit luminaire with in and including LED lamp suitable for armstrong/grid ceiling complete for low ceiling applications complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as in repair all as specified and directed. (Make: Havells, Cat No. VENUSTREND2X2PLR36WLED865SWH or Crompton, Cat No. TCR-145-36-65-SL-NWH or equivalent in Philips) |
| 87 | S&F for modular white cover plate with frame, 1 module complete all as specified. |
| 88 | S&F for modular white cover plate with frame, 2 module complete all as specified. |
| 89 | S&F for modular white cover plate with frame, 3 module complete all as specified. |
| 90 | S&F for modular white cover plate with frame, 6 module with blank switches as required complete all as specified. |
| 91 | S&F for modular white cover plate with frame, 8 module with blank switches as required complete all as specified. |
| 92 | S&F for PVC exhaust fan of 200mm sweep, 220-240 Volt, 50 Hz with thermal overload protection (Approve by GE) complete as in repair all as specified and directed. (Make : Crompton Brisk Air/ Bajaj Maxima/ Havells Thrill Air/ Atomberg Efficio)(Note:- (i) Purchase voucher having GST No submitted by the contractor before claiming any paymet duly verified and defeced by the Engr-in-Charge(ii) Two years warranty shall be given by the appoved company of exhaust fan and contractor also) |
| 93 | Material and labour for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level )with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI wire 4mmby means of GInuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe light grade and connected to main distribution board/earthing test pointall as shown in electrical plate No 3 of SSR part 1 and all as specified including taking down old unserviceable earthing and testing of earthing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GIwatering pipe 20mm dia medium grade, wire mesh, protection pipe 15mm dia GI pipe light grade for earth lead upto 7.50m long complete all specified and directed. |
| 94 | Supply,laying, jointing and testing,XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.(Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE). |
| 95 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in any type of soil complete all as specified and directed. |
| 96 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed. |
| 97 | Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 98 | M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed.(Note: Punned thickness of sand shall be measured and paid). |
| 99 | M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat,size 230mm x 115mmx 75mm, complete all as specified and as directed. |
| 100 | M&L for boring of holes under road, pavement, hard standing by trenchless technology/manual excavation as necessary including machine, tools etc as per site requirement complete all as specified and directed. |
| 101 | M&L for 40mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for cable protection complete as in repair all as specified and directed. |
| 102 | S & F for epoxy powder coated sheet metal enclosure eith socket plug top and MCB, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 volts, C series current carrying capacity 10 KA, incl necessary connection complete all as specified and directed. |
