|
| 1 | Supply & Fixing inrepairs vitreous china squatting pan \"Orissa pattern size 580x440mm white with\"P\" or \"S\" trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection\"P\" trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply & Fixing in repairsvitreous china wash down water closet pan (pedestal pattern) white, with \"P\" or \"S\" trap (excluding flushing cistern and flush pipe) including seat cover and connection to drain and to flushing pipe complete incl making good to floor to match with adjoining surface and taking out existing WC complete all as specified and directed by Engr-in-Charge. |
| 3 | Supply & Fixing in repairs PVC valve less syphon action type low level flushing cistern 10 liters capacity with intel, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete and all as specified and directed by Engr-in-Charge. |
| 4 | Supply & Fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste couplingcomplete and fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply & Fixing in repairs viterous China urinal, bowl type back or corner wall type of size 465x355x265 mm complete with waste fittings including providing and fixing complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply & Fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply & Fixing in repairs 40 mm dia bore PVC flexible pipe for sink complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply & Fixing in repairs Jet Spray, cast copper alloy chromium plated body with PVC braided pipe of standard length for EWC complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply & Fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook ncluding making connections and fixed in position complete in all respect as specified and as direted by Engr-in-Charge |
| 10 | Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as specified and directed by Engr-in-Charge |
| 11 | Taking up or down GI tubing 20mm bore complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply & Fixing 15 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed by Engr-in-Charge |
| 13 | Refixing old steel tubing 15 mm dia and connection in new or old position complete all as specified and directed by Engr in charge. |
| 14 | Supply & Fixing 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed by Engr-in-Charge |
| 15 | Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directed by Engr in charge. |
| 16 | Supply & Fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply & Fixing in repairPTMT Bib tap any colour/high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply & Fixing in repairs 15mm dia Bib Taps, CP fancy type with crutch or butter fly handle screwed down pipe or for screwed iron pipe complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply & Fixingin repairs 15mm dia CP anglecockcast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply & Fixing in repairs pillar taps, 15mm bore cast copper alloy with capstern head, chromium plated screwed down high pressure with or without lettered hot or cold complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply & Fixing in repairs 600mm x 450mm x 5.5mm beveled edge mirror of selected quality glass, mounted on 6mm AC building board or commercial plywood and fixed of wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply & Fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply & Fixing in repairsbrass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed by Engr-in-Charge. |
| 24 | Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including disconnecting existing tanks and refixing in position after cleaning for 500/1000/2000 litres capacity of tank including writing of date of cleaning with stencil pattern.complete all as specified and directed by Engr-in-Charge. |
| 25 | Supply & Fixing in repairs 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colour three layers hoisted andfixed in position including GI tank nipple etc. complete andall as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity. |
| 26 | Supply & Fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colourthree layers hoisted andfixed in position including GI tank nipple etc. complete andall as specified and as directed by Engineer-in-Charge including dismantling existing water tank and removing from site of any capacity. |
| 27 | Supply & Fixing in repairs PVC lid for poly water storage tanks of capacity 500/1000/2000 Liters including PVC hinges and PVC locking both complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply & Fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply & Fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 30 | Material and Labour for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth all as specified and directed by Engr-in-Charge. |
| 31 | Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to store and rubnbish of the permises complete all as specified and directed by Engr-in-Charge. |
| 32 | Material and Labour for Glazed ceramic coloured tiles, of size 350x 250x 7 mm/ 450X 350X 7mm thick,as in skirting, dado set and jointed with neat cement slurryincluding pointing in white cement with pigment to match the shade of tiles including 10mm Thick vending on wall and the like to receive tile in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 33 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 Sqm but n.exe 0.18 Sqm, laid in floors set and jointed with neat cement slurryincluding pointing in white cement with pigment to match the shade of tiles, including 15mmthick Screedbed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 34 | Material and Labour for light shade vitrified tiles flooring 9-10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shedincluding 15mmthick Screedbed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 35 | Material and Labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick Screed bed or bedding layerin cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 36 | Material and Labour Non skid texturecoloured tiles, 10 to 15 mm thick (square or rectangular) area of each tile exe 0.06 Sqm but n.exe 0.11 Sqm, laid in floors set and jointed with neat cement slurryincluding pointing in white cement with pigment to match the shade of tiles, including 15mm thick Screed bed cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 37 | Dismantling PVC/Wooven flooring carper including cleaning the surfaces complete all as specified and directed by Engr-in-Charge |
| 38 | Material and Labour for 4mm PVC sheets laminated plain coloured,mottled finish, laid with approved rubber based adhesive in floors complete all as directed by Engr-in-charge |
| 39 | Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 40 | Material and Labour for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hard standing complete all as directed by Engr-in-Charge. |
| 41 | Material and Labour for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth, 75 mm thick and finished even and smooth without using extra cement, including demolition ofexisting cement concret. |
| 42 | Material and Labour for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded crushed stone aggregates as in sub base complete all as specified and directed by Engr-in-Charge. |
| 43 | Material and Labour for sand cushioning under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 44 | Material and Labour for 60 mm thick machine pressed precast concrete interlocking paver block any shape and sizeM-35 grade with grey cementand no pigment confirming to IS 15658-2006 complete all as specified and directed by Engr-in-Charge. |
| 45 | Material and Labour for PVC moulded vibratory system chequered cement concrete tileswith grey cement and pigments 30 cm x 30 cm x25 mm thick, set jointed and pointed in neat cement slurry to be laid over screed bed of 20mm thick in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 46 | Demolition brick work built in cement mortar of any description complete all as specified and directed by Engr-in-Charge. |
| 47 | Material and Labour brick work with sub class \"B\"brick straight or curved on plan exc 6M mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 48 | Taking down cementplaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water etc and complete all specified and as directed and directed by Engr-in-Charge. |
| 49 | Material and labour for 10mm thick cemet plalster in cement mortar 1:6 over brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 50 | Material and labour for 15mm thick cemet plalster in cement mortar 1:4 over brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 51 | Material and Labour for preparing of newly plasteredsurfaces of walls and applying two coats of oil bound distemper over a coat of primercomplete all as specified and directed by the Engineer-in-charge |
| 52 | Material and Labour for preparing newplastered or un-plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required camouflaging shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) complete all as specified and directed by the Engineer-in-charge |
| 53 | Material and Labour for preparing of old decorated surfaces and applying one coat of oil bound distemper on walls by roller brush including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, etccomplete all as specified and directed by the Engineer-in-charge |
| 54 | Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge. |
| 55 | Supply & Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.. |
| 56 | Supply & Fixing in replacement framed work as in doors or gates and sign boards of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 57 | Supply & Fixing MS plate 6 to 8mm thick plain, cut to shapeforming holes and welded to truss and verticle post all as required, complete confirming to Fe 410-W(Gde- 250)quality-B complete all as specified and directed by Engr-in-Charge. |
| 58 | Preparing new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 59 | Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed by Engr-in-Charge. |
| 60 | Supply & Fixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 61 | Supply & Fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 62 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 63 | Taking down carefully (copper/aluminium) point wiring for ceiling fan/light fitting in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engr-in-Charge. |
| 64 | Supply & Fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clipscomplete all as specified and directed by Engr-in-Charge. |
| 65 | Supply & Fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC framescomplete all as specified and directed by Engr-in-Charge. |
| 66 | Supply & Fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engr-in-Charge. |
| 67 | Taking down anti bird netting of any description at any position and any height complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply & Fixing of bird control nets of polyolefin all weather proof co-polymer, machine knotting using CNC machine with DSLS technology for anti slip knotting, mesh size 20mmx20mm and diameter of twine 01mm with 2mm dia border rope including 2mm dia tie ropes braided/ standard rope of polyolefin coplymers at an interval of 10ft having length of 6ft including fixing at any height / any location all as per manufacturers instructions complete all as specified and directed by Engr-in-charge. |
| 69 | Supply & Fixing in repairs 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws/welded complete all as specified and directed by Engr-in-Charg. |
| 70 | Supply & Fixing in repairs 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply & Fixing in repairs 250mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 72 | Supply & Fixing in repairs aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply & Fixing in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply & Fixing in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kgandfixed complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply & Fixing in repairs brass Mortice lock, vertical type, 4 levers, size 100 mm suitable for aluminum doors complete all as specified and directed by Engr-in-Charge. |
| 76 | Repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminiumsnap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engr-in-Charge. |
| 77 | Repair to uPVC door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing uPVC snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply & Fixing in repairs9 to 12 mm thick Pre laminated interior grade both sides laminated at bottom pane of aluminium door inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc;, supplying & fixing at complete all as specified and directed by Engr-in-Charge. |
| 79 | Supply & Fixing in repairs5.50mm thick glass fixed with rubber packing aluminiumsnap beading and metal pins in skelton shutters of doors and windows complete all as specified and directed by Engr-in-Charge. |
| 80 | Taking down shutters of any description exc 1sq.m and n exc2 sqm eachcomplete all as specified and directed by Engr-in-Charge. |
| 81 | Taking down chowkhats or frame n exc 1.50 sqm eachcomplete all as specified and directed by Engr-in-Charge. |
| 82 | Taking down chowkhats or frame exc 1.50 sqmbut n exc 4 sqmeach complete all as specified and directed by Engr-in-Charge. |
| 83 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Area exceeding 1.00 sqm but not exceeding 2.00 sqm each |
| 84 | Supply & Fixing for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge.NOTE :- All screws shall be self tapping chrome plated |
| 85 | Supply & Fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube including taking down with existing one Complete all as specified and directed by Engineer-In- Charge.NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. |
| 86 | Supply & Fixingfactory made PVC pre laminated door shutters 28 to 32mm thick with PVC hollow profile core with wood grain PVC sheet 5mm thick on one side, plain PVC 5mm thick sheet on back face, including taking down with existing one complete all as specified and directed by Engr-in-Charge. |
| 87 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips.Complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply & Fixing 4.80 mm thick glass sheet, ordinary quality and glazing with oil putty in square exc 0.5 sq.m ineach pane complete all as specified and directed by Engr-in-Charge. |
| 89 | Supply & Fixing 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws complete all as specified and directed by Engr-in-Charge. |
| 90 | Supply & Fixing 100mm size aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engr-in-Charge. |
| 91 | Supply & Fixing 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engr-in-Charge. |
| 92 | Supply & Fixing 250mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 93 | Supply & Fixing aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by Engr-in-Charge. |
