|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcandremoval of entire debris as ordered outside MD land complete all as directed. |
| 2 | M&L for rendering 15 mm thick in CM 1:6 on brick work/stone work or concrete surface work, finished the surface even and smooth without using extra cement complete all as specified. |
| 3 | M&L for rendering 5 mm thick in CM 1:3 on ceiling surface, finished the surface even and smooth without using extra cement complete all as specified. |
| 4 | Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness all as specified and directed. M/L for applying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as specified and directed |
| 5 | Three coats of white wash on newly plastered surface of ceilingafter necessary preparation of surfacecomplete all as directed. |
| 6 | Complete removalofany type treatment fromwall surfaces by rubbing, scrappingby hand held sander / long handle sander and washingand applying two coats of oil bound distemper by mechanical means / auto roller appliedover a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty complete all as directed. |
| 7 | M&L Preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed. |
| 8 | All as per item No 7 here-in- above but two coat of white wash. |
| 9 | M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etcby hand held sander / long handle sander(Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as directed. |
| 10 | M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered)of any description, rubbing, scrappingby hand held sander / long handle sander and washing and applying one coat of oil bound distemper by mechanicalmeans / auto roller complete all as directed. |
| 11 | All as per item No 10 here-in-above but twocoast of OBD -do- |
| 12 | M&L for prepration of newely plastered surface of walls including, cornices (plastered or unplastered)of any description, rubbing, scrappingby hand held sander / long handle sander and Jet pressure washing and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm applied by mechanicalmeans i.e Airless spray including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 13 | M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered)of any description, rubbing, scrappingby hand held sander / long handle sander and washing and applying one coat of cement base paint by mechanicalmeans / auto roller complete all as directed. |
| 14 | All same as per itemNo 13 here-in-above but two coats of cementbase paint on walls including scaffolding arrangenments as ordered -do- |
| 15 | Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 50 mtr and depositing where directed. |
| 16 | S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane completeall as directed. |
| 17 | S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each panecompleteall as directed. |
| 18 | M&L preparation of old painted wooden surfaces exc 10 cm width or girth all as specified in SSR Part-I and applying one coat of Ist quality synthetic enamel paint, complete all as directed. |
| 19 | All same as per itemNo 18 here-in-above but on steel surface -do- . |
| 20 | Removing complete shrubs/ vegetation upto root grown in any description such as grown in wall/ beam / roof /chajja etc in height up to three storeybuilding including filling the holes where the shurbs removed with cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15cm x15cm x 15cm or as requiredand making good the distured surface as per its original specification to the satisfaction Engineer-in-charge& removal of the taken out shurbs out ofMD land and disposed complete allas directed.Note for Periodicalitems : Note: 1. For measurement purposes in respect of those building for which audited periodical services measurement book are available, quantities shall be taken from PSMBs direct and entered in measurement book (IAFW-2261) and in respect of those buiidings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in measurement book in the usual manner.2. Any fittings or fixtures disturbed or damaged during the progress of work, will either be rectified or replaced by the contractor himself without any delay and at no extra cost to the Govt.3. Prior approval of colour shade/ tint is mandatory from GE (Central) Bangalore before commencement of work.4. The quoted rate aganist various items of above Schedule is deemed tobe inclusive of prepration of surface with Hand held sander / long handle sander, cleaning the wall/ ceiling surface with jet pressure washer, mixing putty with multipurpose mixer, appying Anti fungal paint with Airless spray appliance, and applying distemper & Plastic emulsion with Mechinal means / Auto roller as ordered. Engineer-in-Charge should ensure that Contractor\"s are obtained prior approvalof cleaning & application items before commencement of perodical work. |
