|
| 1 | Day to Day Maintenance including labour component |
| 2 | Attending day to day complaints of CARPENTER work i/c repairs of doors, windows, ventilators etc and other related works i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge. |
| 3 | Attending day to day complaints of MASON work i/c plaster repair, brick work, pointing, leakage complaints etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in -Charge. |
| 4 | Attending day to day complaints of PLUMBER work i/c repairs of water supply lines, flushing cisterns, overhead tanks and taps etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge. |
| 5 | Attending day to day complaints of SEWERMEN work i/c cleaning of sewer lines, man holes, gully traps, drains, water closet pans, urinals etc and other related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department , as per directions of Engineer - in - Charge. |
| 6 | Attending day to day complaints of BELDAR to assisting the Plumber/Carpenter/Mason/ Sewer men etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge. |
| 7 | ENQUIARY CLERK for entering the complaint in the complaint register and to assigned the Plumber/Carpenter/Mason/Sewermen/Weldar etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge. |
| 8 | Repairing Work |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete. |
| 11 | Size of Tile 600x600 mm |
| 12 | Distempering with 1st quality acrylic distemper c(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete : |
| 13 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gms/litre |
| 14 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade: |
| 15 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm) |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | Two or more coats on new work |
| 18 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 19 | Old work (one or more coats) |
| 20 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 22 | Old work ( One or more coat applied @ 0.90 ltr/ 10 sqm) |
| 23 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia |
| 24 | Providing and applyingputty @ 4.80 Kg/10 sqm over plastered surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge. |
| 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 26 | 5.0 mm thick glass panes (weight not lessthan 12.50 kg/sqm). |
| 27 | Renewal of old putty of glass panes (length) |
| 28 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 29 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames |
| 30 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item): |
| 31 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 32 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 33 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 34 | With stainless steel cover plate minimum 1.25 mm thickness |
| 35 | Providing and installing ACP sheet of thickness 3 mm with all fiting and fixture. |
| 36 | Providing and installing floor mounted glazing SS 304 lock of approved make. |
| 37 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wireof dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges brightfinished of required size |
| 38 | Second class teak wood |
| 39 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 40 | Finishing walls with textured exterior paint of required shade : |
| 41 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 42 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 43 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 44 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 45 | Second class teak wood |
| 46 | Chromium plated Brass screws 50 mm |
| 47 | Chromium plated Brass screws 40 mm |
| 48 | Chromium plated Brass screws 30 mm |
| 49 | Bright finished or black enameled mild steel screws 40 mm |
| 50 | Bright finished or black enameled mild steel screws 25 mm |
| 51 | Oxidised mild steel butt hinges 100x58x1.90 mm |
| 52 | Oxidised mild steel butt hinges 75x47x1.70 mm |
| 53 | Anodised Aluminium butt hinges 100x63x3.2 mm |
| 54 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 55 | Anodised Aluminium tower bolt (barrel type) 150x10 mm |
| 56 | Anodised Aluminium tower bolt (barrel type)100x10 mm |
| 57 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 58 | Anodised Aluminium handles 100 mm with plate 150 x 32 mm |
| 59 | Pressed steel door frames (mild steel sheet 1.60 mm) Profile \"B\" |
| 60 | SS Sink Jalli 4\" |
| 61 | CPVC brass FTA 1\" |
| 62 | CPVC brass MTA 1\" |
| 63 | Anchor Fastner - M10 |
| 64 | GI Fastener 100x8 mm |
| 65 | H.P. or L.P. ball valve with polythene floats: 15 mm dia |
| 66 | H.P. or L.P. ball valve with polythene floats: 20 mm dia |
| 67 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 68 | C.P. Brass Extension Nipple (1/2\"x2\" size) |
| 69 | G.I Nipple 4\" |
| 70 | CPVC Tank Nipple 1\" |
| 71 | CPVCUnion 15 mm nominal bore |
| 72 | CPVCUnion 20 mm nominal bore |
| 73 | CPVCUnion 25 mm nominal bore |
| 74 | CPVCUnion 32 mm nominal bore |
| 75 | CPVC elbow 15 mm nominal bore |
| 76 | CPVC elbow 20 mm nominal bore |
| 77 | CPVC elbow 25 mm nominal bore |
| 78 | CPVC elbow 32 mm nominal bore |
| 79 | CPVC socket 15 mm nominal bore |
| 80 | CPVC socket 20 mm nominal bore |
| 81 | CPVC socket 25 mm nominal bore |
| 82 | CPVC socket 32 mm nominal bore |
| 83 | G.I. Union 25 mm nominal bore |
| 84 | G.I Elbow 25 mm dia |
| 85 | M.S. Wire nails |
| 86 | 15 mm PTMT bib cock with flange (fancy) |
| 87 | 15 mm dia PTMT stop cock (male thread) |
| 88 | PTMT pillar cock |
| 89 | PTMT angle valve |
| 90 | PVC pipe 4\" |
| 91 | PVC elbow 4\" |
| 92 | PVC Tee 4\" |
| 93 | PVC Tee 4\" with door |
| 94 | PVC socket 4\" |
| 95 | Bib cock face |
| 96 | Mirror of superior make glass 60x45 cm |
| 97 | Brass 100mm mortice latch and lock with 6 levers without pair of handles |
| 98 | Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 99 | 600x120 mm glass shelf with anodised aluminium angle frame,C.P. brass brackets and guard rail of standard size |
| 100 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fi tings |
| 101 | C.P. brass toilet paper holder of standard size |
