Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 2 | Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey and directedcomplete all as specified. |
| 3 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 4 | M&L for RCC 1 : 2 : 4 type B0 using 12.5 mm graded stone agg as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chhajas and in shelves and the like all as specified and directed. |
| 5 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 6 | M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 7 | Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed |
| 8 | M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 9 | Rounding to edges of stone slabs one edge, such as in steps cooking platefom,and other similar situations complete all as specified and as directed |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises |
| 11 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed. |
| 12 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 13 | S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 14 | M&L for 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed |
| 15 | All as per item No 14 here in before but as in skirting laid over and including 10mm thickbacking coat ofcement mortar (1:3), complete all as specified and directed. |
| 16 | S&F in repair vitreous china squatting pan,(Orissa pattern) size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trapetc complete including making good to floor, complete all as specified and directed |
| 17 | S&F in repair Vitreous china wash down water closet pan sinlge piece syphonic action, white fixed in repair,including soft close sheet cover of closed pattern with flat bottomcomplete. Cat part No Hindware 20121 or equivalent including dual flushing cistern viterous china 10 ltr capacity complete all as specified. |
| 18 | Demolition of cement concrete in above ground floors exc 15 cm thick above ground floors. |
| 19 | M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces(Make of tapercreate M/S CICO Engg Services) then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm.(Make of fibre glass cloth M/S The Structure Water Proofing Co Pvt Ltd) and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours all as directed. |
| 20 | M&L for 10 mm thickcement plaster on brick/ concrete surface in CM 1:3, finished even and fair surface with outusing extra cement but mixing water proofing compound at the rate of 2% of cement by weight (WPC shall be paid separately). |
| 21 | M&L Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified. |
| 22 | M&L 75 mm thick PCC type D2 (1:4:8)using 40 mm graded stone aggregate as in sub base offlooring. |
| 23 | M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors finished rough. |
| 24 | S&F in repairs PVC low level white flushing cistern valveless symphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified. Make-Cera/parryware/hindustan all as specified. |
| 25 | S & F in repairs 15 mm dia 600mm long PVC connectionswith brass check nut complete Make Polytuff/symet or equivalent |
| 26 | S&F in repair vitreous China wash hand basin (pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste PTMT pipe & waste coupling 32 mm dia including all necessary fitting and fixtures complete all as specified |
| 27 | S&F counter sunk vitreous china wash hand basin of size 550x400x140mm , ivory,including waste coupling and waste pipe complete all as specified and directed. |
| 28 | S&F in repair PVC waste pipe 32/40 mm bore, 65 cm long for sink etc complete. |
| 29 | S & F Bevelled edge toughened glass mirror of 5 to 6 mm thick selected quality glass of required size, mounted and fixed to wooden plugs with Chromium plated brass screws and cup washers, complete. |
| 30 | S & F in repairs Chromium plated brass overhead shower rose 125mm with arm complete all as specified and directed. |
| 31 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 32 | S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 33 | S&F in repair stainless steel sink with drainage board standered size made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union with bowl size410x330x160mm complete all as specified and directed. |
| 34 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed. |
| 35 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed. |
| 36 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 37 | S&F 20mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 38 | S&F 25mm outer dia CPVC pipes SDR 11 withand including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 39 | S&F20mm outer dia CPVC Brass Elbow complete all as specified and directed. |
| 40 | S&F20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 41 | S&F25mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 42 | S&F20 mm outer dia CPVC Brass Tee complete all as specified and directed |
| 43 | M&L for rotational moulded polyethylene water storage tanks white colour500 lts capacity, four layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing 500 Ltr unserviceable PVC tank of any description including fitting and fixtures complete all as specified. |
| 44 | M&L for rotational moulded polyethylene water storage tanks white colour1000 lts capacity, four layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing 1000 Ltr unserviceable PVC tank of any description including fitting and fixtures complete all as specified. |
| 45 | M & L for disconnecting existing tanks, capacity exc 500 & not exe 1000 Litres, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position complete all as specified and as directed by the Engineer-in-Charge |
| 46 | Demolition and breaking up bath toilet and kitchen sewage vertical pipe and (CI,AC etc) 75/110 mm set in any cement mortar of any diameter incl bend. Note - CI pipe removed and provision of PVC pipe 75 mm and 100 mm pipe provided and will be paid on respective items. |
| 47 | S&F for PVC (SWR) bends any radius, 110 mm bore complete. |
| 48 | S&F for PVC (SWR) bends any radius, 75 mm bore complete. |
| 49 | S&F for 110 PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 50 | S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 51 | S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified and as directed. |
| 52 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, of 110 mm dia complete all as specified and directed. |
| 53 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete. |
| 54 | M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete. |
| 55 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade \"A\" |
| 56 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 57 | M&L for 5 mm thick rendering with redimix plaster (as per manufaturer\"s instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement onceiling of up to four stories bldgs. |
| 58 | M&L for 10 mm thick rendering with redimix plaster (as per manufaturer\"s instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement onwall of up to four stories bldgs. |
| 59 | M&L for 15 mm thick rendering with redimix plaster (as per manufaturer\"s instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement onwall of up to four stories bldgs. |
| 60 | M&L preparation of new plaster surfaces of wall and ceiling applying1 to1.5 mm thick water proof wall care putty complete all as specified and as directed including Applying two coats on old surfaces wall/ceiling with Graco-490 spray machine, of Green Pro certified water-based, modified acrylic, exterior Emulsion (1st quality) over a coat of primer as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work”. |
| 61 | M&L for complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller. over 2 mm thick water proof wall care puttyM&LApplying two coats on old surfaces wall/ceiling with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exteriorEmulsion (1st quality) over a coat of primer as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work”.Note - Primer should be compatible with the paint. |
| 62 | M&L for waterproof putty @ 1 Kg (undiluted) per sqm of average thickeness 1-2 mm over the new plastered surfaces wall/ceiling new surface with machenical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step - 1)Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2)Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSIStep - 3)Allow 6-8 hrs time to dry the putty surface.M&L for applying two coats of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose langth of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as secified and directed.Note: Sanding of surface to be done by mechanical sander with 150 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 63 | M&L for complete removal of existing treatment (OBD/oil paint/white wash etc)by scrapping with mechanical wall sander on wall/ceiling (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint.removal of nails etc & filling cracks/hole & windows/doors jams repair in good shape by skilled labour M&L for oilbound distemper over waterproof putty @ 1 Kg (undiluted) per sqm of average thickeness 1mm over the plastered/old painted wall/ceiling after scrapping to prepare the surface with machenical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step - 1)Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2)Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step - 3)Allow 6-8 hrs time to dry the putty surface. |
| 64 | Demolition of brick workbuilt in cement or cement lime mortar complete all as specified and directed. |
| 65 | M&L brick work in cement mortar (1:6) using sub class \"B\" bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified. |
| 66 | Taking down chowkats or frameswith shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete. |
| 67 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete. |
| 68 | Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 69 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed. |
| 70 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge..(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 72 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 73 | Supply and fixing factory made uPVC white colour Three track three panels sliding Door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and direct. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & widthof profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 74 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mmthick including aluminum anodized “D\" handle, hinges, peg stays, tower bolts, etc includingjointing cleats for fixing builder\"s hardware fittings & 4 mm thick selected quality frosted and plain glass including necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 75 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc includingjointing cleats for fixing builder\"s hardware fittings & stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesincluding necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 76 | S & F for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 77 | S&F 100mm sizebutt hinges stainless steel of AISI 304 complete all as specified and directed. |
| 78 | S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed. |
| 79 | S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all as specified and directed. |
| 80 | S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed. |
| 81 | M&L in repairs for 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform, in Cupboards or below counter top washbasins including all necessary fittings and fixtures and dismantling existing boardingcomplete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE. |
| 82 | S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. |
| 83 | S& F stainless steel plate rack made of 1 mm thick stainless steel sheetof size 750 mm x 900 mm x 210mmconsisting of 3 shelf for bowls and one shelf for keepingsix nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE\"s officeall as specified and directed by engr-in-chargecomplete. |
| 84 | S & F CP clip on hinges (Inset) complete all as specified and directed . |
| 85 | S&F SS tower bolt size 125mm complete. |
| 86 | S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed. |
| 87 | M&L for preparation of old painted surfaces of wood & wood based surfaceof any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 88 | M&L for preparation of old painted surfaces of steel & steel based surfaceof any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 89 | S&F, 25 mm dia SS curtain rods (minimum 1.50 mm thick sheet) fancy type, including SS bracket and SS side bulb decorative type complete for doors and windows complete all as specified. |
| 90 | Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified. |
| 91 | S&F in repair CP brass health faucet with hand shower and 1.5 mtr flexible stainless steel pipe suitable for fixing to 15 mm dia pipe complete. |
| 92 | S & F in repair Toilet paper holder of mild steel Chromium plated ‘D’ type, fixed in repairs to walls with chromium plated brass screws complete. |
| 93 | S&F in repairs 6 mm thick glass corner shelf fancy type (Set of 03) with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge) |
| 94 | S&F in repairs 6 mm thick glassshelf fancy type 600MM LONGwith railing and fitting below WHB mirror completeof best quality (as per sample approved by Engr -in-charge) |
| 95 | S&F in repairs wash hand basin mixer single lever 15mm dia CP brass fancy type including joints to CPVC pipe or unions all as specified. |
| 96 | S & F in repairs Brass CP Wallmixer(Non Telephonic Type) with L bend 3-in-1 for mixing hot & cold water screwed down for CPVC pipe15 mm bore and fixed complete all as specified. |
| 97 | S&F in repairs Kitchen sinkmixer15mm dia CP brass fancy type including joints to CPVC pipe or unions all as specified. |
| 98 | Supply, fabrication & installation of box-type modular kitchen cabinets (below/above counter) up to 600 mm depth (or as per actual size at site) made of 18 mm thick HDHMR pre-laminated waterproof & termite resistant board for top, bottom, back, partitions, drawers, shelf etc. Shutters & exposed surfaces made of 18 mm thick HDHMR laminated with 1.5 mm thick acrylic high gloss sheet on one side and 0.8 mm balancing laminate on other side, factory pressed. Edges finished with PVC edge banding tape applied by edge bending machine etc including auto closing spring loaded hinges(hydraulic type), magnetic catchers, SS handles stainless, steel soft closing heavy type telescopic drawers channel etc complete all as per approved shop drawing and as directed.Notes :- i) Fittings & fixtures shall be deemed to be included in rate quoted by the tenderer.ii) The measurement for payment shall be based on the superficial area of the modular kitchen cabinets. |
| 99 | S & F Modular Cabinet Kitchen accessoriesof Stainless Steelgrade-304, 6mm thick rod including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket,(iv) Cup & saucer basket, (v) Glass basket,(vi) Plate basket, (vii) Premium magic corner(viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all specified and directed. |
| 100 | M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 101 | M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified . |
| 102 | Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the materialincluding making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge. |
| 103 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etcof required size completeincluding 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) .Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. |
| 104 | All as per item No 2 above but 5 Amp socket outlet on same board. |
| 105 | All as per item No 2 above One socket outlet 5 Amps on independent board. |
| 106 | All as Item No 2 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete. |
| 107 | All as Item No. 2 above but for onelight point controlled by two 2-way switches with cable 1.5 Sqmm size. |
| 108 | M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn throughconcealed PVC conduit completeincluding 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete |
| 109 | S&F switch modular type, 1 way 6A, 1module. |
| 110 | S&F switch, Modular switch 2 way 6A, 1 module. |
| 111 | S&F Modular Socket, 6A - 2/3 pin 2 module. |
| 112 | S&F Modular AC box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement, complete all as specified and directed. |
| 113 | S&F switch modular type 1way 16A, 1module with indicator |
| 114 | S&F Socket 6A/16A - 2/3 pin combined . |
| 115 | S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified. |
| 116 | S&F Modular Bell push 6A 1 module |
| 117 | Supply and fixing LED lights fitting 1x 20W, 220V, AC aluminium housing decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete. |
| 118 | Supply and fixing LED lights fitting 10W, 220V, ACdecorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete. |
| 119 | S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate all as specified and directed. |
| 120 | S&F of LED lamp 12 Watt LED Re-Chargeable Bulb complete all as specified and directed. |
| 121 | Taking Down of ceiling Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. |
| 122 | Taking Down of Exhaust Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. |
| 123 | S&F Fan step regulator, 120W - 2 module type complete all as specified and directed. |
| 124 | S&Fin replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed. |
| 125 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 126 | S&F in replacement ofLED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITEincluding all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed. |
| 127 | S&F ceiling rose surface Bakelite 65x25mm three terminals complete all as specified. |
| 128 | Taking Down of Geyser and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. |
| 129 | S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 130 | Supply and fixin replacement of MCB DB SPN 16 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed . |
| 131 | S&F in replacement MCB SPN 63 Amps \"B\" series, breaking capacity 10 Ka, \"B\" curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. |
| 132 | S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B\" curve all as per site requirement and as directed. |
| 133 | The furniture articles shall be prepaired smooth after removing dents or tightning the frame with welding if required or providing any screw/ nut & washir if required, applying putty for planning of surfaces. All new parts/ area where there is no old paint exists, one coat of primer of best quality as approved shall be applied. The painting shall be done after prepration of surfacespaint OG/ Black/ White/ Sky Blue/ Grey replacing the existing shade/ colour achieving its glossy look. Rest all as directed by Engr in charge/ Accepting officer. |
| 134 | Almirah Large Steel/ Alm MAP or 1/2H 1/2 Shelves etc |
| 135 | Almirah Med Steel |
| 136 | Chari Varandha |
| 137 | Charpoy Folding IP |
| 138 | Charpoy IP Ply Top : FD/MAP-II/01 |
| 139 | Rack Shoe Steel |
| 140 | Teapoy Varandha |
| 141 | Table Computer |
| 142 | Material and labour for polishing to the wooden furniture articles. Polishing the articles shall be cleaned up with a clean cloth and applying suitable sandpaper paper to remove dirt/ dust. The furniture articles/ parts shall be prepaired smooth after removing dirt/ dust etc, making wooden surfaces smooth by applying wood filler and putty on cracks / jonts and applying suitable colour to the base for prepration of base. Two coats of best quality polish as approved shall be applied for glossy look. The polishing shall be done only after prepration of surfaces. Rest all as directed by Engr in Charge/ Accepting Officer. |
| 143 | Bed Plywood Top : FD-246/247 |
| 144 | Bin linen |
| 145 | Chair Dining : FD-279/16/250/228/MAP JCO-OR |
| 146 | Chair Dining long back/ MAP |
| 147 | Chair Easy : FD/-229/201/17 |
| 148 | Hat Stand with mirror |
| 149 | Peg Table : FD-277/384, DB-3973 |
| 150 | Side board |
| 151 | Sofa Set 4 Seats |
| 152 | Sofa Set 5 Seats |
| 153 | Stool drssing |
| 154 | Table Centre : FD-274/ 235 |
| 155 | Table Dining 6/8 Pers |
| 156 | Table Wiring |
| 157 | Teapoy : FD-278, 34, 382 |
| 158 | Supply and fixing in repairs, SS Chrome plated handles for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2 H 1/2 S after removing old damaged/ wornout chrome handles. |
| 159 | Supply and fixing in repairs, Locks with duplicate keys for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2H 1/2 S after removing old damaged/ unserviceable locks. |
| 160 | Supply and fixing the SS knobs screw type to wooden steel furniture articles in repair/ replacement after removing the existing damaged knobs making the furniture drawers functional. |
| 161 | Supply and fixing pin type PVC caster wheels to the chair revolving long back/ chair revolving/ chair computer and all other similar chair revolving after removing old damaged caster wheels and fixing the new caster wheels with proper workmanship to make functional the chair. |
| 162 | Note for the above work : The contractor is required to provide a person proficient in speaking English & Hindi with a mobile with a SIM, computer, printer & internet connection to access the Complaint Mgt Portal for taking complaints through call VYNUS (Online Complaint ManagementSystem) & whatsapp. The place for establishing the complaint cell will be provided by GE. The ibid person shall note down the complaint in register & deploy resources for cleaning complaints within working hours. The report of complaint shall be noted in the register and shall be shown to AGE/JE every day before closure of office/ working hours.Rates for ibid service is deemed to be included on quoted rates of BOQ. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
