|
| 1 | Schedule \"A\" Part-I (B/R Work) |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub-class `B\" bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 4 | M&L for brick work with sub class \"B\" bricks (using old size bricks) straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:6, complete all as specified and directed. |
| 5 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 6 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 8 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall careputty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. |
| 9 | Preparation of new plastered surfaces of walls andapplying two coats of anti-fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty, complete all as specified and directed. |
| 10 | Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 11 | Preparation of old surface of wall and applying two coats of cement base paint, complete all as specified and directed. |
| 12 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 13 | M&L for Vitrified tiles, coloured, size 600 x 600 x 9mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed |
| 14 | M&L for Vitrified tiles, coloured, size 600 x 600 x 9mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 15 | M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing / grinding and polishing upto mirror finish complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 16 | M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 15mm thick backing coat in CM 1:6, complete all as specified and directed. |
| 17 | M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 18 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 19 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 20 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. |
| 21 | S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. |
| 22 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 23 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 24 | S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 25 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 26 | S&F Powder Coated aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. |
| 27 | S&F anodised aluminium powder coated door shutter with frame (minimum thickness of powder coating 50 micron of approved colour), partly glazed with 5mm thick tinted glass and partly panelled with 9mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size, mortice lock etc. all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021)(b) Vertical members of shutter section shall be be of size 85.00 x 44.45 x 2.00mm (Section No 19560)(c) Top members of shutter section shall be be of size 83.50 x 44.45 x 2.00mm (Section No 19581)(d) Lock rail (middle member) of shutter section shall be be of size 150.00 x 44.45 x 3.00mm (Section No 19596)(e) Bottom members of shutter section shall be be of size 150.00 x 44.45 x 3.10mm(Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80mm thick (Section No 19370).Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A(ii) Floor door spring will be measured & paid separately. |
| 28 | S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed. |
| 29 | S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 30 | S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. |
| 31 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 32 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 33 | S&F 140mm floor door stopper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed. |
| 34 | S&F 1.25mm thick of laths of steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type, complete all as specified and directed. |
| 35 | S&F 100mm long Safety lever locks mild steel with 4 levers for rolling shutters,complete all as specified and directed. |
| 36 | S&F ball bearing for rolling shutters, complete all as specified and directed. |
| 37 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-410- W (GdeE-250) quality B (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed. |
| 38 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 39 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 40 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 41 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed. |
| 42 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 43 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 44 | S&F 12mm thick gypsum board in ceiling fixed with screw of size 600x600mm as per manufacturers instructions including necessary jointing and taping and applying 1mm thick putty to receive finishes, complete all as specified and directed. |
| 45 | S&F in repairs 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI / aluminium framework with screws to ceiling flat or sloping, complete all as specified and directed. |
| 46 | Preparation of new or previously untreated plaster/ AC sheet / Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour / tint, complete all as specified and directed. |
| 47 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 48 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. |
| 49 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in soft/loose soil, complete all as specified and directed. |
| 50 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) in bed blocks for hold fast and as in roof kerb benching & similar work etc. complete all as specified and directed. |
| 51 | Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed. |
| 52 | M&L for Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed. |
| 53 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 54 | M&L for 50mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 55 | M&L for 75mm thick plain cement concrete, 1:3:6, type C-2(using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without extra cement, complete all as specified and directed. |
| 56 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. |
| 57 | M&L for Reinforced cement concrete, 1:1.5:3, Type A-1 (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 58 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 59 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 60 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 61 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Flat rough finished surfaces of concrete complete all as specified and directed |
| 62 | Formwork for rough finished surfaces of concrete to sides and soffits of floor beams, roof beams, beams, haunchings, girder, lintels, cantilevers, shelves including supports overhangs etc., complete all as specified and directed. |
| 63 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. |
| 64 | Formwork to sides of pillars, posts, struts, piers, columns and stanchionson fair finished surfaces, complete all as specified and directed. |
| 65 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 66 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 67 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. |
| 68 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 69 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed . |
| 70 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed . |
| 71 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed . |
| 72 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 73 | S&F 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. |
| 74 | S&F 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. |
| 75 | S&F 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. |
| 76 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 77 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 78 | S&F in repairs vitreous china, table top, wash hand basin of size 600mm x 435mm x 180mm, fancy type, including 32mm dia CP waste coupling and waste pipe, complete all as specified and directed. |
| 79 | S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. |
| 80 | S&F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 81 | S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed. |
| 82 | S&F in repairs vitreous China urinal half stall type, white, suitable for childrens with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colourfor fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed. |
| 83 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed. |
| 84 | S&F CP Jet Spray of Standard size for EWC along with CP connection and all fittings as fixed, complete all as specified and directed. |
| 85 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. |
| 87 | S&F in repairs 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 88 | S&F in repairs 15mm bore shower rose cast copper alloy, chromium plated with swivel joints, fancy type with CP neck9\" long made to shape, complete all as specified and directed. |
| 89 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed. |
| 90 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. |
| 91 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 92 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges, complete all as specified and directed. |
| 93 | S&F in repairs soap dish, brass chromium plated any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 94 | S&F in repairs toilet paper holder, vitreous China, box type, white,fixed to walls with chromium plated brass screw, complete all as specified and directed. |
| 95 | S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed. |
| 96 | S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed . |
| 97 | S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 98 | S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 99 | M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. |
| 100 | S&F 20mm bore stop valves, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 101 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 102 | M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m, complete all as specified and directed. |
| 103 | M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing andpointing to match existing work in CM 1:4, complete all as specified and directed. |
| 104 | M&L forMild steel round bars of 10mm dia and over,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 105 | M&L for MS TMT bars 05mm dia and over upto 10mm in in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 106 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250) quality-B,complete all as specified and as directed. |
| 107 | S&F 25mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 108 | Preparation of new surface of wall and applying two coats of cement base paint over one coat of primer, complete all as specified and directed. |
| 109 | Schedule \"A\" Part-II (E/M Work) |
| 110 | M&L for Point wiring for light / fan point controlled by one way switch 6 Amps 240 volts with 1.5 sqmmcopper conductor FRLSH(multistrand) PVC insulatedISI marked unsheathed copper wire 1100 volt grade in and including concealed conduit, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 111 | All as per Ser item No 108.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on independent Board. |
| 112 | All as per Ser item No 108.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmmfor 15 Amps power point. |
| 113 | S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified anddirected. |
| 114 | S&F modular Socket6 Amp, 230 volts,5 Pin universal, 2 Module, complete all as specified and directed. |
| 115 | S&F Modular switch 1 way, 16 Amp, 240 volts, 1 Module, complete all as specified and directed. |
| 116 | S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed. |
| 117 | S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. |
| 118 | S&F 20 Watt LED batten extruded 4 feet length, Al body with PC diffuser in unique square shape > 120 degree wide distribution, minimum efficacy 120 lumen / Watt, CCT 6500 K complete including connection upto ceiling rose with flexible copper twin twisted wire, complete and all as specified and directed. |
| 119 | S&F LED 15 Watt ceiling light, warm type with high output, 220 V AC, colar tempature 3000K with all accessories IP protection dust and water resistant, surge protection upto 2.5 kV PC opal high efficency diffuser, LM 80 tested made die cast aluminium housing with complete asssembly, suitable for surface / wall mounted with driver holder including connecting up using 1.5 Sqmm copper conductor multistarand PVC insulatyed cable of suitable size, complete and all as specified and directed. |
| 120 | S&F LED 15 Watt ceiling spot light, warm type with high output, 220 V AC, colar tempature 3000K with all accessories IP protection dust and water resistant, surge protection upto 2.5 kV PC opal high efficency diffuser, LM 80 tested made die cast aluminium housing with complete asssembly, suitable for surface / wall mounted with driver holder including connecting up using 1.5 Sqmm copper conductor multistarand PVC insulatyed cable of suitable size, complete and all as specified and directed. |
| 121 | S&F LED strip light warm type with high output, 220 V AC, colar tempature 3000K with all accessories IP protection dust and water resistant , surge protection upto 2.5kV PC opal high efficency diffuser, LM 80 tested made die cast aluminium housing with complete asssembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 Sqmm copper conductor multistarand PVC insulatyed cable of suitable size, complete and all as specified and directed. |
| 122 | S&F MCBsingle pole and neutral ISI marked `C\" seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 32 Amps 10 KA breaking, capacity etc all as specified and directed. |
| 123 | Supply, installation, commissioning and testing Gas Battery outlet Valve 1/4 \" SS Pipe abd Flare 37* Male , No.4 Direction Must face down, capacity etc all as specified and directed. |
| 124 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour), complete all as specified and directed. Note : Note :2 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 125 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 2.5 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 2.5 Sqmm (in green volour), complete all as specified and directed. Note : Note :2 runs of 2.5 sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC conduit shall be measured as one unit. |
| 126 | Supply, installation, commissioning and testing high wall with cordless remote with inbuilt Heating and Cooling arrangement split type air conditioner of capacity 1.5 TR suitable for non CFC refrigirant gas including material and labour for the following works invalved for smooth functioning & installation of outdoor / indoor for split type AC, complete all as specified and directed by Engr-in-charge.(a) Fixing the heating & cooling unit with grounting nuts, cutting groove to wall for gas pipe and water drainage pipe complete.(b) S&F copper pipe of appropriate size including cutting, bent to shapefrom outdoor unit to indoor unit by cutting holes to wall including brazing the copper pipe, fixing union all as required at site.(c) S&F 20mm dia PVC pipe, transparent flexible heavy duty for drainage pipe (approx-3.0m).(d) Insulation of both the copper pipe with insulating material and covering the complete pipes with PVC casing & caping of size 75x75mm for mechanical protection of copper pipe complete. |
| 127 | (e) Charging of correct quantity non CFC refrigerant gas after necessary brazing / fixing of both the outdoor / indoor unit and testing complete on loadup to saitisfaction of EIC.(f) S&F MS bracket factory made, fixed on wall through fastener of appropriate size and guage for installation of out door unit (condensing unit) complete all as direced.(g) M&L for provision of shed for outdoor unit made of MS sheet 2.0mm thick and MS angle 30x30x5mm.Note: Cost for all other connected civil works and other miscellaneous works required for installation of split AC & copper functioning as directed by Engr-in-charge shall deemed to be included in quoted rate. |
| 128 | Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 10 Sqmm 2 core, conforming to IS 1554 Part I / ISI marked, 1100 Volt grade on cable trays with suitable clamps, saddles, hooks, bolts etc. complete as per specifications and as required. The quoted rate shall include the cost of proper dressing of cables and also providing identification tags as required, complete as specified and directed. |
| 129 | S&F copper tubing of size 3/8\" special annealed pressure copper purity min 99.9% and making flairing at both ends for connection incl brass nut and testing in existing split type air conditioner of any descrtiption/ capacity/make and in any positionincl insulating with suitable size insulation, complete all as specified and directed. |
| 130 | S&F Voltage stabilizer for automatic operation single phase naturally air cooled, indoor type, and designed for input varition between 180V to 250V with output voltage stabilized at 230 V with accuracy of +/-2.5% and of capacity of 5 KVA, completeas specified and as directed. |
| 131 | Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole, stay, laying of cable and pipe in any type of soil etc., complete all as specified and directed |
| 132 | Returing, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables, jointing & testing, complete all as specified and directed. |
| 133 | Removing excavated material to a distance n.exc 50 m & depositing where directedat a level n. exc 1.50 m above the starting point, complete as specified and directed. |
| 134 | Supply and erect in true vertical position 11.00m long steel tubular swaged poles complete with cast iron base plate, finial plug, bolts, nuts & screws as specified type 410 SP-55, painting of exposed surface of pole with two coats of aluminium paint over one coat of red oxide primer, painting up to 1.20m height above coping in alternate band ( 20 cm wide strip) with two coat synthetic enamel paint over one coat red oxide primer, marking Pole No. in 10cm dia coloured yellow circle, painting of pole below ground level with two coat anticorrosive paint, complete all as specified and directed. (Note:- Excavation, earth work and PCC will be measured and paid separately in respective items.) |
| 135 | M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 136 | M&L for plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in coping for pole and the like, weathering, slightly rounded or chamfered angles including necessary form work, complete all as specified and directed. |
| 137 | S&F air termination single pointed copper rod 12mm dia and 300mm long lightening arrestor, screwed for easy fitment and fixing with base plate with 10mm holes on four corners for necessary fixing arrangement on top of PCC block (15cmx15cmx20cm), complete all as specified and directed. |
| 138 | S&F 32 x 6mm copper strip earth continuity strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and directed. |
| 139 | S&F test point terminal block made out of Gun metal or phosphorous bronze of size 75 mmx75 mm x25 mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screws, complete all as specified and directed. |
| 140 | S&F 50mm dia GI tubing, light grade, with all fittings fixed on walls / poles, laid in trenches for protection of cable, complete all as specified and directed. |
| 141 | M&L for copper earthing complete with 600mm × 600mm × 3.15mm thick electrode, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to 20×3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No. 3 connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit , internal surface of concrete shall be given 10mm thick plaster in CM 1:4 and 40 mm thick precast RCC cover 1 : 2 : 4 ,type B-1( using 20 mm graded crushed stone aggregare ) reinforced with8 mm dia TMT bars @ 75 mm c/c both ways with 12mm dia round bar as in handle, completeall as specified and directed. NOTE: (i) The cost of earth lead and its protection pipe upto and including 7.5 m only from the top of earth electrode are deemed to be included under this item and additional earth lead , if any, required at site shall bemeasured and paid for separately under appropriate item of Schedule `A’/BOQ.(ii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted. |
| 142 | Deduction to be made from BOQ for Schedule \"A\" Part-III (Credit Schedule from dismantling / taking down items) worth Rs 42,775.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) |
