Tender For Special Repair To Building No Np 3 At E Zone And Building No Dd 119 (01) To 119 (08) At F Zone Under Age Br I Of Ge (West) Ferozepur Cantt, Ferozpur-Punjab

TDR : 52998951

Tender Notice
BOQ

14 Days Left

Ferozpur , Punjab

Tender Brief : Tender For Special Repair To Building No Np 3 At E Zone And Building No Dd 119 (01) To 119 (08) At F Zone Under Age Br I Of Ge (West) Ferozepur Cantt

Document Fees
₹ 500 /-

EMD
₹ 86500.0 /-

Tender Value
₹ 43.20 Lakhs /-

Submission Date
06-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling of brick tiles in roofsingle layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified and directed.
2	Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.Note:-Demolition of mud phuska to be cut in average thickness from top surface of roof for create the slope as directed by Engineer-in-Charge.
3	Removing mud phuska/soil material exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed.
4	M&L Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.
5	All as per Srl item No 4 here-in-above but except bricks tiles complete all as specified and as directed.Note :- Old retrieved serviceable bricks tiles shall be reused after proper cleaning. The cost of cleaning shall be deemed to be included in the quoted rate.
6	M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed.Note: WPC shall be measured and paid for separately.
7	M&L 80mm thick average consolidated thicknessmud phuska on flat roof including 25mm thick mud plaster complete all as specified and directed.
8	M&L 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed.Note: WPC shall be measured and paid for separately.
9	Supply only water proofing compound.
10	M&L Cover fillet in Plain Cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) min radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary slopingon roofincluding form work complete all as specified and directed.
11	M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
12	M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gm/sqm) and on primed surface by forced application complete all as specified and directed.
13	M&L two coats of solar reflective bituminous aluminium paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed.
14	M&Lprepration of roof surface and applying two coats of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and directed.
15	Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed.
16	M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid for separately.
17	M&L water proofing treatment to sunken floors of Kitchen, toilets, laboratories, bath and WC\"s etc shall be as under :- (i)Application of two components of acrylic modified cementitious coating(aa)Clean the RCC Surface with wire brush and chisel out and mortar sticking to Surface(ab)Apply FOSROC NITOPROOF 600 PF (min 0.8mm dft) over a priming coat of NITOPROOF WB Primer or equivalent of ASIAN PAINT/ SIKA/ BERGER/ PIDILITE DR FIXIT(ac) Provide HDPE 1.0mm thick Sheet before laying of any floor finishes.
18	M&L PCC 1:5:10, type E-2 (using 40 mm graded stone aggregate ) as in filling under sunken portion complete all as specified and directed.
19	M&L 25 mm thick PCC 1:2:4 , type B1 (using 20 mm graded stone aggrigate) as in floor finished even and rough to receive top layer complete all as specified and directed.
20	Demolition of reinforced cement cocrete in any position complete all as specified and directed.
21	Use & waste of formwork tosoffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
22	M&L RCC 1:1.5:3, type B1 (using 20mm graded stone aggregate )as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
23	M<MT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.
24	Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.
25	Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.
26	S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
27	All as per Srl itemNo 26 here-in-before but size 105mmx60mm with single rebate.
28	All as per Srl itemNo 26 here-in-before but size 75mmx50mm with single rebate.
29	S&F 35mm thick second class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified and directed.
30	S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framingplain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.
31	M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.
32	S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.
33	S&F Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.
34	S&F 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed.
35	S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
36	S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
37	S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
38	S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
39	S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
40	S&F Mild steel, fixed type ventilaterswith glazing bars complete with sash bars, dovetailed or welded complete all as specified and directed.
41	S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed.
42	S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil puttyand glazing clips fixed complete to wooden/Steel window not exceeding 0.5 sqm in each pane complete all as specified and directed.
43	S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.
44	S&F Galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples as in repair complete all as specified and directed.
45	S&F Solid PVC door frame of size 50mm x47 mm made out of 5 mm plain colour PVC sheetreinforced with MS square tube supplying and fixing as per specification complete all as specified and directed.
46	S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck insidesolvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
47	S&F Aluminium Anodised handles 150 mm long fixed to doors/windows complete all as specified and directed.
48	S&F Aluminium Anodised tower bolts 200 mm long fixed to doors/windows all as specified and directed.
49	S&F 150 mm Extruded Aluminium alloy handlescomplete all as specified and directed.
50	S&FAluminium Anodised butt hinges, type C21, 125 mm long,fixed with galvanised mild steel hinge pin complete all as specified and directed.
51	Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.
52	S&F 18mm Solid PVC board plain colour,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmX18mmX500mm on three sides complete all as specified and directed.
53	S&F 25 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVCon three sides as in supporting block to shelves ncomplete all as specified and directed.Make : Rajshree, Echon or equivalent in approved makes.
54	S&F 20mm Solid PVC board plain colour,fixed with screws or adhesive with complete accessaries as in shutters complete all as specified and directed.
55	S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.
56	S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed.
57	S&F 2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed.
58	S&F 150mm long aluminium, anodisedbarrel tower bolts of extruded section, complete all as specified and directed.
59	S&F 125mm Extruded aluminium alloy handle complete all as specified and directed.
60	S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.
61	S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nosper RM and fixed withPVC rawl plugs & steel screws as inrepairs complete all as specified and directed.
62	S&F20mm dia mild steel PVCcolour powder coatedcurtain rod with fancy type brackets including with all fittings as fixed in repairs complete all as specified and directed.
63	Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc., but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.
64	Demoltion ofbrick work built in cement mortar of any specification and in any position complete all as specified and directed.
65	M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.
66	All as per Srl item No 65 here-in-above but except bricks complete all as specified and as directed.Note :- Old retrieved serviceable bricks shall be reused after proper cleaning. The cost of cleaning shall be deemed to be included in the quoted rate.
67	Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.
68	M&L external rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed.
69	M&L applying Silane Siloxane based water repellent coating FOSROC NITOCOTE SN 522 (or equivalent of SIKA/Berger/Asian Paints/Pidilite/Dr Fixit) by evenly spraying or brushing (coverage approx 7 Sqm per litre of NITOCOTE SN 522) to external walls from plinth protection to bottom of window cills level complete all as specifed and directed.(i)Clean the surfaces to remove loose particulars or any efflorescence on bricks.(ii)Application of Silane Siloxane based water repellent by spraying or brushing (coverage approx 7 Sqm per litre of NITOCOTE SN 522)
70	M&Linternal rendering10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
71	M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
72	M&L Preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.
73	M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
74	M&L Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.
75	M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed.
76	M&L Preparationof newly plastered surfaces of ceiling& applying three coats of white washcomplete all as specified and directed.
77	M&L Preparation of old treated plastered surfaces of walls after complete removal of existing treatment and applying two coats of cement base paintcomplete all as specified and directed.
78	M&L applying wall putty of 1mm thick interior/exterior on wall surfaces finished smooth and even complete all as specified and directed.
79	M&L washing, rubbing down and stopping of distempered and painted surfaces and apply one coat of oil bound distemper complete all as specified and directed.
80	M&L washing rubbing down and stopping of cement basedpainted surfaces and applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed.
81	M&L preparation of olddecorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.
82	M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.
83	M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
84	M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
85	M&L Preparation of old steel surfacesof any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paintall as specified and directed
86	M&L Preparation of old wood or wooden based surfacesof any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint on old painted surfaces all as specified and directed.
87	Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises complete all as specified and directed.
88	M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per sq. meter complete all as specified and directed.
89	M&L Non skidceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsset and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
90	M&L Non skidceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsset and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
91	M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
92	M&L glazed coloured designer ceramic tiles of 300mmX450mm &7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tilescomplete all as specified and directed.
93	M&L Machine cut kota stone slab flooring 18-20 mm thick over and incuding 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishingand rounded or chamfered for nosing complete all as specified and directed.
94	M&Lmachine cut kota stone slab flooring 18-20 mm thick over and including 15 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specifed and directed complete all as specified and directed.
95	M&L Kota stone slab 18-20 mm thick in skirting, etc over and including 15 mm thick cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed.
96	M&L Marble work 18 to 20 mm thick in steps ,jambs,pillars,cooking platform and like includingpointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and blacktypes over and including15 mm thickscreed bedding in cement mortar 1:6 complete all as specified and directed.
97	S&F Glazed coloured designer cereamic tiles in vertical surfaces size 450mmX 350mm & 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed
98	Demolition of unreinforced cement concrete in ground floor and pavings not exceedng 15 cm thick (below or above GL) complete all as specified and directed.
99	M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floors finishes complete all as specified and directed.
100	M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
101	M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
102	M&L 40 mm thick PCC 1:2:4, type B-1 (using 20 mm garded stone aggregate) for floor finish without using extra cementcomplete all as specified and directed.
103	Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed.
104	M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
105	S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors including fitting like elbow, reducer, tee, union, nipple etc incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
106	All as per Srl Item above 105 here-in-before but 20 mm bore tubing.
107	S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
108	S&F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
109	S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe andincluding 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.
110	S&F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed.
111	S&F Gun-metal, globe or gate valves 15mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
112	S&FGun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
113	S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and directed.
114	S&F 20mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc as fixedin repairs complete all as specified and directed.
115	S&F 600mm x 450mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified and directed.
116	S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and directed.
117	S&F in repair 15mm stop cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or brass ferrule fancy type chromium plated with long shank and cup (Concealed type) complete all as specified and directed.
118	S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.
119	S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified and directed.
120	S&F CP Soapdish Oval /squaretype as fixed in repairs andall as specified and directed.
121	S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) \"P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.
122	S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
123	S&F Wash hand basin, flat back 550mm x 400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
124	S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified and directed.
125	S&Fstainless steelplate rack 1.00 mm thick racks of standardqality 900mm x 750mm x 250mm sizein repair including necessary shelves etc complete as fixed repairs complete all as specified and directed.
126	Dismantling CI pipe alongwith fittings of 50/75/100mm dia,below or above ground level or laid in floors,jointed in cement mortar and taking out complete all as specified and directed.
127	Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
128	S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.
129	S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.
130	S&F 110 mm bore PVC (SWR) gully trap/floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.
131	S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.
132	S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.
133	S&F PVC(SWR) vent cowl,for 110mm bore pipe complete all as specified and directed.
134	Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation etc or for shafts wells cespits, manholes, pier holes etc not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and gettingout in soft/loose soil complete all as specified and directed.
135	Returning filling in layers including leveling watering and well ramming in layers not exceeding 25 cm thick compelte all as specified and directed.
136	Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
137	Removing excavated material as soil exceeding 50 m and not exceeding 250 m, depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.
138	M&L cement concrete 1:3:6, type C2 ( using 40 mm graded stone aggregate) as in concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested completed all as specified and directed.
139	S&F salt glazed stonewire drain pipe 150 mm internal diameter grade A laid in trenches jointed and tested complete all as specified and directed.
140	M&L Cutting into existing manholes for connecting new drains 150mm dia,making good to pipe & rendering,cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required complete all as specified and directed.
141	M&L Reinforced cement concrete (nominal mix 1:1.5:3) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in chelves complete all as specified and directed.
142	S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
143	M&L Forming jambs etc built in cement mortor1:6to openingsincl cutting toothingand properly bondinginto to old workalso facing ,jointoingand pointing to matchto existing work complete all as specified and directed.
144	S&F of 40mm thick flush door shutter of solid core construction with block board core with lipping 2nd class hardwood/beading both faces are covered with decorative laminated type-I of thickness 0.9mm. Colour and pattern shall be approved by Engineer-in-Charge complete all as specified and directed.
145	S&F in repair galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed.
146	Hacking out old broken glassfrom metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed.
147	S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.
148	S&F PTMTbutt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed.
149	S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
150	S&FAluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
151	S&F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified and directed.
152	Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
153	Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
154	S&FCPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia including taking up or down old tubingcomplete all as specified and directed.Makes : Finolex or equivalent in approved makes.
155	S&F CPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 25 mm dia including taking up or down old tubingcomplete all as specified and directed.Makes : Finolex or equivalent in approved makes.
156	S&F 20mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.
157	S&F 25mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.
158	S&F heavy duty Stainless Steel (AISI-304) Shower drain with Cockroach Trap (450mm x 75mm) including all fittings andfixed with white cement fixed complete all as specified and directed.
159	M&L Plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and directed.
160	M&L Reinforced Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6.Note: Reinforcement will be measured and paid for seperately.
161	M&L Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified & directed.
162	Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
163	S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
164	S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
165	S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
166	S&F 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.
167	S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
168	S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
169	S&F 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.
170	S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.
171	S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.
172	S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed.
173	S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
174	S&F 8 to 10 mm thickbevelled edge mirror of selected quality glass edges to be polished androunded , onfixed to wall withwooden plugs with chromium plated brass screws and cup washers as fixed in repairs complete all as specified and directed.
175	S&F Corner glass shelves 225mm radius, 6mm thick set of three pieces as per sample radious for bath room, fixed on suitable support all as directed.
176	S&F in repair sheet glassshelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
177	S&F hot and cold wall mixer With Over head shower type arrangement including bend pipe for over head shower with connecting legs and wall flanges as fixed in repairscomplete all as specified and directed.
178	Demolition of un-reinforced cement concrete in any position complete all as specified and directed.
179	M&L 75mm thickcement concrete 1:3:6, type B-1 (using 20mm graded stone aggregate as insub base etc , surfaces finished even and smooth without using extra cement complete all as specified and directed.
180	Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
181	M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copperconductor, multi stranded of size 1.5 sqmm, single core,in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Pointcontrolled by one single pole one way switch.
182	(b) One socket outlet on the sameboard controlled by one single pole one way switch
183	(c) One 5 amps socket outlet independentcontrolled by one single pole 5 Amp switch.
184	Allas per ItemNo 181 here-in- before but one three pin 15 Amps switch socket out let on the independentboardwith 2.5 Sq mmPVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
185	S&F Switch piano flushtype single pole one way5/6 Amp complete all as specified and directed.
186	S&FSwitch piano flush type 15 amps, single pole one way duly ISI marked complete all as specified and directed.
187	S&F Socket outlet 2 in one , 5/6 Amps flush typeISI marked complete all as specified and directed.
188	S&FSocket outlet, 2 in one6pin 5 and 15 Ampspiano flush type ISI marked complete all as specified and directed.
189	S&F ceiling rose, PVC/Polycarbonate,isolated three terminals complete all as specified and directed.
190	S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and directed.
191	S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
192	S&F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.
193	S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
194	S&F LED tube light fitting 1 X 18 Wdecorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient230V,complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Makes:- Cat Part No LHEXBLP7UN1W018 of make \"Havells\" or techno-commercially equivalent in approved makes.
195	Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
196	S&Fsheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar andDin rail,8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
197	Supply & Fixingsheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
198	S&FMCCB 63 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and directed.
199	S&FMCCB 100 Amps, 415 volts, 16 KA, 4 Polecomplete all as specified and directed.
200	S&F 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
201	S&F 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
202	S&FMCB, Single Pole and neutral 240 V, 32 Amps 10 KA \"B\" series complete all as specified and directed.
203	S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.
204	M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed.Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run.
205	S&F in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm diaall as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.
206	Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 Core complete all specified and directed.
207	M&L sand filling under floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed.
208	M&L Bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of underground cable complete all as specified and directed.
209	S&F Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etccomplete all as specified and directed.
210	M&L Earthing complete with galvanized steel plate elecrode of size60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate,excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.
211	S&F bell push flush type 5 Amps duly ISI marked complete all as specified and directed.
212	S&F bell ding dong type AC 230 Volt single pole complete all as specified and directed.
213	S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
214	S&F SPN 32 AMP amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
215	Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Building No Np 3 At E Zone And Building No Dd 119 (01) To 119 (08) At F Zone Under Age Br I Of Ge (West) Ferozepur Cantt, Ferozpur-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Building No Np 3 At E Zone And Building No Dd 119 (01) To 119 (08) At F Zone Under Age Br I Of Ge (West) Ferozepur Cantt, Ferozpur-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us