Tender For Repair And Improvement Works To The Type V Quarters (2 Nos) In Voc Port, Tuticorin-Tamil Nadu

TDR : 52998184

Tender Notice
BOQ

4 Days Left

Tuticorin , Tamil Nadu

Tender Brief : Tender For Repair And Improvement Works To The Type V Quarters (2 Nos) In Voc Port

Document Fees
Refer document

EMD
₹ 50761.0 /-

Tender Value
Refer document

Submission Date
24-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Attending the repairs works in the existing door, window and ventilator with frame andshutters of various size at Residential Quarters using the available wooden planks / scantlings which will beissued by the department and same may be re-fixed at the original position.The cost inclusive of removing andre-fixing the existing door/window/ventilator with required fixtures, labour, tools & plants etc., complete and as directed by the departmental officers.
2	Dismantling and removal of Reinforced Cement Concrete (RCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
3	Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers.
4	Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers.
5	Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers.
6	Supplying and fixing in position of Wooden panelled door single shutter including cost ofhold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers.
7	Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers.
8	Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand(P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.
9	Providing and laying approved colour and quality of Double Charged Vitrified Tiles 800 x 800 x 10mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
10	Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 12 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
11	Providing and laying approved colour and quality of Double Charged Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
12	Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.
13	Supplying and fixing 20mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
14	Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
15	Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.
16	Supplying and laying in trenches 50 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.
17	Supplying and fixing in position 15mm dia. Heavy type Brass Chromium Plated Pillar tap of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
18	Supplying and fixing 15 x 200 mm Grohe rain shower in the bath & toilet room at HOD rooms, the cost including 15 x 200 mm Grohe rain shower, 15mm Grohe sin. Lev. Con. Divertor, 15mm Grohe plain spout, 15x450mm shower arm, 2 in 1 tape, jacquare tape, conveyance charges and fixing charges ect., complete and as directed by departmental officers.
19	Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
20	Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
21	Supplying and fixing of Stainless Steel sink using 304L Grade of size 600mm x 450mm x 200mm. with necessary fittings. The rate inclusive of Stainless Steel Sink, fabrication charges, conveyance charges, fixing charges, labour, necessary fittings Such as1 No. of 32mm dia. Waste Water pipe, 32mm dia. C.P. Waste Coupling etc., complete and as directed by the departmental officers.
22	Supplying and fixing in position of Floor mounted coupled European type Water Closet of size 370 x 645 x 810mm manufactured by JAQUAR, KOHLER, TOTO, etc., including all fittings, floor mounted coupled European type water closet, Angular stop Cock, Long Braided hose and other specials etc., including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
23	Supplying and fixing in position Stainless Steel Health Faucet first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
24	Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers.
25	Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valveand fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers.
26	Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 20mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
27	Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
28	Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers.
29	Supplying and fixing of CP Wall Mixture Tap 3 in 1 system with Hand Shower made of Jaquar, Kohler, ToTo of first quality with necessary fixtures.The cost inclusive of all materials, labour, fixing charges, fixtures etc., complete and as directed by the departmental officers.
30	Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade.Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
31	Applying Two coats ofSynthetic Enamel paint (excluding priming coat) on New wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic EnamelPaint and labour charges etc., complete complying with AISS and as directed by the departmental officers.
32	Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer).
33	Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
34	Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.
35	Supplying and fixing in position wooden Ventilator of various size in all floor with hard kongu wood frames as per drawing including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, pin head 3mm thick pressed glass, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers.
36	Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers.
37	Providing and fixing SS Powder coating Mosquito Mesh shutter of various size with 1\" x 1\" anodized aluminium section frame etc.,The rate including cost of SS Heavy duty mesh, 1\" x 1\" anodized aluminium section frame, hinges, tower bolt, window lock and necessary furniture fittings, labour charges etc., complete and as directed by the departmental officers.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Improvement Works To The Type V Quarters (2 Nos) In Voc Port, Tuticorin-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Attending the repairs works in the existing door, window and ventilator with frame andshutters of various size at Residential Quarters using the available wooden planks / scantlings which will beissued by the department and same may be re-fixed at the original position.The cost inclusive of removing andre-fixing the existing door/window/ventilator with required fixtures, labour, tools & plants etc., complete and as directed by the departmental officers.
2	Dismantling and removal of Reinforced Cement Concrete (RCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
3	Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers.
4	Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers.
5	Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers.
6	Supplying and fixing in position of Wooden panelled door single shutter including cost ofhold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers.
7	Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers.
8	Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand(P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.
9	Providing and laying approved colour and quality of Double Charged Vitrified Tiles 800 x 800 x 10mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
10	Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 12 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
11	Providing and laying approved colour and quality of Double Charged Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick.The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISSand as directed by the departmental officers.
12	Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.
13	Supplying and fixing 20mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
14	Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
15	Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.
16	Supplying and laying in trenches 50 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.
17	Supplying and fixing in position 15mm dia. Heavy type Brass Chromium Plated Pillar tap of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
18	Supplying and fixing 15 x 200 mm Grohe rain shower in the bath & toilet room at HOD rooms, the cost including 15 x 200 mm Grohe rain shower, 15mm Grohe sin. Lev. Con. Divertor, 15mm Grohe plain spout, 15x450mm shower arm, 2 in 1 tape, jacquare tape, conveyance charges and fixing charges ect., complete and as directed by departmental officers.
19	Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
20	Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
21	Supplying and fixing of Stainless Steel sink using 304L Grade of size 600mm x 450mm x 200mm. with necessary fittings. The rate inclusive of Stainless Steel Sink, fabrication charges, conveyance charges, fixing charges, labour, necessary fittings Such as1 No. of 32mm dia. Waste Water pipe, 32mm dia. C.P. Waste Coupling etc., complete and as directed by the departmental officers.
22	Supplying and fixing in position of Floor mounted coupled European type Water Closet of size 370 x 645 x 810mm manufactured by JAQUAR, KOHLER, TOTO, etc., including all fittings, floor mounted coupled European type water closet, Angular stop Cock, Long Braided hose and other specials etc., including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
23	Supplying and fixing in position Stainless Steel Health Faucet first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
24	Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers.
25	Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valveand fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers.
26	Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 20mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
27	Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
28	Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers.
29	Supplying and fixing of CP Wall Mixture Tap 3 in 1 system with Hand Shower made of Jaquar, Kohler, ToTo of first quality with necessary fixtures.The cost inclusive of all materials, labour, fixing charges, fixtures etc., complete and as directed by the departmental officers.
30	Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade.Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
31	Applying Two coats ofSynthetic Enamel paint (excluding priming coat) on New wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic EnamelPaint and labour charges etc., complete complying with AISS and as directed by the departmental officers.
32	Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer).
33	Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
34	Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.
35	Supplying and fixing in position wooden Ventilator of various size in all floor with hard kongu wood frames as per drawing including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, pin head 3mm thick pressed glass, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers.
36	Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers.
37	Providing and fixing SS Powder coating Mosquito Mesh shutter of various size with 1\" x 1\" anodized aluminium section frame etc.,The rate including cost of SS Heavy duty mesh, 1\" x 1\" anodized aluminium section frame, hinges, tower bolt, window lock and necessary furniture fittings, labour charges etc., complete and as directed by the departmental officers.

Tender For Repair And Improvement Works To The Type V Quarters (2 Nos) In Voc Port, Tuticorin-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us