|
| 1 | AWC- Guda Devran Block-DesuriDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 2 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 3 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 4 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 5 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 6 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm : |
| 7 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 8 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 9 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 10 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 11 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 12 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 13 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 15 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 16 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 17 | Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters. |
| 18 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer. |
| 19 | AWC- Kot Solankiyan Block- Desuri Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 20 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 21 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 22 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 23 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 24 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm : |
| 25 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 26 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 27 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 28 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 29 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 30 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 31 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 32 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 33 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 34 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 35 | Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters. |
| 36 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer. Please Enable Macros to View BoQ information |
