|
| 1 | AWC- Shivtalav-1 Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 2 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 3 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 4 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 5 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 6 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 7 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Add extra for Square or Rectangular Pillars in Superstructrebrick work up to five storeyUpto 45 cm length and two corners are free |
| 8 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 9 | Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete. |
| 10 | P & F Kitchen & Lab. Sink of approved make with C.I.brackets duly painted, 40 mm C.P. waste coupling, C.P. Brasschain with rubber plug, 40 mm G.I. waste pipe up-to floorlevel complete including cutting and making good the wall &floor :1.38.1 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600x 450 x 250mm. |
| 11 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 12 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 13 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 15 | Cement plaster in skirting and/dado 18 mm thick with cementmortar 1:3 (1 cement : 3 course sand) finished with a floatingcoat of neat cement including rounding of junctions with floor |
| 16 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 17 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 18 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 19 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 20 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). |
| 21 | Providing and fixing horizontal chajja of Red/ White sandstone 40 mm thick and upto 80 cm projection in cement mortar1:4 (1 cement : 4 coarse sand) including pointing in whitecement mortar 1:2 (1 white cement : 2 stone dust) with anadmixture of pigment matching the stone shade. |
| 22 | Providing dab stone over Chajjas duly fixed in cement sandmortar 1:6 complete :6.16.1 80mm thick. |
| 23 | AWC- Shivtalav-2 Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 24 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 25 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 26 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 27 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 28 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm : |
| 29 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 30 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Add extra for Square or Rectangular Pillars in Superstructrebrick work up to five storeyUpto 45 cm length and two corners are free |
| 31 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 32 | Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete. |
| 33 | P & F Kitchen & Lab. Sink of approved make with C.I.brackets duly painted, 40 mm C.P. waste coupling, C.P. Brasschain with rubber plug, 40 mm G.I. waste pipe up-to floorlevel complete including cutting and making good the wall &floor :1.38.1 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600x 450 x 250mm. |
| 34 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 35 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 36 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 37 | Cement plaster in skirting and/dado 18 mm thick with cementmortar 1:3 (1 cement : 3 course sand) finished with a floatingcoat of neat cement including rounding of junctions with floor |
| 38 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 39 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 40 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 41 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 42 | Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters. |
| 43 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer. |
| 44 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). |
| 45 | Construction of Soakage well in all types of soil of approveddrawing, top 90 Cm .Portion in 450mm thick masonry withCM 1:6, 80 mm thick stone slab covering, jointing of slabin CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.Cflooring, earth work etc . complete including disposal ofsurplus earth within a lead of 50 mtr . 3.24.1 Inner dia 90 Cm & 10 to 12 Mtr deep |
| 46 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish :12.2.1 25 mm thick. Water tank |
| 47 | AWC- Mundara-1 Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 48 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 49 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 50 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 51 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 52 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm : |
| 53 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 54 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Add extra for Square or Rectangular Pillars in Superstructrebrick work up to five storeyUpto 45 cm length and two corners are free |
| 55 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 56 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 57 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 58 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 59 | Cement plaster in skirting and/dado 18 mm thick with cementmortar 1:3 (1 cement : 3 course sand) finished with a floatingcoat of neat cement including rounding of junctions with floor |
| 60 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 61 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 62 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 63 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 64 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 65 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). |
| 66 | Construction of Soakage well in all types of soil of approveddrawing, top 90 Cm .Portion in 450mm thick masonry withCM 1:6, 80 mm thick stone slab covering, jointing of slabin CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.Cflooring, earth work etc . complete including disposal ofsurplus earth within a lead of 50 mtr . 3.24.1 Inner dia 90 Cm & 10 to 12 Mtr deep |
| 67 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 68 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for pavingspecification) and IRC : SP:63-2004 (guidelines for the use ofinterlocking concrete block pavement) M-30, 60 mm thick to be used in non traffic areas like buildingpremises, monument premises, land scapes, public gardens/park, domestic drives, paths and patios, Embankment slopes,Category „C‟not denated on any it‟s faces like Hexagon,Rectangular, square shape as per IRC SP 63:2004 |
| 69 | AWC- Mundara-2 Block-BaliPART A CIVIL WORKDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 70 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 71 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 72 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 73 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate |
| 74 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm : |
| 75 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 76 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 77 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 78 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. |
| 79 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal) |
| 80 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00 |
| 81 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 82 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 83 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work. |
| 84 | PART B Electric WORKWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Short point (up to 3 mtr.) |
| 85 | Medium point (up to 6 mtr) |
| 86 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 1 x 1.5 sq.mm |
| 87 | 2 x 1.5 sq.mm |
| 88 | AWC- Mundara-3 Block-BaliPART A CIVIL WORKDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 89 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead |
| 90 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 91 | Dismantling stone slab roofing over wooden karries andbattens (dismantling karries and battens to be paid forseparately) including stacking of serviceable material anddisposal of unserviceable material within 50 meter lead: |
| 92 | Random rubble dry stone Kharanja under floor. |
| 93 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size). |
| 94 | Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C |
| 95 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : 6.17.1 Sand or other approved stone 25mm thick |
| 96 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge Add extra for subsequent story |
| 97 | Providing and laying brick kharanja on roofs with cementmortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integralwater proofing compound in square pattern 75mm to 100mm thick average |
| 98 | Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 99 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 100 | Pointing on stone slab ceiling with cement mortar 1:2 (1cement : 2 fine sand): Flush/ Ruled pointing |
| 101 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant |
| 102 | Providing & laying broken glazed titles on roof ( brokenglazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30Kg/Sqm. Of VG-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with waterproofing compund all complete as per direction of Engineerin-charge. |
| 103 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 104 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 105 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in :Cement Mortar 1:6 (1-Cement:6-Sand). |
| 106 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish :12.3.1 25 mm thick |
| 107 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik |
| 108 | Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 109 | Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm |
| 110 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: |
| 111 | Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only |
| 112 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. |
| 113 | upplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. |
| 114 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Add extra for Square or Rectangular Pillars in Superstructrebrick work up to five storeyUpto 45 cm length and two co |
| 115 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes inCement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 116 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work.andmanufacture to give an even shade |
| 117 | Part-B Electric WorkWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Short point (up to 3 mtr.) |
| 118 | Medium point (up to 6 mtr) |
| 119 | Long point (up to 10 mtr) |
| 120 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR On board |
| 121 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 1 x 1.5 sq.mm |
| 122 | 2 x 1.5 sq.mm |
| 123 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating |
| 124 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 125 | Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 126 | Providing & Fixing of ISI marked (IS:371) 6 amp surface type 3 pin ceiling rose with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . Please Enable Macros to View BoQ information |
