|
| 1 | Earth work in by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead (earth)and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Providing and laying hand packed stone soiling in foundation, under floors etc incl, ramming wtering and consolidating complete, cost of carriages of all materials involved upto site of work |
| 3 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work at all levels in : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 4 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. incl all carriage complete job All works Upto Plinth |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Providing and laying in position cement concrete in M-15 grade concrete excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 7 | Providing form worki ncluding Centering,shuttering,strutting,proppingetc.usingplywoodsheeting with water proofing plyboard (12 mm min.thickness) and removal of the same for( All work at all levels complete.) |
| 8 | Providing and laying in position full body vitrified tiles of size 400mm x 400mm x12mm conforming to ISI15622 laid on 1:4 mix i/c pointing of joints with white cement and matching pigment, all complete as per directions of incharge laid over 20mm thick (1:4) mix Mortor |
| 9 | providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, stair cases of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (18mm Thick) |
| 10 | Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding |
| 11 | Providing and fixing stainless steel (Grade 304) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job |
| 12 | Providing and fixing Blue UV Coated Polycarbonate Roofing Sheet of approved brand, having a thickness ranging from 1415 mm, with UV protective coating of 50 microns on the exposed surface, manufactured from high-quality polycarbonate material ensuring excellent impact resistance, high light transmission, and long-term weather durability. The sheet shall be blue in color, UV coated for superior protection against ultraviolet rays, and suitable for residential and commercial roofing applications. The installation shall include proper fixing with self-drilling fasteners, neoprene washers, overlaps as per manufacturer’s recommendations, and all necessary accessories to ensure a leak-proof, aesthetically pleasing, and durable roofing system complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Providing and fixing a Double-Sided LED Menu Board Display with Magnetic Slim Light Box for advertising, complete with all fixings and accessories, made of slim-profile aluminium frame with magnetic front cover or snap-open system for easy poster replacement, having LED back-lit or edge-lit illumination using high-efficiency SMD2835 LED strips with a lifespan of over 80,000 hours, ensuring uniform brightness and low power consumption. The board shall display graphics on both faces for 360° visibility, suitable for vertical wall-mounting, hanging, or table-top installation in indoor commercial environments such as restaurants, cafés, and retail spaces. The assembly shall include mains adaptor/DC driver, wiring, wall mount brackets or suspension kit, power cable, plugs, anchors, and bolts, ensuring complete installation and stable operation. The graphics panel shall be compatible with printed posters or films that slide or snap into the magnetic frame, protected by a clear acrylic or tempered glass cover. The finish shall be in aluminium (silver) or custom colour, with a slim design thickness of 20–30 mm (e.g., Model JL-D-A2 with 25 mm thickness) and available in A4, A3, A2 or custom sizes. The scope of work includes supply, installation, power connection, alignment, testing, and commissioning, with warranty and support as provided by the manufacturer or supplier, complete in all respects as directed by the Engineer-in-Charge. |
| 14 | Electric part |
| 15 | Wring for lighting points/Man pontsexhaust fan points/call bell points with 2x1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC condet with 240V GA modular switch modular plate, suitable Gi box and earthing the point with 15 sq mm FRLS PVC Insulated copper conductor single core cable, etc as required (Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make) Including the cost of conduit Group B |
| 16 | Supply, Installation, Testing and Commissioning of 15-18W warm LED 4feet balten light outdoor type, minimum system efficacy 120lm/v, average life 50000 hours, Operating temperature -10°C to 45°C.Certification:-LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/Crompton/Jaguar/Wipro) |
| 17 | Supply, Installation, Testing and Commissioning of 50W warm (Havells! Phillips/Wipro skyline) new generation energy saving and environmental friendly long life LED Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w,CRI>80,CCT>5000,Avg Life 50000 hours, No haremful UV and IR radiators, Operating Temp -10 to 45C,Surge Voltage Protection, IP66 Protection and impact resistance of IK07 The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. |
| 18 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required. (Anchor roma plus/Legrand Mylinc /Crabtree or athena make) |
| 19 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, Including providing and fixing 02 no.3 pin 5/6 A modular socket outlet and 02 no.5/6 A modular switch connections elc. as required. (Anchor roma plus/Legrand Mylinc/ Crabtree or athena make) |
| 20 | Wiring for light/power plug points (15/16A healing points) with 2x4 sq mm FRLS PVC Insulated flexible stranded copper conductor wires in recessed or surface medium class PVC condult along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing, elc. as required.(Havells/ Polycab/ Anchor/ SSK/KEURR or equivalent make) Including the cost of conduit |
| 21 | Wiring for 5-10A socket out lets for computer with 2X2.5 sq. min FRLS PVC Insulated copper conductor (Havells/Polycab/ Anchor/ SSK/KEI/RR or equivalent make) as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing etc, as required including the cost of condult |
| 22 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 1.6mm thick M.S. sheet,, vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete., with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBS, sets of Aluminium Bus Bar of different rating after taking Derating factor into account, and other allied accessones etc as required the panel to be fabricated from reputed firm duly approved by CPRI as per approved design, size may vary as per sito requirement) |
| 23 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable Including earthing etc. as required |
| 24 | INCOMING: |
| 25 | a)125 amp DP MCB (Legrand/ Shinider/L&T/ABB make) |
| 26 | b)200A SP&N AL Busbar |
| 27 | Digital metering unit, panel indicators, etc |
| 28 | OUTGOING |
| 29 | 5-32 SPMCB |
| 30 | Supply, laying, connecting and commissioning of 16 sq mm 2 core XLPE/PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for pathway poles, incl, cost of required al. thimbles duly crimped. (Over head/ under ground) |
| 31 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) Including excavation and refilling the trench but excluding sand cushioning and protective covering etc.. complete as required |
| 32 | Providing, supplying, installing, testing commissioning of Advertising Moving Board (Scroll Type) of size 6 ft 3 ft (18 ft³) each, complete in all respects. The work includes fabrication and supply of MS frame duly painted, scroll mechanism with motor and rollers, display surface, electrical wiring and control system, civil and foundation/anchoring, fixing, painting and all accessories as required for proper operation. The item rate shall be inclusive of all labour, material, equipment, transportation, taxes and incidental charges for complete execution at site. Complete Job. |
| 33 | Supply, Installation, testing and commissioning of relay type voltage stabilizer AC operating from Input voltage 90-260 volts thereby producing output voltage of 230 volts +3% (5KVA) LIV GUARD/V-GUARD/SERVOCON |
| 34 | Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long Gl earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2\" dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound Please Enable Macros to View BoQ information |
