|
| 1 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiringon stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. |
| 2 | All as per Item No.1 abovebut one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site. |
| 3 | All as per Item No.1 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site. |
| 4 | All as per Item No.1 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 4 sqmmPVC (FRLS) insulatedunsheathed copper conductor single core multi stand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed at site. |
| 5 | S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site. |
| 6 | S&F Modular switch, single pole, one way, 6Amps one module complete all as specified and as directed. |
| 7 | S&F Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed. |
| 8 | S&F Modular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 9 | S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 10 | S&F Modular stepped type electronic fan regulator 220 volts, 100Wattcomplete all as specified and as directed. |
| 11 | S&F 9 W LED bulb of base B22d with color temp 6500K all as specified and directed. |
| 12 | S&F Sheet metal enclosure MCB distribution board including 200 Ampsbus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site. |
| 13 | S&F 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 14 | S&F 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. . |
| 15 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site. |
| 16 | S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed. |
| 17 | Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection and 130 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Havells Cat No. ENDURALINEARNEOBS22WLED865SPCSS or approved equivalent model in Wipro / Philips. |
| 18 | Supply and fixLED lights fitting 1x 10W, 220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection and 130 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Havells Cat No. ENDURALINEARNEOBS10WLED865SPCSS or approved equivalent model in Wipro / Philips. |
| 19 | S&F Floretine Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. complete all as specified and directed at site. Make : Havells Cat No. LHFOAJE1TZ1I060 or approved equivalent model in Wipro / Philips. |
| 20 | S&F 18W surface mounted LED round downlighter with premium diffuser to ensure glare free & even light distribution including necessary connection all as specified and directed at site. Havells Cat No. EDGERDDLSUR18WLED840SG2 or approved equivalent model in Wipro / Philips |
| 21 | S&F in repair 15W LED Post Top gate light, IP 65 suitable for pole dia 50mm complete all as specified and directed at site.Make : Havells Cat No. RUBYMINIPT15WLED830PSYMTOPC or approved equivalent model in Wipro / Philips |
| 22 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed at site. |
| 23 | S&F wall fan 240V, 400mm sweep with all fixing arrangement complete all as specified and directed. |
| 24 | S&F ceiling fans complete with blades, down rods, electronic regulator aongwith suitable fan hook and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 25 | Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out in hard/dense soil, complete all as specifed and directed |
| 26 | M & L for PCC type D2 1:4:8 (40mm gradedstone aggregate) in foundations, filling and mass Concrete, complete all as specifed and directed |
| 27 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specifed and directed |
| 28 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting pointin soils, complete all as specifed and directed |
| 29 | M & L for 100 mm thick Cement concrete type B 1, 1:2:4 (using 20 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing the surface even and smooth, complete all as specifed and directed |
| 30 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specifed and directed |
| 31 | M&L hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stone or boulders.complete all as specifed and directed |
| 32 | M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stoneaggregate) as in sub base of floor.complete all as specifed and directed |
| 33 | M & L for 75 mm thick Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even aned smooth without using extra cement complete all as specifed and directed |
| 34 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.Note: Rate quoted deemed to include cost of making good disturbed masonry surface to match with existing etc using PCC 1:2:4/brick work/cement mortar 1:4 complete all as specified and directed. |
| 35 | M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. |
| 37 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specifed and directed |
| 38 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 all as specified. |
| 39 | M&LVitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointedwith coloured cement matching with surfaces of tiles as in floor 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed complete all as specified and directed |
| 40 | All as per Sl item No.39above but for vertical surfaces such as skirting, dados and riser to steps over 10mm thick backing coat in cementplaster 1:3 finished even and fair to receive tiles, complete all as specifed and directed |
| 41 | M&L20mm thick Granite (of any type) work (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking plat- forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite and incl chamfeirng/rounding the edges over 15mm thick cement screed in CM 1:4 complete all as spd and as directed (Colour and design approved by Engr in charge). |
| 42 | M&L forColoured printedGlazed ceramic tiles on vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10mm plaster in CM 1:3 complete all as specified and as directed (colour & design approved byEngr -in-Charge). |
| 43 | M & L for 60mm thick machine pressed precast cement concrete tiles of interlocking pattern with grey cement and pigment rubber moulded with vibration technology set and jointed as per manufactures instructions laying over sand cushioning complete all as specified and as directed by Engr-in-charge. Note : (i) Rate quoted by contractor shall deemed to inclusive of filleting the side of pavement with PCC (1:2:4) type B1.(ii) Sand cushion should be measured & paid separetely. |
| 44 | M & L for sand filling under floors including watering and consolidation complete all as specified. |
| 45 | M & L plain cement concrete of type B1 1:2:4 (20 mm graded stone aggregate) as in string cources, lacing cources at the edges of interlocking tiles to fill the gaps to prevent dislodging of tiles including weathering, slightly rounded or chamfered angles and throating as directed. |
| 46 | S&F Anodised aluminium powder coated frame for doors and windows with one or more rebates incl joining cleat for fixing etc comlete all as specifed |
| 47 | S&F for anodised aluminium powder coated window and ventilators shutters side hung shutter without sash bar aluminium section weighing 0.55 kg/m incl necessary joining cleats glazing clips rubber packing anodised alu snap beading secrews alu anodised fittings such as peg stays 150mm long 91 No) hinges type B-21 100mm long (2 no) suitable handle comlete all as specifed and directed by engr-in-charge. |
| 48 | S&F for anodised aluminium powder coated (Thickness or powder coating not less than 50 micron) door shuttersaluminium section weighing 0.55 kg/m incl necessary joining cleats glazing clips rubber neoprene packing handle 02 nos in each door, hinges, anodised aluminium snap beading screws etc. comlete all as specifed and directed by engr-in-charge. |
| 49 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 50 | M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. |
| 51 | Supply only integral water proofing compound,, complete all as specified and directed. |
| 52 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed. |
| 54 | M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paintover a coat of alkali resistant primer complete all as specified and directed. |
| 55 | S&F curtain rod 25mm dia MS decorative type powder coated complete all as specified and directed. |
| 56 | S&F25 mm diaMS brackets to curtain pipe, decorative type powder coated complete all as specified. |
| 57 | Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG ( Glass Fiber reinforced Gypsum) false ceilingtiles of Size 595 x 595 mm of approved texture, degine and pattrens having moisture content less than 2%, humidity resistenceof 99% NRCO 50 to 75 as per IS 8225:1987, Noncombustable as per BS 476 (Part 4)-1970 and height refelectence of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 033 mm thick( galvanized)at the rate of 120 grames per sqm including both sides)compraing of maint runners of size 15 x 32 mm of lenth 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermeditate cross-T of 15 x 32 mm of length 600mm to from grid module of of length 600 x 600mm, suspended fromceiling using galvanized mild steel items ( glavanizing @ 80 grams per sqm) i.e 50 mm long, 8mm outer diameter M-6 dash fasterners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2mm Galvanized iron perimeter wall angle of size 24x24x0.40mm og length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 45 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawinig and as per directions of the Engineer-in charge. |
| 58 | S&F framless glazed facede as per IS 875 Part3 requirement suspended from the top of the opening incorporating thouhened glass panels not less than12 mm plain/ frosterdtoughned glass( to cover the totalclear openingall as specified and as per manufecturers instructionsas per approved drawings, used to each verticle joint to provide lateral stiffness against wind loading. deflection and other specified loads expected including frame work whereever necessary and hardwere all other accessories in the glazing with all extrusions, fittings,suspension brackets, locking arrangement,Floor spring, handle made of CP material length Exc 300mm and n.exc 400mm, 15-20 mm dia 2Nos in each leaf, spider etc AUSTAVISION / SADEV / STANLEY make with fittings of DORMA /AUSTAVISION / SADEV / STANLEY make with 4, 2 points spiders & stainless steel bolts as per design.All as specifed and as directed. |
| 59 | S&F framless glazed facede as per IS 875 Part3 requirement suspended from the top of the opening incorporating thouhened glass panels not less than12 mm plain/ frosted toughned glass( to cover the totalclear openingall as specified and as per manufecturers instructionsas per approved drawings, used to each verticle joint to provide lateral stiffness against wind loading. deflection and other specified loads expected including frame work whereever necessary and hardwere all other accessories in the glazing with all extrusions, fittings,suspension brackets, locking arrangement etc AUSTAVISION / SADEV / STANLEY make with fittings of DORMA /AUSTAVISION / SADEV / STANLEY make with 4, 2 points spiders & stainless steel bolts as per design.All as specifed and as directed. |
