|
| 1 | Taking down of chowkhats or frame with shutters n.exe. 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed. |
| 2 | Taking down of chowkhats or frame with shutters exe. 1.5 Sqm but nexc. 4 Sqm each without taking of shutter from the frame complete all as specified and directed. |
| 3 | Taking down shutter of any description exc 1.00 sqm but n exc 2.0 Sqm each complete all as specified and directed. |
| 4 | Taking down and refixing of shutter in same opening after resecuring or easing & adjusting of any description exc 1.00 sqm but n exc 2.0 Sqm each complete all as specified and directed. |
| 5 | S&F of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Handle, stay, 2nos of heavy duty stain less steel pivot hinges and 2 No\"s of Aluminium Powder Coated Tower Bolt shall be provided per shutter. Including of 4mm thick Plain float glass, S.S.304 Grade Wire Mesh, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges etc complete all as specified and directed. |
| 6 | S&F of Three shutter Sliding Windows(2-glass,1-mesh) made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, Outer Frame for Three Tracksis of 107 mm x 44 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with three integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made ofPVC,handle made of Aluminium 1 No. per each shutter and cut to length miter joined with corner brackets. including of 4mm thick Plain float glass, S.S.304 Grade Wire Mesh, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges etc complete all as specified and directed. |
| 7 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, Section for louvered ventilators should be of 33 x 56 mm Box section and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/ masonry wall by means of self expanding screws, 4mm thick Plain float glass, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges complete all as specified and directed. |
| 8 | S& F framed work as in door frame or gated of angle or other section with gusset plates, rails, braces etc., completed drilled for fixing of steel sheeting or covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing completed ( Fe 401-W (Gde-E-250) qualityA) fixed in repair complete all as spcified and directed. |
| 9 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 10 | S&F for 2nd class HW glazed and skelton shutters 30mm open rebated and prepared to receive glass, gauze etc (any number of sash bars) edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc sizes of member of shutter as spd in SSR Pt-1 , section 8, clause 8.20complete all as specified and directed. |
| 11 | S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms)complete all as specified & directed. |
| 12 | S&F factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre(wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 13 | S&F Aluminium, anodised barrel tower bolt of extruded section of 200 mm longcomplete all as specified and directed. |
| 14 | S&F Aluminium handles extruded type ,anodised of 150 mm sizecomplete all as specified and directed. |
| 15 | S&F 100 mm size butt hinges medium weight cold rolled stain less steelcomplete all as specified and directed. |
| 16 | S&F 300 mm size aluminium alloy,anodised,sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolt of extruded section opr cast aluminium alloy and fixed complete all as specified and directed. |
| 17 | M&L in repair Prelaminated particle board18/19mm thick interior grade prelaminated one side and decorative choice lamination & other side balancing white lamination fixed with screws to timber framework inclding wooden beading, lipping all around the pannel as in cup board shutter incl taking down complete all as specified and directed. |
| 18 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed . |
| 19 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality of both side plain white color rigid and glossy finish and fixed with screws solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/cupboard sides top and bottom shelves inside complete all as specified and directed . |
| 20 | S&F Continous piano hinges, mild steel, bright finish or electro galvanised of 40 mm size complete all as specified and directed. |
| 21 | S&F 100 mm Hasp and staple, stainless steel,or aluminium alloy wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 22 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and directed. |
| 23 | S& F sliding channel and necessary fittingand fixtures for drawers to be fixed withprelaminated partice board complete all as specified and directed. |
| 24 | Taking down plaster in any description of cement plaster incl racking out joints, scrubbing down with water complete all as specified and directed. |
| 25 | M&L for 10 mm thick rendering on fair faces of brick work, finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed. |
| 26 | M&L for 15 mm thick rendering on fair faces of brick work, finished even & smooth without using extra cement in CM 1:4 complete all as specified and directed. |
| 27 | M&L for 10 mm thick ceiling plaster including dubbing out average 10 mm thick in CM 1:4 and applyingthree coat white wash incl. preparation of new surface complete all as specified and directed. |
| 28 | M&L for two coat of cement base paint on new wall after preperation ofplastered surface complete all as specified and directed. |
| 29 | M&L for preparing newly plastered surfaces of walls and applying two coats with distemper oil emulsion after providing chalk whitening(preparatory to distempering) complete all as specified and directed. |
| 30 | M&L for painting with two coats of synthetic enamel paint over one coat of pink primer on new surface wood based surface exe. 10 cm width or girth complete all as specified and directed. |
| 31 | M&L for preparatiion of new steel surface and applying twocoat of of synthetic enamel paint on steelover one coat of red oxide zink primer 10cm width or girth complete all as specified and directed. |
| 32 | S&F in repair fancy type drapery rod 20 mm dia Stainless steel, chromium plated with fixing brackets,including sidebrackets, finials complete complete all as specified. |
| 33 | S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel / wooden / Z section windoow, ventilator & doors with necessary wooden beading / pin / nut bolt including necessary flat etc complete all as specified and directed. |
| 34 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel / wooden / Z section windoow, ventilator & doors with necessary wooden beading / pin / nut bolt including necessary flat etc complete all as specified and directed. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in square n exc 0.5 sqm each pane up to three storey height complete all as specified and directed. |
| 36 | S&F in repair 10 mm toghened glass as in hinge doors partions automatic doors and similar work including cutting to shape, drilling holes completed all as specified and as directed. |
| 37 | Repair of Aluminium door / window rearange / replacement of damaged rubber beading and tightteningetc. and refixing the same opening , area of each door / window exc. 1.0 Sqm but n.exc. 2.0 Sqm each incl necessary required fittings and fixture complete all as specified and directed. |
| 38 | M&L for powder coated anodised aluminium sliding windowany Size in three track of size 63.50 x 38.5 x 1.8 mm thick fixed on a powder coated Aluminium frame of size 63.5 x 46 x 1.2 mm with Stainless steel wire mesh of 0.36 mm dia with aperture of 1.40mm fixed with aluminium F chanel including provision of 5.0 mm thick tinted glass fixed with powder coated aluminium snap and rubber beading complete all as specified and directed.Note. (a)Aluminium anodised spring to be locking device 02 Nos of 100 mm long in each window.(b)Aluminium eye hook/stopper in each leaf.(c) Two sliding shutters of glass and one sliding shutter of SS wire mesh. |
| 39 | S&F Aluminium powder coated door shutters including hold fast/screws drilled, punching, anchorage rod, aluminium cleats (any no of panels) and making good the distrubed area with existing finishes so as to match with under mentioned specifications :-(a) Frame of door made out of section 101.60x44.5x2mm. (b)Shutters vertical side rails made out of section 85x44.45x2mm thick.(b)Shutters top rails made out of section 83.50x44.5x2mm. (c)Shutters middle rail made out of secttion 101.60x44.5x2mm.(d)Shutters bottom rails made out of section 114x44.5x2mm (e) 5 mm thick tinted glass with aluminium glazing clips, rubber beads area n.exc 1.5 Sqm.(f) 5mm thick tinted glassfixed with aluminium clips and rubber beads area not exc 1.5 Sqm.(g) 12 mm thick both side prelaminated particle board fixed with aluminium clips and rubber beads area not exc 1.5 sQM.(h) 100 mm dia round disc handle aluminium powder coated -02 No on each shutter.(f)200 mm long aluminium tower bolt-02 Nos on each shutter.(g) Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty ISI mark-01 Nos on each shutter. |
| 40 | S&F powder coatedaluminium anodized grill of 8 mm dia rod square, rectangular, circular or similar type of shape, fixed with channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) all as specified. |
| 41 | S&F Aluminium powder coated partition incl anchorage rod, aluminium cleats, drilling, punching, plastering and making good to the existing surfaces with under mentionedspecification and as directed :-(a) Aluminium section of size 49.91 x 44.45 x 2 mm thick, (b)5mm thick tinted glass with aluminium glazing clips and rubber beads, area n exc 1.50 Sqm (c ) 12 mm thick both side prelaminated particle board fixed with aluminum clips and rubber beads |
| 42 | S&F in repair double action floor door springhydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover,govering pivot made of mild steel heavy dutysuitable for Aluminium door complete all as specified . |
| 43 | S&F in repairs Steel rolling shutters 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:with gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 44 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all specifed and directed. |
| 45 | S&F Ball bearing for rolling shutters completed all as specified and directed. |
