|
| 1 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 2 | S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, complete all as specified and as directed. |
| 3 | S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC drop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed. |
| 4 | S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC stop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 6 | S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165, complete all as specified and as directed. |
| 7 | S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), complete all as specified and as directed. |
| 8 | Demolition of reed, lathing, single or Double and plaster or chicken wire lathing on walls, complete all as specified and as directed. |
| 9 | M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded crushed stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM (1:6), complete all as specified and as directed. |
| 10 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed. |
| 11 | M&L for reinfored cement concrete (nominal mix) in (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5m span, complete all as specified and as directed. |
| 12 | Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete, complete all as specified and as directed. |
| 13 | M & L mild steel TMT Bars10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed. |
| 14 | M & L mild steel TMT Bars 6mm to 8mm mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed. |
| 15 | Taking down cementplaster on brickor stone masonrysurfaces of walls etc includingrakingout joints, hackingfor key, scrubbingdown with wateretc, complete all as specified and as directed. |
| 16 | M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), complete all as specified and as directed. |
| 17 | M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated, complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only. |
| 18 | Supplyonly integral water proofing, complete all as specified and as directed. |
| 19 | M & L for Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed. |
| 20 | Material & Labour preparation of new plaster surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and as directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 22 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. |
| 23 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical suface like, dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick screed bed in cement mortar (1:4), complete all as specified and as directed. |
| 24 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level, complete all as specified and as directed. |
| 25 | M&L 75 mm thick PCC type C-2, (1:3:6) (using 40mm graded crushed stone aggregate) as in base of floor, path, plinth protection etc., complete all as specified and as directed. |
| 26 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, complete all as specified and as directed. |
| 27 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed. |
| 28 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blanketsany thickness, including cover fillets, complete all as specified and as directed. |
| 29 | S&F 605 X605 mm GI frame work forfor seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed. |
| 30 | M&L 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./ M.S. as per specification and drawing, complete all as specified and as directed. |
| 31 | Taking down chowkhatsor frame n.exc 1.50 Sqm andeach with shutter (without taking off shutters from the frame), complete all as specified and as directed. |
| 32 | Taking down chowkhatsor frame exc 1.50 andnot exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed. |
| 33 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 34 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 35 | S&F Powder coatedAnodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed. |
| 36 | S&F 4mm thick sheet glass, oridinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 37 | S&F Pressed steel frames of size 165x60 mm for door with oneor more rebates including necessary fixing lugs, butt hinges, lock strike plate etc, complete all as specified and as directed. |
| 38 | S & F factory made 30mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 39 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.180mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 40 | S&F 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 41 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed. |
| 42 | S&F 200mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed. |
| 43 | S & F 150mm size aluminium handle cast type anodised, complete all as specified and as directed. |
| 44 | S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed. |
| 45 | S & F in repairs 15mm bib tap cast copper alloychromium platedwith crutch or butterfly handle ,screwed down, scrwed for iron pipe or for brass ferrule and fixed of 15mm bore, complete all as specified and as directed. |
| 46 | S&F in repairs 15mm bore Stop/angle cock, fancy type, cromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and fixed, complete all as specified and as directed. |
| 47 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed. |
| 48 | S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and as directed. |
| 49 | S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 50 | S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. |
| 51 | S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc, complete all as specified and as directed. |
| 52 | S&F only 32 mm bore dia of discharge pipewaste coupling of PTMT (half or full threaded). (Minimum weight 32 mm -45 gms, complete all as specified and as directed. |
| 53 | M&L prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints, complete all as specified and as directed. |
| 54 | M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat ofIst grade enamel paint over a coate of red oxide primer zinc chrome, complete all as specified and as directed. |
| 55 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 56 | S&F of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. |
| 57 | S&F PVC (SWR) bends 110mm dia, complete all as specified and as directed. |
| 58 | S & F in repairs vitreous china wash hand basin, flat back size 450 x 300mm white with pedastal including MS brackets (excluding taps, saste, chain and plug and procelain stopper) etc, complete all as specified and as directed. |
| 59 | S & F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed. |
| 60 | S&F in repairs bevelled edge mirror of selected quality glass, of any 5.50mm thksize 600mmx450mm mounting on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including aluminium edging around of mirror, complete all as specified and as directed. |
| 61 | S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers, complete all as specified and as directed. |
| 62 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed. |
| 63 | M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990,PVC insulated andunsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmmcopper conductor cable (multistranded)PVC insulated and unsheathed FRLS cableas earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and platefor mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch, complete all as specified and as directed.NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black).2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. |
| 64 | All as per serial item No.63 here-in-before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire, complete all as specified and as directed. |
| 65 | All as per serial item No.63 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane/Horizontal plane, with cables, 1.5 sq. mm size, complete all as specified and as directed. |
| 66 | All as per serial item No.63 here-in-before buton independent board, complete all as specified and as directed. |
| 67 | All as per serial item No.63 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth forone 15 Amp, 6 pin socket on independent board, complete all as specified and as directed. |
| 68 | All as per serial item No.63 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size, complete all as specified and as directed. |
| 69 | S&F modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked, complete all as specified and as directed. |
| 70 | S&F modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked, complete all as specified and as directed. |
| 71 | S&F modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked, complete all as specified and as directed. |
| 72 | S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked, complete all as specified and as directed. |
| 73 | S&F lamp holder insulated,with LED lamp 12 wattPVC / polycarbonate /bakelite body, complete all as specified and as directed. |
| 74 | S&F ceiling rose surface bakelite 65x50mm three terminal, complete all as specified and as directed. |
| 75 | Supply and fixing energy efficient LED tube lights fitting 4\", 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 76 | Supply and fixing LED round/square shape 15 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed. |
| 77 | S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07including one bracket made of light gradeGI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable, complete all as specified and as directed.Make : Havells Cat No LHEXAY7PN6K030 or equivalent model of make Philips / Crompton Wipro/Surya |
| 78 | Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, complete all as specified and as directed. |
| 79 | Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 80 | Supply and fixing MCB/Isolator single pole (SP), 10 kAof 6 Amps to 32 Amps capacity240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 81 | Supply and fixing exhaust steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed. |
| 82 | Earthing complete with galvanized steel earth plate electrode 600x600x 6 mm buried directly in ground (earth pit not less than 2.25m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pitin PCC (1:3:6) type C-1, 50 mm thick pre cast RCC (1:2:4) typeB-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loosesoil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No.5 of MES SSRPart-I, complete all as specified and as directed. |
| 83 | M & L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm diaPVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked)with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, complete all as specified and as directed. |
| 84 | Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment. |
