|
| 1 | SCHEDULE \"A\" PART-I (REPAIR WORKS) |
| 2 | Taking down Cement Plaster on external/internal walls, ceilings, soffit of Chajja, roof projections, etc including raking out Joints, hacking for Key, scrubbing down with water and removing Debris, etc. to Outside MD/AF Land, incl necessary scaffolding etc complete all as specified and directed. |
| 3 | M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with & incl liquid water proofing compound @ 200 ml per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary scaffolding complete all as specified and directed. |
| 4 | M&L for uprooting of plants or vegetation growth from wallup to roof level, applying two coats of tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:3 mixed with & incl liquid water proofing compound @ 200 ml per 50 kg bag of cement in patches not exc 2.0 sqm and removal of debris outside MOD land and disposed off complete all as specified and directed by Engineer -in charge. |
| 5 | M&L for Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed. |
| 6 | M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed withwater proofing compound(as per manufacturer\"s instructions) on external surfaces ofbrick/stone walls or concrete surfaces finished even and fair up to 4 storey height including necessary scaffolding complete all as specified and directed. NOTE : Water Proofing compound shall be measured and paid separately as \"Supply only\". |
| 8 | Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed. |
| 9 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed. |
| 10 | M&L preparing undecorated Plastered surfaces of internal walls and treating with two coats of single component penetrative cum film forming interior water proofing coating (as per manufacturer\"s instructions) complete all as specified and directed.(MAKE: ASIAN PAINTS, SMARTCARE HYDROLOC / DR FIXIT, SURESEAL / BERGER, DAMPSTOP ADVANCED or similar products as approved by GE)NOTE: This item shall be executed only for surfaces severely affected by moisture or efflorescence before applying top coat finishes. |
| 11 | S&F in repair Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws complete all as specified and directed. |
| 12 | S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed. |
| 13 | S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, and jointing with Solvent Cement, complete all as specified and directed. |
| 14 | S&F in repairs 110 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed. |
| 15 | M&L Repairing of broken/damaged portions of RCC Projection, Chajjas, Roofs Facia, Column, etc. upto any height adhering proper safety precaution and including necessary preparation i.e. scrapping, cutting, chiseling, removing all loose concrete and cleaning exposed reinforcement with wire brush and applying one coat of cement slurry and filling the surfaces with min 25mm thick Cement Concrete 1:1½:3 (12.5mm graded stone aggregate), surfaces finished to match with existing surfaces complete all as specified and directed.NOTES : 1) Site for application is at various locations in patches with varying heights upto 12m. Contractor\"s quoted rate shall deemed to be inclusive of the ibid aspect. NO claim shall be entertained during currency of work.2) Cost of Formwork/Prop, scaffolding, safety gear shallbe deemed to be included in the Quoted Unit Rate. |
| 16 | SCHEDULE \"A\" PART-II (PERIODICAL SERVICES) |
| 17 | M&L for complete removal of existing treatment on old painted surfaces of internal walls and ceilings by scrapping andremoving treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of80 grit size having 7\"-9\" dia (as required) incl cleaning, watering to make the surface clean & free from dust, etc incl necessary scaffolding, safety & protective measures complete all as specified & directed.(NOTE: This item shall not be considered for areas measured under Item No. 1.01 here-in-before) |
| 18 | -ditto- but on exterior walls and soffits of chajjas, roof projections etc |
| 19 | M&L for complete removal of existing treatment on old painted surfaces of exterior walls and soffits of chajjas, roof projections etc, manually by scrapping andremoving layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed.(NOTE: This item shall not be considered for areas measured under Item No. 1.01 here-in-before) |
| 20 | M&L for applying1.5 mm thick waterproof wall putty (in two layers) on old/new plastered surfaces of exterior walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 21 | M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) duly mixed with stainer to achieve approved Tint/shadeover a coat of suitable exterior Primer (as per Manufacturer\"s instructions), using airless spray technology capable of operating single spray gun with hose of adequate length complete all as specified and directed. |
| 22 | M&L for applying1.5 mm thick wall putty (in two layers) on old/new plastered surfaces of internal walls etc, for smooth finish and finishing with two coats of Acrylic Distemper over a coat of suitable interior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 23 | M&L for applying1.5 mm thick wall putty (in two layers) on old/new plastered surfaces of internal ceilings etc, for smooth finish and finishing with two coats of Acrylic Distemper over a coat of suitable interior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 24 | M&L preparing old decorated Rough Cast plastered surfaces of Exterior Walls and applying one coat of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) duly mixed with stainer to achieve approved Tint/shade (as per Manufacturer\"s instructions), using airless spray technology capable of operating single spray gun with hose of adequate length complete all as specified and directed. |
| 25 | M&L preparing old decorated plastered surfaces of Exterior Walls and applying one coat of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) duly mixed with stainer to achieve approved Tint/shade (as per Manufacturer\"s instructions), using airless spray technology capable of operating single spray gun with hose of adequate length complete all as specified and directed. |
| 26 | M&L preparing old decorated/painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (1st quality), complete all as specified and directed. |
| 27 | M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed. |
| 28 | GENERAL NOTES FOR SCHEDULE \"A\" PART-II:-(A) Quoted rates shall deem to include for the following provisions :-(1)The work shall be carried out through an authorised applicator of paint manufacturer after concluding an MOU with the manufacturer for Company back guarantee. (2) MOU shall be submitted to GE by contractor along with Perfomance Security before issue of Work Order. In case of failure to do so, the contract will be cancelled and the contractor will be liable for penalties as stipulated in the tender documents.(3)Contractor shall procure the paint, distemper & primer directly from manufacturer and submit purchase voucher accordingly. Procurement from dealers is not acceptable under the subject contract.(4)Paint, Distemper and primer shall be supplied in sealed containers and shall be kept in MES Store under custody of concerned JE (Civil). The contractor\"s supervisor shall be responsible for daily collection of container from the concerned JE (Civil).contd.... |
| 29 | (5)All T&P, transportation, scaffolding, ladders, ropes, trestles, cradles etc shall be provided by the contractor under his own arrangements.(6)The contractor shall provide all necessary safety gear and ensure all safety precautions during currency of work. Deptt shall bear no liability in case of any accident due to negligence of the contractor.(7)Removing of nails, making good holes, cracks etc with suitable putty, crack filler etc.(8)Work in patches and in narrow width, bands cornices, pilasters etc and cutting in edge of line wherever necessary.(9)Providing, Spreading and removing protective covering to doors, windows, fittings, furnitures, appliances etc to protect them from splashes.(10)Washing floors, cleaning glass panes, joinery, electric fittings, wirings etc. Drops & splashes of primer, paint, distemper & putty to be cleaned to the entire satisfaction of Engr-in-Charge. |
