|
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 2 | Of area 3 sq. metres and below |
| 3 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 5 | Sal wood |
| 6 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 7 | Kiln seasoned selected planks of sheesham wood 30 mm thick |
| 8 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : ISI marked Stainless steel butt hinges with stainless steel screws : |
| 9 | For 2nd class teak wood and other class of wood shutters |
| 10 | ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. For 2nd class teak wood and other class of wood shutters |
| 11 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters |
| 12 | with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood |
| 13 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 14 | 20 mm dia (heavy type) |
| 15 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 16 | 250x16 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 18 | 200x10 mm |
| 19 | 100x10 mm |
| 20 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 21 | 125 mm |
| 22 | 100 mm |
| 23 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 24 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 25 | Twin rubber stopper |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 27 | 75 mm diameter |
| 28 | 110 mm diameter |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 30 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 31 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 32 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 33 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 34 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 35 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 36 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board |
| 37 | 610x460 mm bowl depth 200 mm. |
| 38 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 39 | Orissa pattern W.C. pan of size 580x440 mm |
| 40 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 41 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 42 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 43 | 10 litre capacity - White |
| 44 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 45 | White solid plastic seat with lid |
| 46 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 47 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 48 | Flat back wash basin of size 550x400 mm. |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 50 | 32 mm dia |
| 51 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 52 | Rectangular shape 453x357 mm |
| 53 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 54 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 56 | 15 mm nominal outer dia. Pipes. |
| 57 | 20 mm nominal outer dia. Pipes. |
| 58 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 59 | 15 mm dia. nominal bore |
| 60 | 20 mm dia. nominal bore |
| 61 | 25 mm dia. nominal bore |
| 62 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 63 | 32 mm dia. nominal bore |
| 64 | 40 mm dia. nominal bore |
| 65 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 66 | 25 mm nominal bore |
| 67 | 20 mm nominal bore |
| 68 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 69 | 15 mm nominal bore |
| 70 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 71 | 15 mm nominal bore |
| 72 | 20 mm nominal bore |
| 73 | 25 mm nominal bore |
| 74 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 75 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 76 | 15 mm nominal bore. |
| 77 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 78 | 15 mm nominal bore |
| 79 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 80 | 15mm nominal bore |
| 81 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 82 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 83 | 15mm nominal bore, 90 mm long. Weighing not less than 93 gms. |
| 84 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 85 | Concealed stop cock, 15 mm nominal bore, 108mm long. Weighing not less than 108 gms. |
| 86 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 87 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 88 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 89 | 100 mm nominal dia. |
| 90 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 91 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 92 | Supplying of unskilled labour for miscellameous maintenance works as per direction of Engineer-in-Charge. |
| 93 | Hiring electic welding machine at site including cost of operator and electrodes as per the direction of E-in-c. |
| 94 | Providing and fixing wire mesh of average width of aperture 1.40 mm and nominal diametre of wire 0.63 mm in wooden doors and windows with wooden fillets complete as per direction of Engineer-in-charge |
| 95 | Repair of brass/CP brass bib cock, stop cock, pillar cock etc by replacement of washers etc as per direction of Engineer-in-charge. |
| 96 | Supplying of spindles of CP brass bib cock, pillar cock, angle cock etc of approved quality |
| 97 | Providing and fixing 15 mm nominal bore GI socket, elbow, tee and nipple of approved quality |
| 98 | Providing and fixing PVC tank cover of approved quality as per direction of Engineer-in-charge. |
| 99 | Collecting complaints from complaints register, by telephonically or by other means from respective residents and officials of quarters, building etc. and getting the complaints executed complete as per direction of Engineer-in-charge. |
| 100 | Removal of chokage/leakage of floor traps, P traps, C.I. pipe etc and applying Dr Fixit wherever required as well as diposal of rubbish complete as per direction of Engineer-in-charge. |
| 101 | Cleaning of manhole including connecting sewerline by complete removal of rubbish etc and its disposal complete as per the direction of the Engineer-in-Charge. |
| 102 | Removal of sludge by mechanical means from septic tank and cleaning the same in land and around with water and disposal of sludge out side the compound at the authorized municipal dump or out of the township complete as per the direction of the Engineer-in-Charge. |
| 103 | upto 12cum sludge capacity |
| 104 | Credit of old unservicable material obtained during dismantling |
| 105 | wooden door and window of size up to 3 sqm |
| 106 | Mild steel sections , G.I. pipes etc |
| 107 | Brass/CP brass bib cock, stop cock, pillar cock, gate valve etc |
| 108 | 500 litre PVC water storage tank |
| 109 | Supply of \"Round-Up\" or equivalent chemical of approved brand and manufacture for drying of unwanted vegetations as per direction of Engineer-in-charge. |
| 110 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 111 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
