|
| 1 | Dismantling offloor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed. |
| 2 | M&L forglazed ceramic coloured tiles in vertical surfaces 450x350x7mm thick,setand jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including 10 mm thick rendering on fair faces of brick work in (1:4),complete all as specified and directed. |
| 3 | M&L for non skid ceramic colouredtiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.06 sqm not exc 0.11 Sqm asin floors,set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6) complete, all as specified and directed. |
| 4 | M&L for vitrified ceramic coloured tiles 10 mm thick light shade (square/rectangular)area of each tile exceeding 0.18 sqm but n.exc 0.38 Sqm as in floors,set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including15 mm thick cement screed bed in CM (1:6) complete all as specified and directed. |
| 5 | M&L for granite 20mm thick (of any type) work (table rubbed and polished)in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed. |
| 6 | M&L for machine cut kota stone slab flooring for landing and flooring 20 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded over and including15mm thick bedding layer in CM 1:6 including making hole for gas pipe as specified and directed. |
| 7 | M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing over and including 10 mm thick rendering on fair faces of brickwork / concrete in (1:4),complete all as specified and directed. |
| 8 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises. |
| 9 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified &directed. |
| 10 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 11 | Use and waste of formwork to chajjas and similar items including edges, rough finished complete all as specified and directed. |
| 12 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding steel wire (annealed) not less than 0.9mm dia, complete, all as specified and directed. |
| 13 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed. |
| 14 | Taking down cement plaster on brick work or concrete surfaces including racking out joints, complete all as specified & directed. |
| 15 | M & Lfor 15mm thick renderingon fair faces of brick wall or concrete surface in cement mortar 1:6,finished even and smooth without using extra cement, complete all as specified & directed. |
| 16 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 3% by weight of cement or as per manufacturer\"s instruction, finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 17 | M&L for 5mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces,finished even and smooth without using extra cement asonceiling surfaces, complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surfaces of ceilingsurfacesand applying two coats of white wash, complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat of 3mm thick finished coat ofwhite putty, complete all as specified and directed. |
| 20 | M & L applying two coats of cement base paint on newly plastered or unplastered wall surface including preparation ofsurfaces, complete all as specified anddirected. |
| 21 | Demolition of cement concrete of any description and in any position not otherwise specially provided for,complete all as specified and directed. |
| 22 | M&L for 75 mm thickPCC 1:3:6type C2 as in plinth protectionwith using 40mm graded stone aggregate etc all as specified. Note: Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in altranative bays not exceeding 3m in length. Joints of 6 mm wide 10 mm deep shall be provided along the wall and bays and same shall be filled with between mastic (1:3) |
| 23 | M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WC\"s etc shall be as under:- |
| 24 | Application of Two component acrylic modified cementitious coating.(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litanceand any other form of surface contamination. the installation instructions in manufacturer\"s published literature should be strictly compiled with, including but not limited to the following:-(bb) Chipping out any visible cracks in \" V- Groove\" pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROCNitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required. |
| 25 | (cc) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO.(dd) While the surface is still damp from saturation(SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer\"s instructions.(ee) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet.(ff) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer\"s instructions on the entire area.(gg) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.(hh) The waterproofing coating should be taken to a height minimu 300mm above the finished floor level on the vertical surface. |
| 26 | (jj) It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking.(kk) A protection plaster ( 12-15 mm thick) in CM 1:3admixed with appropriate integral water proofing compound as per manufacturer\"s instruction has to be applied on the walls.Admixture : - Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645.Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces.Admixutre : Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645 |
| 27 | (ll) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP.(mm) The membrane has to be protected in accordance with the manufacturer\"s recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer\"s recommendations.(nn) waterproofing treatment has to be carried out through applicators authorised by manufacturer.(ii) All the joints of pipes and traps within sunken portion shall be selaed properly by Epoxy sealant.(iii) All CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) all - round.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified.(v) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi) Providing 40mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified.Note :- Item No 23.5 (iv),(v) & (vi) shall be measured and paid separately. |
| 28 | M&L for providing GI pipe 40mm \"light grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and in similar work, complete, all as specified and directed. |
| 29 | M&Lfor PCC (1:5:10) type E2 using 40mm graded aggregateas in sub base and similar work, complete all as specified and directed. |
| 30 | M&L forPCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles and similarfinished even and smooth etc complete all as specified and directed. |
| 31 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed. |
| 32 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4.00 sqm each complete all as specified and directed. |
| 33 | S&F solid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening, complete, all as specified and directed. |
| 34 | S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specifed and directed. |
| 35 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. (Note: PCC for filling in frame shall be measured separately) |
| 36 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed.(Note: PCC for filling in frame shall be measured separately) |
| 37 | M&L forPCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed. |
| 38 | S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed. |
| 39 | S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed. |
| 40 | Dismantling boarding, cupborad any description, fixed in any position complete all as specified and directed. |
| 41 | S&F PVC cupboard of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm, M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed |
| 42 | S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterproof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed. |
| 43 | S&F prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shelf complete all as specified and directed. |
| 44 | S&F Stainless steel round closet rod of 40mm dia,2mm thick wardrobe hanger rod, rod for hanging clothes in wardrobe with end supports including all screwing fittings complete all as approved and directed. |
| 45 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, but type C-21 for PVC door shutter, size of hinges in 100mm. |
| 46 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed. |
| 47 | S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed. |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 49 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 50 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer, complete, all as specified and directed. |
| 51 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer, complete, all as specified and directed. |
| 52 | S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow \"P\" section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (d)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately. complete all as specified and directed. |
| 53 | S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 54 | Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed. |
| 55 | S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with metal beads all as specified all as specified and directed. |
| 56 | S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil puttyall as specified & directed. |
| 57 | S&F mild steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screwswith bolts incl leaping wooden complete all as specified and directed. |
| 58 | M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 59 | S&F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as speicified & directed. |
| 60 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed . |
| 61 | S & F CPVC pipes CPVC PIPE OUTER DIAMETER 16mm, SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed. |
| 62 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 63 | S & F CPVC pipes CPVC PIPE OUTER DIAMETER 20mm, SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed. |
| 64 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed,complete all as specified and directed. |
| 65 | S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 66 | S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low levelofMake 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etccomplete all as specified and directed. |
| 67 | S&F 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screwscomplete all as specified and directed. |
| 68 | S&F 20mm dia aluminium chromium plated tubular towel rails, \"D\" type,60cm long between flanges, complete all as specified and directed. |
| 69 | S&F in repairs PVC (SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cementcomplete all as specified and directed. |
| 70 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mmcomplete all as specified and directed. |
| 71 | S&F in repairsfor vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connectionscomplete all as specified and directed. |
| 72 | S&F in repairs shower rose 125 mm with brass chromium plated any colour or fixing with 15mm pipe complete all as specified and directed. |
| 73 | S&F kitchen sink with drainage board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 74 | S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and directed . |
| 75 | S&F soap dish chromium plated heavy duty complete all as specified and directed . |
| 76 | S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed. |
| 77 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing oretc and making good complete all as specified and directed. |
| 78 | Taking down eaves gutters and rainwater pipes including all fittings as specified and directed. |
| 79 | Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors as specified and directed. |
| 80 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 81 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as directed. |
| 82 | S&F 75 mm PVC (SWR) bendcomplete all as directed. |
| 83 | S&F 75 PVC (SWR) junction single,(single T)equal or unequal complete all as directed. |
| 84 | S&F in repairs 110 mm PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to walls, complete all as specified &directed. |
| 85 | S&F 110 mm PVC (SWR) bend, complete all as specified &directed. |
| 86 | S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as specified &directed. |
| 87 | S&F 75 mm PVC(SWR) vent cowlcomplete all as specified and directed. |
| 88 | Dismantiling water tank PVC 500 Ltrs and removing from sitecomplete all as specified and directed . |
| 89 | S&FRotational moulded polythene water storage tankstriple layered (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including PVC float valve 20mm size as specified in SSR Pt-1,complete all as specified and directed. |
| 90 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs, complete all as specified and directed |
| 91 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 15mm fixed in repairscomplete all as specified and directed. |
| 92 | S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)complete all as specified and directed. |
| 93 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs as directed. |
| 94 | Demolition of mud in roof any thickness including plastering & leeping removed as directed. |
| 95 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed. |
| 96 | Supply only integral water proofing compound, ISI marked. |
| 97 | Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer, apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with and including a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane, laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 98 | M&Lfor 40mm thick brick tiles laid on and including 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed . |
| 99 | All as per item No 94above but except brick tiles. |
| 100 | M&Lfor 75 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slabcomplete all complete all as specified anddirected. |
| 101 | M&Lfor cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed. |
| 102 | Earthwork in excavation by mechanical means (hydraulic excavator) means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and didposal of excavtaed earth lead upto 1.5m, complete, all as specified & directed. |
| 103 | Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified & directed. |
| 104 | Removing excavated material to a distance n exc. 50m away and depositing where directed at a level n exc. 1.5 m above the starting point, complete, all as directed. |
| 105 | M&L for Cutting into existing manhole for connecting new drains and making good for 200 mm bore pipe and rendering, cutting out existing benching and forming branch (1/2 or 3/4 section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates, surface finished even and smooth and reforming benching as reqd, all as directed.. |
| 106 | M&L forRCC 450 mm bore class NP2 pipe laid and jointed complete with collars laid in trenches and tested complete all as specified and directed. |
| 107 | M&L for providing precastcement concrete in windowor door cills , lintels, ditto but in landings, cover slabs ( for manholes etc) chullah hoods, chajjas, water troughsand similar articles set in CM 1:6 using type B1 (1:2:4) (20mm graded stone aggregate) all as specified and directed. |
| 108 | M&L for concrete bed to drain pipes450mm bore in cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) including packing under and completely surrounding pipes with concrete after they are laid and testedcomplete all as specified and directed |
| 109 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 110 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC (FRLS) insulated copper conductor common earth and connecting to earth dolly for :- |
| 111 | one light point controlled by one 1-way switch. |
| 112 | one ceiling / exhaust fan point controlled by one switch. |
| 113 | one three pin socket out let 5 amps on independent board complete. |
| 114 | one three pin socket out let 5 amps on same board complete. |
| 115 | one call bellpoint controlled by one bell switch. |
| 116 | one 2 way light point controlled by two 2 way switches. |
| 117 | All as per item no 106 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Voltsfor one 3 pin socket out let 15 amps on independent board. |
| 118 | S&F Switch piano type 6A 240 Volts complete all as directed |
| 119 | S&F Switch piano type 15A 240 Volts complete all as directed |
| 120 | S&F Socketoutlet 2 in 1,3 pin, 5/6 amp with shutters complete. |
| 121 | S&F Socketoutlet 2 in 1,3 pin, 5 and 15 amp with shutters complete. |
| 122 | S&F switch piano 2 way 6 Amps complete all as directed |
| 123 | S&F bell push switch piano type 5 Amps SP complete all as directed |
| 124 | M & L for ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed |
| 125 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 126 | S&F LED light fitting 1x20 watt, 220 volt AC decorative box type withdriver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 127 | S&F Lamp holder, PVC/Polycarbonate angular type with LED lamp base B-22(holder type) 7 watts including taking down old unserviceable Lamp holder, complete all as directed |
| 128 | S & F call bell, ding dong,AC 230 Volts, single phase complete all as directed |
| 129 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified & directed |
| 130 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lampimpact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with and includingGI bracket of dia 40mm light grade of suitable size, complete all as specified & directed |
| 131 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with copper wound complete all as specified and directed. Note: (1) Rate for taking down Ceiling fan & trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in quoted rate. |
| 132 | S&F metallicHeavy duty Exhaustfan copper wound with double ball bearing continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 RPM, 230V, complete all as specified and directed. |
| 133 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, with fixing arrangements & making hole of suitable size if necessory, complete all as specified and directed. |
| 134 | S&F Sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, Earth bar, double door SPN 8 way 230 volts, complete all as specified and directed. |
| 135 | S & F Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp. Complete all as specified. |
| 136 | S&F MCB, Single pole, 240 volts, 6-32 Amps, 10KA, B-series, . |
| 137 | S&F MCB SPN 240 volts 0- 32 Amps, 10KA, B-series. |
| 138 | M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) concealed conduitcircuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conduit (medium grade) including one run of PVC insulated multistrandedcopper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour, complete,all as specified and directed by Engr-In-Charge.Note :- (i) Two runs of 6.00 Sqmm cable & one run of 6.00 Sqmm cable incl PVC conduit shall be paid as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for newtral and green for earth lead. |
| 139 | S&F electric water heater, storage type ABS body with metalic inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, Automatic Thermal cut-out and multi function valves, NRV, 450 mm brass connection pipe etc., complete all as specified and directed. |
| 140 | M&L for earthingcomplete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plateusing 4 mm diaGI earth lead wire as earth lead moulded and rivetted to earthplate at one end and connected to main equipment at switch/control board at another end, GI earth leadprotected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate,GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mmthick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as directed. |
| 141 | Supply, installation, testing and commissioning of LT panel of size 800 mm x 600 mm x 300 mmenclosures cubical,weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door withfront openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters formounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wallduly powder coated with comprising of the following :- |
| 142 | INCOMING:-MCB 63 Amps, FP, 415 Volt , 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No .(ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three.(iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos(iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos.OUT GOING :-(i) MCB 40 Amp 240 Volt,10 KA, Single pole and neutral - 05 Nos. .(ii) Taking down energy meter of any capacity including connection and refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed. |
