|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil. |
| 2 | Excavating in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 mtr in depth and getting out in soft/loose type of soil complete all as specified and directed. |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing surplus excavated material (soil) to distance not exc. 50 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point completeall as specified and directed. |
| 5 | Material & Labour for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete completeall as specified and directed. |
| 6 | Material & Labour for Reinforced cement concrete (design mix) in M-25 (20mm graded stone aggregates) for foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 7 | Material & Labour for Reinforced cement concrete (design mix) in M-25 (20mm graded stone aggregates) for Columns, pillars, piers, posts and struts complete all as specified and directed |
| 8 | Material & Labour for Reinforced cement concrete (design mix) in M-25 (20mm graded stone aggregates) for roof Beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified and directed |
| 9 | Material & Labour for Reinforced cement concrete (design mix) in M-25 (20mm graded stone aggregates) in roof Slab supported in walls beams and columns in roof, Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed. |
| 10 | Material & Labour forFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed. |
| 11 | Material & Labour for Formwork to sides of pillars, posts, struts, piers,columns and stanchions Square, Circular rectangular on plan or polygonal complete all as specified and directed |
| 12 | Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.on flat rough surface complete all as specified and directed |
| 13 | Material & Labour for Formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed |
| 14 | Material & Labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed |
| 15 | Material & Labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed |
| 16 | Material & Labour for rendering 10mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete all as specified and directed |
| 17 | Material & Labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips completeall as specified and directed. |
| 18 | Material & Labour for mild steel TMT bars 6 mm to 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips completeall as specified and directed. |
| 19 | Material & Labour for Precast cement concreteblock masonry type C1 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10cm in width and, setting incement mortar 1:6 complete all as Specified. |
| 20 | Material & Labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in lintels upto 1.5 mtr clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required completeall as specified and directed. |
| 21 | Material & Labour forMoorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 22 | Material & Labour for Hardcore of broken stone or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exe 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified. |
| 23 | Material & Labour for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor is to be rough finished completeall as specified and directed. |
| 24 | Material & Labour for 75mm thick, PCC (1:3:6), Type C-1, using 20mm graded stone aggregate as in Plinth protection etc surface finished even and fair without using extra cementincluding necessary form work if required, provision of vertical joints at 2 mtr centre to centre complete all as specified and directedby Engr -in- charge. |
| 25 | Material & Labour for Coloured Vitrified tiles 8 mm to 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed |
| 26 | All as per item No 25 above but as in skirting over and including 10 mm thick rendering in cm 1:4 complete all as specified and directed |
| 27 | Material & Labour for Non Skid Ceramic tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.18 Sqm, 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. |
| 28 | Material & Labour for Glazed Ceramic tiles, Coloured, of size 300mmX600mmX7mm as in Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 29 | Material & Labour for 20mm thick Granite work (table rubbed and polished) in steps, jambs, cills, cooking platforms,counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, complete all as specified and directed.Note : The rate quoted is deemed to be included for full moulding of edges and making, opening for kitchen sink complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply & fix aluminium louvered ventilators of section size100mmx25mmx1.50mm including frosted glass 4mm thick fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh 0.36 mm nominal dia average width of aperture 1:40 mm dia fixed type on outside frame etc. all as directed by Engr-in-Charge. |
| 31 | Supply & fix Powder coated Aluminium grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws complete all as specified & directed |
| 32 | Supply & fix coloured UPVC window sliding type (3 track) with frame size 67mmx50mm, sash 46mm x 62mm having thickness 2.3mm both with and including two glass shutter and one stainless steel wire mesh shutter including all necessary hardware & fittings likejointing cleats, glazing clips, rubber packingwith 5mm plain float glass and 0.36mm dia SS wire mesh and average width of aperture 1.4mm , fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply & fix coloured UPVC door having thickness 2.0 mm with frame size 70mm x 64mm and shutter size 42.5mm x 26.7mm and including glazing 5 mm thick tinted glass or ACP sheet 4mm in panels, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleat,floor spring, iron mongary etc. including all fittings & hardwareshall be of following sizes:-Glazing beading: 0.70 mm thickAluminium handle \"D\" type: 150 mm size Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever,Aluminium stopper cleat Note :- (i) Making good of wall surface withmatching to existing surface completeall as specified and directed.(ii) PCC shall be measured and paid seperatelly. |
| 34 | Supply & fix Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and as directed. |
| 35 | Supply & fix Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C\" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and as directed. |
| 36 | Supply & fix Aluminium anodised barrel tower Bolt of 150 mm of extruded section complete all as specified and directed. |
| 37 | Supply & fix Aluminium cast type anodised Handle, size 150mm long complete all as specified and as directed. |
| 38 | Supply & fix 100 mm size, heavy weight Butt Hinges, cold rolled, Stainless steel including fixtures complete all as specified and as directed. |
| 39 | Material & Labour for new plaster surface applying two or more coats Wall Care Putty having average minimum thickness of 3mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of alkali resistantprimer on walls complete all as specified and as directed. |
| 40 | Material & Labour fornew plaster surface of ceiling applying three coats of white wash including preparation complete all as specified and directed. |
| 41 | Material & Labour for complete removal of existing treatment, preparing the surfaces and applying two coats of Finishing walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied@ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm)® upto 2 storey completeall as specified and directed.Make: Asian/Berger or equivalent |
| 42 | Cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cementmortar (1:3) and making good , cutting n.exc 10cm girthcomplete all as specified and directed. |
| 43 | Supply & fix 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed |
| 44 | Supply & fix 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed |
| 45 | Supply & fix looking mirror of any size nexc 1.50 sqm & 5mm thick mirror of selected quality glass, with bevelled edge fixed on wall with four nos. stainless steel studs decorative type complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Supply & fix Toilet paper holder Chromium plated brass fancy type with gold effect finishes complete all as specified and directed by the Engineer-in-Charge.Make :Hindware/Cera/Prayag |
| 47 | Supply and fixing CP soap dish holder with gold effect finishes completeall as specified and directed.Make :Hindware/Cera/Prayag |
| 48 | Supply & fix two way Bib cock 15mm dia, fancy type, chromium platedwith capstan or butterfly handle with gold effect finishes , screwed down, screwed for iron pipe or for brassferruleand suitable for 15 bore of pipe fixed complete all as specified and directed |
| 49 | Supply & fixtowel ring chromium plated brass fancy type with gold effect finishescomplete all as specified and as directed by the Engineer-in-Charge. Make :Hindware/Cera/Prayag |
| 50 | Supply & fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed. |
| 51 | Supply & fix Corner glass shelf with 200mm dia or above with stainless steel hinges and chromium finish holders/wall of approved make completeall as specified and directed |
| 52 | Supply & fix CP brass angular stop cock 15 mm dia with gold effect finishes complete all as specified and directed |
| 53 | Supply & fix CP brass , chromium plated shower roses with or without swivel joints with gold effect finishes , any size, including fixing to steel pipe or union complete all as specified and directed. Make :Hindware/Cera/Prayag |
| 54 | Supply & fix PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, completeall as specified and directed. |
| 55 | Supply & fixPVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, completeall as specified and directed. |
| 56 | Supply & fix bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & fix tubular towel rail 20mm dia, D type 60cm long between flanges brasschromium plated with gold effect finishes, complete all as specified and directed. |
| 58 | Supply & fix health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hookfixing to 15 mm bore of pipe with gold effect finishes complete all as specified and directed. |
| 59 | Supply & fix 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed with gold effect finishes completeall as specified and directed. |
| 60 | Supply & fix CP grating ring or frame square or round100mm size completeall as specified and directed. |
| 61 | Supply & fixwash down water closet EWC vitrious china white in colourone piece (including flush cistern, seat cover) with all fitting complete and fixing with outlet pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Cera/Hindware/Parryware. |
| 62 | Supply & fix under counter sunk vitrous china white wash hand basin oval shape of 600 mm x 480 mm with wash basin vanity cabinet made of PVC membrane door with hafle hinges, handles and all connecting accessories,bottal trap, etc (first quality) complete all as specified and as directed by Engineer-in-Charge.Make : HINDWARE/ CERA/PARRYWARE |
| 63 | Supply & fix chromium plated single lever basin mixer without popup waste system with 450mm long braided hoses with gold effect finishescomplete all as specified and as directed by the Engineer-in-Charge. Make:Jaquar / Parryware, |
| 64 | Supply & fix CP Peg set of four complete all as specified and directed.Make : KPS Sanitation(P)Ltd, (Economy classic Series) or equivalent of Prayag/Cera/ Parryware. |
| 65 | Supply & fixPVC (SWR) bends any radius bore of75 mm complete all as specified and directed. |
| 66 | All as per items No65 here in before but 110mm bore complete all as specified and directed. |
| 67 | Supply & fix ofPVC (SWR) pipes of 75mm dia single socketed,inanylength with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and directed |
| 68 | Supply & fix ofPVC (SWR) pipes of 110mm dia single socketed,inanylength with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and directed |
| 69 | Supply & fix Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 1000 Liters Capacity triple layered \"ISI\" marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts of PVC for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed. |
| 70 | Supply & fix20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed |
| 71 | Supply & fix decorative/fancy typepowder coated aluminium pipe 25mm dia and 2mm thickas in curtain rod fixed to brackets completeall as specified and directed. (shade and design as approved by GE)(Note :Brackets shall be measured and paid separately ) |
| 72 | Supply & fix decorative/fency type powder coated aluminium brackets fancy type for curtain rods completeall as specified and directed (shade and design as approved by GE) |
| 73 | Material & Labour for applying roof treatment as under :- |
| 74 | (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacturer\"s instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete all as specified and directed |
| 75 | (ii) Providing a coat of bitumen primer @ 0.40 Litre/Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and directed |
| 76 | (iii) Providing one layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with polyester non woven fabric (weighing not less than 150 Gms/Sqm). Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note: (a) Laying of APP based polymeric membrane shall be done by torch application method or as per manufacturar\"s instruction. (b) Side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer\"s instructions. |
| 77 | (iv) Applying two coats of bituminous aluminium paint on top of APP membrane. |
| 78 | Supply & fixDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 79 | Material & Labour for plain cement concrete1:4:8 type D-2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipe for 150 mm bore after they are laid and tested complete all as specified and directed. |
| 80 | Material & Labour for Precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in manhole\"s cover slab etc placed in position including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed. |
| 81 | Material & Labour for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling, mass concreteandsimilar work complete all as specifed and as directed. |
| 82 | Material & Labour for Salt glazed stone ware (SGSW) grade \"A\" pipe 150mm bore laid and jointed on concrete bed complete including testing complete all as specified and directed |
| 83 | Material & Labour for point wiring complete with 1.5 Sqmmsingle core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories conceled in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light /bell point controlled by one switch/bell push completeall as specified and directed. |
| 84 | All as per item No 79 above but for one 3 pin 5 Amps socket on same board controll with other switches on same board complete all as specified and directed |
| 85 | All as per item No 79 above but for one 3 pin 5 Amps socket on independent board complete all as specified and directed |
| 86 | All as per Item No 79 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor forPower Socketon independent board on the existing Concealed conduit completeall as specified and directed. |
| 87 | All as per Item No 79 here-in- before but with 4Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor forPower Socket/AC/Geysers on independent board on the existing Concealed conduit completeall as specified and directed. |
| 88 | Supply and fixmodular switch 1 way 6A 1 module completeall as specified and directed. |
| 89 | Supply and fix modular bell push6A 1module completeall as specified and directed. |
| 90 | Supply and fix modular socket 6A2/3 pin combined 2 module completeall as specified and directed. |
| 91 | Supply and fix modular socket 16A2/3 pin combined 2 module completeall as specified and directed. |
| 92 | Supply and fix modular switch 1way16A 1 module completeall as specified and directed. |
| 93 | Supply and fix Modular fan regulator, 120 watts 2 module completeall as specified and directed. |
| 94 | Supply and fixelectric bell Ding Dong, AC 230 volts completeall as specified and directed. |
| 95 | Supply and fix ceiling rose surface bakelite with three terminals completeall as specified and directed. |
| 96 | Supply & fix LEDfitting for Bldg security, 35 Watt230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete all as specified and directed including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fixon wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr length with necessary bending completeall as specified and directed . |
| 97 | Supply and fixing LED lights fitting 1x 20/22W, 220V,AC, decorative box type with driver, holder incl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and directed. |
| 98 | Supply & fix wall/ceiling mounted LED tube light fitting , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make :Jaquar/Halonix/Philips .Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc. |
| 99 | Supply and fixing LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V ACdecorative type with driver holder and LED lamp, Alluminium housing,including connecting up with three core flexible copper conductor cable of suitable size completecomplete all as specified and directed. |
| 100 | Supply & fix decorative wall mounted energy saving .3 wattt LED bedside light fitting flexible and adjustable to any direction with integral electronic driver complete with all accessories, Cat part No -SZWRFPX003 of Shakti to be fixed as per site requirement and connecting with three core flexible copper wire complete all as specified and directed by Engr-in-charge.Make :Shakti/Phillips /Havells/Crompton Note :- (i) The rates include the cost of Casing Capping and PVC service wire of lenght upto 2.5 mtr if required.(ii) Contractor has to make good the existing wall surface(if damaged during execution of work) at his own cost. |
| 101 | Supply & fix wall mounted high quality indoor wall bracket light cylinderical/oval shapeaesthetically designedfitting in wooden housing , glass and B22/E27 holder complete includinginverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed. |
| 102 | Supply & fixAngular Lamp holder, PVC/Polycarbonate type with LED Bulb of 11 Wattscomplete all as specified and directed. |
| 103 | Material & Labour for submain wiring in and including PVC conduit with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 volt grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid conduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc complete all as specified and directed. Note: Two runs of 4 sq mm and one runs of 4 sqmm cable along with conduit shall be measured as one length. |
| 104 | Supply & fix Vertical TPN distribution boards 100 Amps MCCB as incomer IP 43 Double door DB 06 way connect earth terminal with earthing complete all as specified and directed. |
| 105 | Material & Labour For new MCCB 4 pole of capacity 100 Amps, 16 KA, 415 Volts completeall as specified and directed. |
| 106 | Supply & fix MCB DB SPN 12 way of any size and capacity double door type horizontal with 200 Amp busbar including disconnecting from mains and making good the disturbed surfaces completeall as specified and directed. |
| 107 | Supply & fixMCB SP of capacity 5A to 32A \"B\" curve complete all as specified and directed. |
| 108 | Supply & fixMCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA‘’C” curve complete all as specified and directed. |
| 109 | Material & Labour for earthing with 600mmx600mmx6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5mtr below ground level, connected to and including G.I. wire of size 4 mm diaby means of bolts,nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 (20mm graded stone aggregate) & RCC Chamercover of size 540mm x 540mm x 100 mm made with RCC 1:2:4 Type B1 using (20mm graded stone aggregate) & 6 mm round MS bar for handle & 8 mm MS bar 15cm c/c,20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing completeall as specified and directed. |
| 110 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm ( For Toilet) complete all as specified and directed |
| 111 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min airdelivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed |
| 112 | Supply and fix singlepole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB complete all as specified and directed. |
| 113 | Supply & fix AC Three phase static energy meter of accuracy class 1.0, 3 X 240 V, 50 Hz with Backlit LCD display of rating 10 to 60 A complete all as specified and directedMake: L&T / HAVELLS/ ABB. |
| 114 | Material and labour for Water heater storage type of capacity 25 Litersvertical type wall mounted including 15/16 Amps plug topwith suitable wall supports and for manual operation,digital temperature display, feather touch buttons, built in thermostat, auto shut off, powder coated single line weld containerwith PUF insulation,heating element capacity of 2 KW, voltage rating 230 Volt, frequency 50 Hz, 5 star rated with and including steel braided connecting hoses of required length for Hot and cold water pipe, connectingto CPVC and GI pipe complete all as specified and directed by Engr-in-Charge. Make: Havells/Jaquar/Crompton/Bajaj.Note :- The rates are inclusive of all the minor spares (Fasteners, Clamps, Nut bolts washers etc) |
| 115 | Supply and fix Hot water pillar taps 15 mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fix Stop Valves , cast copper alloy, screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed of size 15 mm complete all as specified and directed by Engr-in-Charge. |
| 117 | Material & Labour for Cuttingexisting GI pipe of 50 mm dia for insertion of new tees (50x50x20)mm , branches etc. including necessary excavation work completeall as specified and directed. |
| 118 | Supply& laying pipe galvanised medium grade of 20 mm dia including all fitting (such as bends, elbows, tees required for reduce size as per site requirment, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc) and fixing complete with clips, wall hooks, wooden plug, or laying in trenches or fixed to wall /floor/roofincluding cutting screwing etc, complete all as specified and directed |
| 119 | Supply & fix Gun-metal, globe or gate valves with iron wheel head, srewed both ends for iron pipe and fixed for size 20m dia complete all as specified and directed |
| 120 | Material and labour for construction of brick masonry valve chamber of size, 105cm X 105cm x 105cm (internal) suitable for housing sluice valve/gate valve etc with plain cement concrete 1:4:8,type D-2, using 40mm graded stone aggregates for foundation, 100mm thick with 150 mm alround offset from external face of wall, brick work in cement motor 1:6, 230 mm thick, rendering 15mm thick in cement motor 1:4, inside complete and outside 150 mm below ground level, coping with plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregates, including provision of MS sheet cover 3.15 mm thick fixed to MS angle iron frame 40mm X 40mm X 6 mm embedded in PCC (1:2:4) type B1 (20 mm graded stone aggregate) with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer, including necessary excavation and earth work in any type of soil etc. complete all as specified and directed |
| 121 | Supplying, laying, jointing, commissioning and testing XLPEinsulated screened PVC bedded, armoured,heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugsof appropriate size, pvc sleeve etccomplete all as directed by Enginner in -Charge of size 25 Sqmm 4 core . Make :- Havells / Gloster / Finolex / Polycab |
| 122 | Excavating in trenches not exc 1.5mtr wide and not exc 1.5mtr in depth for laying UG cable, pipe line, foundation of poles etc and getting out in hard / dense soil completeall as specified and directed. |
| 123 | Material & Labour for riddled earth cushioning to under ground cable in trenches/ existing cable trenches/ductsin layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable completeall as specified and directed by Engr in charge.Note:- Measurement shall be taken after gentling punning. |
| 124 | Material & Labour for Brick \" sub class B \" protection for under ground cable complete all as specified & directed . |
| 125 | Supply & fix in repair light grade GI pipe of size 40 mm dia conforming to IS 1239 (Part-1): 2004 laid in trenchs or under floors or fixed on polefor cable protection completeall as specified and directed by Engr - in - Charge. |
