Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-01-2026 | Date | Date | 20-01-2026 |
| 2 | 06-01-2026 | Revised BOQ | BOQ | 13-01-2026 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified.(The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface) |
| 2 | Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from sitecomplete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface) |
| 3 | Taking down door shuttersand refixing in same opening after carryiong out alteration of any description area exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and as directed. |
| 4 | Demolition of cement concrete of any description at any floor not other wise described complete all as specified and as directed. |
| 5 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work,complete all as specified and as directed. |
| 6 | Taking up or down 15 mm bore steel tubing and connections including cleaning, threadingfor refixing or removal to store,complete all as specified and as directed. |
| 7 | Taking up or down 20 mm bore steel tubing and connections including cleaning, threadingfor refixing or removal to store, complete all as specified and as directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and as directed. |
| 9 | PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and as directed. |
| 10 | Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4 complete all as specified and as directed. |
| 11 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 12 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per complete all as specified and as directed. |
| 13 | S&F 150 mm long aluminium anodised barrel tower bolt of extruted section ISI markedcomplete all as specified and as directed. |
| 14 | S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified and as directed. |
| 15 | S&F Stainless Steel Butt hinges, medium weight,100mm long, complete all as specified and as directed. |
| 16 | M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed block for securing hold fasts etc complete all as specified and as directed. |
| 17 | S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed. |
| 18 | S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed. |
| 19 | S&F pressed steel frame of size 60X40mm for cupboard doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 20 | M&L PCC 1:3:6 (using 12.5 mm graded aggregate as mass concrete filling in hollow portion of the door frames complete all as specified and as directed. |
| 21 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and supply & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 22 | Supply and fixing of 35 mm thick single piece factory made wire gauge shutter and incl of wire cloth(stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG ,size 19x19 mm complete in all respect with lock rail & beautified all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011complete all as specified and as directed.. |
| 23 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed. |
| 24 | S&F 300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section complete all as specified and as directed. |
| 25 | S & F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller platecomplete all as specified and as directed. |
| 26 | S&F for 150mm long floor door stopper of Stainless Steel body and tongue, with hard drawn steel spring complete all as specified and as directed. |
| 27 | S& F in repair Mild steel chromium plated curtain rod 25 mm dia with supply & fixing brackets ,stops ,rollers,globe ,knobetc, of standard thickness and of any length complete all as specified and as directed. |
| 28 | S & F in repair 18 mm thick factory made 100 % WPC decorative flush shutter(for cupboard and vanity etc)made from coextruded three layer rigid foam sheet (single extruded ) with 0.8 to 1 mm rhick outer layer having density not less than 1400 kg/cum ,complete all as specified and as directed. |
| 29 | Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm, complete all as specified and as directed. |
| 30 | S&F Aluminium handles D type anodised 100 mm long ISI marked complete all as specified and as directed. |
| 31 | S&F 100 mm Hasp and staple,Stainless Steel, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 32 | Mild steel magnetic catches of size 50 mm, complete all as specified and as directed. |
| 33 | M&L Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles )300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost is allowed for Removing and re-fixing and necessary cutting of door etc if anyduring execution of work) |
| 34 | M&L for Colored glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thickset over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed inwhite or colored cement to match complete all as specified and as directed. |
| 35 | M&L Non Skid digital pattern Joint less coloured tiles 7 to 8mm thick (square/ rectangular) polished, area of each tilesexceeding 0.16 sqm and n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 36 | Allas per item 35 above, but on vertical surfaces over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed inwhite or colored cement to match complete all as specified and as directed. |
| 37 | S & F Machine cutkota stone slab flooring 18-20 mm thick over and including cement screedbase 15 MM thick in CM 1: 6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.Note : Single piece kota stone to be used for steps |
| 38 | S & FKota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishingcomplete all as specified and as directed.Note : Single piece kota stone to be used for steps |
| 39 | Cutting chases, pinning through brick wallin. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 40 | Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 20 mm outer diawith all fittingslike socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 41 | Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of25 mm outer diawith all fittingslike socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 42 | S&F in repairs Angle cock fancy type chromium plated withcapstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and as directed. |
| 43 | S&F fancy type Brass CP Wall mixer with L bend for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified and as directed. |
| 44 | S&F in repairsbibtap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and as directed. |
| 45 | S&F in repairs Vitreous china Orissapan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’trap, front or back inlet and integral foot rest complete includinglime concretebedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphonpipe complete all as specified and as directed. |
| 46 | S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts and flushing cistern) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etccomplete all as specified and as directed. |
| 47 | S&F in repairs Vitreous chinawash hand basin corner type, white , flat back, size 450X300 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand ,32 mm waste coupling and waste pipe of 75 mm long complete all as specified and as directed. |
| 48 | S&F in repairs PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type complete all as specified and as directed. |
| 49 | S&F PVC connection 45 cm long fitted withPTMT nut andwasher on both ends, fixed to 15 mm bore iron pipes complete all as specified and as directed. |
| 50 | S&F 15 mm bore brassCP basin mixer for mixing hot and cold water screwed down for iron pipes and fixed in repairs complete all as specified and as directed. |
| 51 | S&F in repairs Brass chromium plated shower rose, fancy type,125mm with swivel joints and 300 mm long arm with including fixing topipe or union fixed, complete all as specified and as directed. |
| 52 | S&F fancy type Brass CP kitchen Sink Wall mixerfor mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified and as directed. |
| 53 | S&F Chromium plated grating 100mm dia complete all as specified and as directed. |
| 54 | S&F PVC (SWR) floor trap , plainincluding jointing with solvent cement 75mm bore fixed in repairscomplete all as specified and as directed. |
| 55 | S&F PVC (SWR) pipes 110mmsingle socketed , in any length with rubber ringjoints ,fixed to walls /floor complete including dismantling existing pipes of any description complete all as specified and as directed. |
| 56 | S&F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor complete including dismantling existing pipes complete all as specified and as directed. |
| 57 | S&F PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and as directed. |
| 58 | S&F PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified and as directed. |
| 59 | S&F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and as directed. |
| 60 | S&F PVC (SWR) juncton single (single T ) equal or un equal withaccess door 75 mm fixed in repairscomplete all as specified and as directed. |
| 61 | S&F PVC (SWR) juncton single (single T ) equal or un equal withaccess door 110mm fixed in repairscomplete all as specified and as directed. |
| 62 | S&F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 63 | Box type steel window comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts , PCC bed blocks etccomplete all as specified and as directed. |
| 64 | M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms over and including 15 mm thick backing coat cement mortar (1 : 4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 65 | Glass fibre reinforced modified cementitious coating system before the final coat of(or equivalent) in Sunken treatemen. Base coat :(or equivalent),Consumption base coat : 0.3 Kg/Sqm, Reinforcement : Glass fiber, Second and Third coat :(or equivalent), Consumption top coat: 3 Kg/Sqm, System requirements : density: 2.00 Kg/Ltr, Compressive strength : 0.5 N/Sqmm. (i) Wall penetration through the RCC slab must be sealed using Berger HS Repir (or equivalent). (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto 1.5 Mtr. (iii) All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus(or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry, including cleaning ofRCCsurface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc Note :-(a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator after conclude of tender and before place of Work Order Documents as mentioned in NIT.(c) The work pertaning to periodical services & water proofing shall be executed from authorized applicator through manufacturer of which the material i.e.paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE |
| 66 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement completeall as specified and as directed (WPC to be measured separately) The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. |
| 67 | M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed. |
| 68 | M&L for cutting/drilling hole in Brick wall/RCC beam by mechanical mean exc 300mm deep in slabof WC/ Bathincluding fixing 40mm dia 450mm long GI Spoutspipecomplete all as specified and as directed. |
| 69 | Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, including 8 mm square grill complete all as specified and as directed. |
| 70 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed. |
| 71 | S&F Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed. |
| 72 | S&F in repairs Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and as directed. |
| 73 | Complete removal of existing roof treatment or roof tile and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed. |
| 74 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in, repair complete all as specified and as directed. |
| 75 | One component liquid ,solvent free ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties. (i) UV resistant, prevent yellowing and weathering. (ii) Highly elastic upto 350% and crack bridging.(iii) Excellent adhesion on porous and non-porous substrates.(iv) Tensile Strength >10 N/Sqmm with GeoTextile fleece. (v) Solar Reflective Index (SRI) more then 109-111ASTM E1980-11. System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoatPrimer(or equivalent), Coverage : 0.2Kg/Sqm (with 50% dilution of water), Reinforcement: Geotextile 40 gsm, Second coat:Home sheild roofkoat (or equivalent), Consumption: 0.5 Kg/Sqm, Third coat: HS PU roofkoat (or equivalent), Consumption : 0.8 Kg/Sqm. System buildup -1.5Kg/Sqm with geotextile of 40gsmNote :-(a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator after conclude of tender and before place of Work Order Documents as mentioned in NIT.(c) The work pertaning to periodical services & water proofing shall be executed from authorized applicator through manufacturer of which the material i.e.paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE |
| 76 | PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this itemcomplete all as specified and as directed. |
| 77 | Capillary rise treatment of walls, Consumption base coat: 0.3 Kg/Sqm, Second and Third coat : Latex sheild 2K (or equivalent), Consumption top coat: 3 Kg/Sqm, System requirements : density : 2.00 Kg/Ltr, Compressive strength: 0.5 N/Sqmm. complete all as specified and as directed.Note :-(a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator after conclude of tender and before place of Work Order Documents as mentioned in NIT.(c) The work pertaning to periodical services & water proofing shall be executed from authorized applicator through manufacturer of which the material i.e.paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE |
| 78 | S&F in repairs Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank of complete all as specified and as directed. |
| 79 | S&F Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixedin repairs, complete all as specified and as directed. |
| 80 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in CM 1:6 complete all as specified and as directed. |
| 81 | Material & Labour for RCC chajja/fascia/parapet repair by using following steps :-(a) Removal of existing concrete along with loose damaged and cracked concrete/cover concrete from chajjas etc, exposing corroded steel reinforcements upto a depth of 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement all as directed by Engineer-in-charge. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed.(b)Cleaning the surface of reinforcement bars from dust by using wire brushes and dry cloth and applying FOSROC Rebakleens RR- Rust Remover or equivalentusing small brush and allow to react it for 16-24 hrs. (c) Providing and applying two coats of Fosroc Nitozinc Primer - two component, zinc rich epoxy, anti-corrosive protective coating or equivalentby brushes to the exposed and cleaned rebars with an interval of 45minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours all as directed by Engr-in-Charge. |
| 82 | (d) Cleaning the concrete surface thoroughly once again using wire brush and applyingone liberal coat of Fosroc Nitobond EP- two component Epoxy bonding agent or equivalent to the parent concrete with brush. (e) Providing and applying 50 mm thick Renderoc SP 40 - or equivalent Polymer modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar after mixing of Renderoc SP 40 or equivalent with recommended qty. of water using slow speed drill fitted with mixing paddle and then applying the same to prepared surface and finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface all as directed by Engr-in-Charge.Note : Item rate is inclusive of all materials, labour, tools and plants, scaffolding and transportation etc. complete as per specifications and as directed by Engr-in-Charge |
| 83 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed. |
| 84 | 15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. |
| 85 | M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaceseven and smooth without using extra cement all as specified and as directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. |
| 86 | 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsetc 10 mm thick im CM 1:6 and 5 mm thick inCM 1:4incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 87 | Supply only WPC complete all as specified and as directed. |
| 88 | 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingsurface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weightcomplete all as specified and as directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.) |
| 89 | M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered ceiling surfaces including one coat of alkali resistant primercomplete all as specified and as directed. |
| 90 | Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of ceiling andprimed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machine complete all as specified and as directed. |
| 91 | M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 92 | Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of walls and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machinecomplete all as specified and as directed. |
| 93 | M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered wall surfaces including 3 mm thick wall care putty ,primed with one coat of alkali resistant primer complete all as specified and as directed. |
| 94 | Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of new surfacescomplete all as specified and as directed. |
| 95 | Material and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture\"s instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in subsequent coats of paintcomplete all as specified and as directed. |
| 96 | Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by Berger Bison Putty / crack fill paste of Berger Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture\"s instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed.Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make: Berger PaintsWeathercoat Long LifeFlexo / Nerolacexcel Total / Asian Paint Apex Ultima / JK Maximo UltraThe work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. |
| 97 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each panecomplete all as specified and as directed. |
| 98 | S&F sinks with drainage board made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mm x460 mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and as directed. |
| 99 | Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and as directed. |
| 100 | Kitchen plate rack of stainless steel of size \"30x31x10\" inchescomplete all as specified and as directed. |
| 101 | Demolition of reinforced cement concrete of any description and in any positoncomplete all as specified and as directed. |
| 102 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 103 | M & L for PCC 1:4:8 type D2 ( 40 mm graded aggregate )as in sub base to flooring 75 mm thickcomplete all as specified and as directed. |
| 104 | Cutting holes into or through brick walls (Superficial area Exc 150 sq. cmbut n exc 400 sq cm) built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as requiredcomplete all as specified and as directed. |
| 105 | M&L for applying one coats of synthetic enamelled paint on steel or iron surfacebased materials of any description , not other wise described over 10 cm width or girth including preparation of old surfacescomplete all as specified and as directed. |
| 106 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and as directed. |
| 107 | Formingholes exc. 50 cu cm but n exc 100 cu cm for balusters, newels, rag-bolts, etc. and grouting with cement mortar 1:2 after balusters, etc. are fixed,complete all as specified and as directed. |
| 108 | S&F steel fasteners of size 75 mm long steel supports fixed to wallscomplete all as specified and as directed. |
| 109 | Excavation in trenches, not exc 1.5m wide not exc 1.5m in depth: for foundation, etc, or for shafts , wells cesspits, manholes, pier holes, etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out, in any type ofsoilcomplete all as specified and as directed. |
| 110 | Demoliton/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and takingout off trenches and removing the debris from the site all as spd of 150mm/200 mm dia pipe inclding demoilition of cement concrete haunching etccomplete all as specified and as directed. |
| 111 | M&L concrete bed to 150 mm bore pipe in D2 1:4:8 (40mm graded aggregate) inclduding haunching against the sides of pipecomplete all as specified and as directed. |
| 112 | S&F 150mm dia DWCPE(SN8) HDPE pipes laid intrencheson PCC bed incl jointing as per manufacturers instructions and as directed (Bedding/ Haunching and earthwork paidseparately under respective items of Schedule)complete all as specified and as directed. |
| 113 | Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cmcomplete all as specified and as directed. |
| 114 | Removal of surplus excavated soil to a distance exc 250 m & not exc 500m and deposited where directed at a level not exc 1.5 m above the starting pointcomplete all as specified and as directed. |
| 115 | M&L providing precast cement concrete in cover slab (for manhole) type B1 1:2:4 (20mm graded aggregate) set in CM 1:4complete all as specified and as directed. |
| 116 | M&L MS TMTbars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT barscomplete all as specified and as directed. |
| 117 | Taking out of solid/semi solid sludge from existing main holes of any size and any depth and burying the entire sludge/sludge water in to excavated pit of adequate size including excavation and covering with earth or disposing off into covered vehicles outside the periphery of defence land to a distance exceeding 1 KM including taking off RCC/iron main holes covers and refixing the same after clearing. |
| 118 | S&F PVC (SWR) pipes 75mmsingle socketed, in any length with rubber ringjoints fixed to walls /floor complete for disposal of waste water from washing machinecomplete all as specified and as directed. |
| 119 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access doorcomplete all as specified and as directed. |
| 120 | S&F 75mm PVC (SWR) junction double, (double T) equal or unequal with access doorcomplete all as specified and as directed. |
| 121 | S&F PVC (SWR) bends with oval access door 75mm fixed complete all as specified and as directed. |
| 122 | Takingout carefully old copper/aluminium point wiring,Light,fan,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floorscomplete all as specified and as directed. |
| 123 | Taking down old distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed. |
| 124 | Taking down existing unserviceable submain wiring any size and making good the disturbed surfacecomplete all as specified and as directed. |
| 125 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfacecomplete all as specified and as directed. Note: The rates quated above are inclusive of sunken boxes of suitable sizes and white modular cover plate of suitable module as per site requirment. |
| 126 | All as per item No 125 above but for one fan/Exh point controlled by one modular switchcomplete all as specified and as directed. |
| 127 | All as per item No 125 above but One light point controlled by two way switch complete all as specified and as directed. |
| 128 | All as per item No 125 above but for one bell point controled by one bell push all as specified and as directed. |
| 129 | All as per ser item No 125 hereinbefore but for one 3 pin socket outlet 5 Amp Same board complete all as specified and as directed. |
| 130 | All as per ser item No 125 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and as directed. |
| 131 | All as per Item no 125 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wirecomplete all as specified and as directed. |
| 132 | Supply and fix modular type switch, one way 6 Amps , 1 modulecomplete all as specified and as directed. |
| 133 | Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and as directed. |
| 134 | Supply and fix modular type switch, one way 16 Amps, 1 modulecomplete all as specified and as directed. |
| 135 | Supply and fixmodular type socket 5 pin, 6 Amps 2 modulecomplete all as specified and as directed. |
| 136 | Supply and fixmodular type socket 5 pin, 6 A/16 Amps2 modulecomplete all as specified and as directed. |
| 137 | Supply and fix of Ceiling rose surface bakelite three terminals 240 voltscomplete all as specified and as directed. |
| 138 | Supply and fixLamp holder PVC case body of Bakelite with back plate suitable for batten fittings ,complete all as specified and as directed.. |
| 139 | S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installationcomplete all as specified and as directed. |
| 140 | Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base complete all as specified and as directed. |
| 141 | Supply and fix of Bell push flush type modular 5 Ampcomplete all as specified and as directed. |
| 142 | Supply and fixBell multi music 230 volt ,AC single polecomplete all as specified and as directed. |
| 143 | Supply and fix of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fittingcomplete all as specified and as directed. |
| 144 | Supply and fix of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fittingcomplete all as specified and as directed. |
| 145 | Supply and fix factory made epoxy powder coated Distribution board VTPN 4 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoingcomplete all as specified and as directed. |
| 146 | Supply and fix factory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoingcomplete all as specified and as directed. |
| 147 | All as per srl Item No- 146 above but 2 ways Single door complete all as specified and as directed. |
| 148 | Supply and fixing 240V, 10 KA \"B\" curve MCB SP-06 to 32 Ampcomplete all as specified and as directed. |
| 149 | Supply and fixing 240V, 10 KA \"B\" curveMCB SPN 32 Amp 50Hz AC supply,complete all as specified and as directed. |
| 150 | S&F MCCB 415 Volt 16 KA 4 Pole 63 Ampscomplete all as specified and as directed. |
| 151 | S&F single core PVC insulated unsheathed multistanded copper conductor cable 1.5 Sqmm , 1100 Volts ISI marked drawn through existing point wiring complete all as specified and as directed. |
| 152 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surfacecomplete all as specified and as directed. |
| 153 | M & L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire4 mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and alsoremoval of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingallcomplete all as specified and as directed. |
| 154 | Supply and fixing LED Bldg security light35W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens & toughned glass IP-66, Electronic driver with APFC,Lower THD,Open ckt protection,Overvoltage protection,surge protection upto 10KVwith built in SPD and mounting bracket of suitable size as complete all as specified and as directed. |
| 155 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 156 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at sitecomplete all as specified and as directed. |
| 157 | M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing wallscomplete all as specified and as directed. |
| 158 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed complete all as specified and as directed. |
| 159 | Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surfacecomplete all as specified and as directed. |
| 160 | Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed. |
| 161 | Supply and fix Anti Suicide Fan Rod of suitable size and length with the provn, If the load on fans exceeded 22 kgs, than the smart rod/pipe opens from its centre and spring in the pipecomplete all as specified and as directed. |
| 162 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipes two Nos etc all as specified and directed. |
| 163 | Cutting existing steel tubing15 mm bore for alterations or additions (Each cut measured) complete all as specified and as directed. |
| 164 | Screwing existing steel tubing 15mmfor alterations or additions complete all as specified and as directed. |
| 165 | S & F Tubes medium grade galvanized 15 mm borewith and including all fittings such as bends, elbows, tees,shortv pieces ,connectors , bolts, nuts ,diminishing pieces , caps , plugs ,unions etc and fixed completeto walls & ceilings or laid in floorscomplete all as specified and as directed. |
| 166 | S&F Stop 15mm borebib taps (long body) cast copper alloy , fancy type , chromium plated with fancy knob ,screwed down , screwed for iron pipe or for brass ferrulecomplete all as specified and as directed. |
| 167 | S&F fancy type chromium plated stop valve screwed downhigh pressurewith fancy knobwith long shank and cup , screwed both ends for 15mm bore dia pipes and fittings or for unionscomplete all as specified and as directed. |
| 168 | S&F PVC connections 15mm size with PTMT nuts of length 450 mmcomplete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
