Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of Brick tiles or terracing tiles, single layer on roofs. |
| 2 | S&F for Heat Resistant TerraceTiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and incl 20 mm thick screed bedding layer in cement sand mortar 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same manner. |
| 3 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 15 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 incl taking down of old tubing complete all as specified and as directed by Engineer-in-Charge |
| 4 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 20 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 incl taking down of old tubing complete all as specified and as directed by Engineer-in-Charge |
| 5 | S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 25 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 incl taking down of old tubing complete all as specified and as directed by Engineer-in-Charge |
| 6 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engineer-in-Charge |
| 7 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engineer-in-Charge |
| 8 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engineer-in-Charge |
| 9 | S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable tankcomplete all as specified and directed |
| 10 | Description all as per item no 9.00 above but 1000 ltr capacity complete all as specified and directed |
| 11 | S&F in repair PVC water tank cover complete set of capacity 500 Ltr to 2000 Ltr. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 13 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (GdeE- 250) qualityAcomplete all as directed and specified. |
| 14 | M&L for MS rolled section as in main and cross beams, hip and jack rafters , purlins, where connected to common rafter, post and running rails and guided for sliding doors fixed with angle cleats and other connecting plates complete all as specified. |
| 15 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 16 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed. |
| 17 | M&L for providing RCC 1:1.5:3 type A-1 (using 20 mm grade stone aggregate) asin slab supportetd on walls, shelves, Chajjas, cantileversorsimilar workcomplete all as specified and as directed. |
| 18 | M&L for Formwork to Chajjas through and similar items including edges andsimilar work complete all as specified and as directed. |
| 19 | M&L TMT bars 10mm dia and over in reinforcementcut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified. |
| 20 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersin reinforcementcut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified. |
| 21 | Demolition of brick work/stone bulder measonary built in cement mortar or cement lime mortar of any description and in any position all as specified. |
| 22 | M&L for brick work in CM (1:4) straight or curved on plan exc 6.0m mean radius and using old size sub class \"B\" bricks all as specified. |
| 23 | M&L for providing and injecting chemical emulsion for post construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed. |
| 24 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. complete all as specified and directed. |
| 25 | M&L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincl 15mm thick screed bed in cement mortar 1:6, includingdismantling of old tilesremovingrubbish off the premisescomplete all as specified and as directed |
| 26 | M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:6),includingdismantling of old tilesremovingrubbish off the premises complete all as specified and directed. |
| 27 | Description all as per item No. 26 above but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 28 | M&L for Vitrified ceramic tiles ultra charged (dark shade) 10mm thick (square/rectangular) area of each tileexc 0.42 sqm but notexceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:4) complete all as specified |
| 29 | Description all as per item No. 28 above but on vertical surfaces such as skirting / dados with and including10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 30 | M&L for Glazed ceramic coloured tiles in vertical surfaces 600 x 300 / 450 x 350 x 7-8mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and incl 10mm thick CM (1:4) backing coat, includingdismantling of old tiles removing rubbish off the premises complete all as specified and directed. |
| 31 | M & Lfor 18 to 20 mm thick granite (of any type) work( table rubbed and polished) injambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slabincluding 10 mm thick screed bed in CM 1:4 includingrounding to edge of granite also incl dismantling of old slab as per required complete all as specified anddirected. |
| 32 | Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, incl dismantling of old ceiling any type all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 33 | M&L for decorative wall panelling with PVC louvered/Fluted/Plain 2D/3D wall panels with plastic and silicate mixture as the core materialwith in and surface with PVC foil on the top with thickness of panel 10mm to 20mm,width of 150mm to 200mm and length of 2.74/3.05 (9\" or 10\") meters of POLYWOOD or equivalent brand Wt of PVC pannel is 4.5 kg/sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge. Note:The rates are inclusive of corner profiles and fillets |
| 34 | S & F in repairmodular wardrobe, cupboards, cabinets, drawers, shelfs, vanity , dressing table incl shutters (depth of 45 cm to 70 cm) etc all front, bottom,top, two sides and partitions etc made out of 15-18mm thick WPC board and back side made out of 8-10 mm thick WPC board ( make : Rajshri or equivalent as approved by GE) with machine pressed 0.7 to 1 mm thick glossy colour laminate on all exposed front side and other sides decorative laminations. All exposed edges of board with machine pressed edges band 0.8mm from rehau germanetc incl all accessories of fittings - auto/soft closing hinges for shutters, C/J gola profile for handleless or SS handle , telescopic channels 18/20\" long, rollers fro smooth sliding of drawers, magnetic catch etc all fittings complete all as specified and directed by Engr-in-charge ( Note - only front face shall be measured and paid irrespective ofarea of WPC board provided and fittings as required shall be deemeed to be incl in the quoted rates by the contractor. |
| 35 | S&F in repair soft closing hinges (L Bihari) complete all as specified and as directed by Engr-in-Charge. |
| 36 | S&F in repair Telescopic channels 300mm long of chromium plated steel, superior qualitywith stainless steel ball rollers for fixing to cabinets drawers. complete all as specified and as directed |
| 37 | S&F in repair 15 mm size Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed. |
| 38 | S&F in repair 15 mm size Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 39 | S&F in repair 15 mm size Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 40 | S&F in repair 15 mm size fancy type Stop valves, cast copper alloy, screwed down, high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified and directed. |
| 41 | S&F in repair 125mm Chromium plated shower roses with or without swivel joints, with shower arm 300/600 mm long any size, including fixing to steel pipe or unioncomplete all as specified and directed. |
| 42 | S&F in repair Plastic water closet seat cover White closed pattern with recessed bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete all as specified and directed. |
| 43 | S&F in repair floor mounted Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 370x670x720 mm, S Trap- 220 mmor of any type as directed by Engr in charge at site as per site requieremnt complete all as specified and directed. Make : Cera/Hindware/Jaquar/parryware or equivalentas approved by GE. |
| 44 | S&Fin repairvitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including \"P\" or \"S\" trap complete all as specifed and directed.Make : Cera/Hindware/Jaquar/parrywareor equivalentas approved by GE. |
| 45 | S&F in repair PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 46 | S&F in repair CP Bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed foriron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 47 | S&F in repair CP pillar tap, cast copper alloy with crutch orbutterfly handle, screwed down, screwed foriron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 48 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 49 | S&F in repair CP brass Tubular towel rail 20mm dia incl bracket complete all as specified and directed.. |
| 50 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.. |
| 51 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 52 | S&F in repair Corner Glass Shelf (with Bracket) complete all as specified and directed.. |
| 53 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 54 | S&F in repair urinal Spreader complete all as specified and directed. |
| 55 | S&F in repair for Curved shaped urinal partition with frosted glass 10mm thickHeight: 900, Width: 450 |
| 56 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. . Make : Cera/Hindware/Jaquar or as approved by GE |
| 57 | S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete. |
| 58 | S&Fin repairvitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including \"P\" or \"S\" trap complete all as specifed and directed. |
| 59 | S&F in repair vitreous china wash basin, white, flat back, size 550x400 excluding taps, chain and plug and porcelain stopper but including brackets, coupling, bottle trap/waste pipe complete all as specified and directed. |
| 60 | S&F in repair vitreous china one piece counter top wash basin, white, of size 410x410x160 mm / 570x420x195 mm / 615x415x150 mm includingcoupling, bottle trap/waste pipecomplete all as specified and directed. Make : Cera/Hindware/Jaquar/parrywareor equivalentas approved by GE. |
| 61 | S & F in repairVitreous China wash basinwhite with wooden cabinet/vanity type wall hung high moisture resistant with table top base or any type/size or shape as directed at site with waste couplingof CP,waste pipe complete in all aspects complete all as specified and dirtected by Engr-in-Charge.(Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE) |
| 62 | S&F in repair vitreous ChinaSquatting pan \"Orrisa\" pattren size 580x440mm white with integral foot rest complete. |
| 63 | S&F in repair Waste pipe of 1 to 1.5 mtr long complete. |
| 64 | S&F in repair CP Grating 125 mm dia with waste hole or without waste hole |
| 65 | S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mmmm diameter of outlet, all as specified. |
| 66 | Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75 to100 mm complete all as specified and directed. |
| 67 | S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed. |
| 68 | Description all as per item No 67 above but 75 mm dia PVC SWR pipe. |
| 69 | S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 70 | Description all as per item No 69 above but 75 mm dia PVC SWR bends. |
| 71 | S&F for stack iron clamps incl bolts and nuts and securing ends of stays to wall or rooffor 75/100/110 mm bore of pipe complete all as specified and directed. |
| 72 | Hacking out old broken glasses any thickness size, quality or description from wooden frames fixed with putty or with beads complete all as specified and directed. |
| 73 | Hacking out old broken glasses any thickness size, quality or description from metal frame including punching or drilling out old glazing pins/springclipsandprovidingand fixing new ones complete all as specified and as directed. |
| 74 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 75 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in square not exc 0.80 Sqm in each panes fixedcomplete all as specified and directed. |
| 76 | M&L for 5-6 mm thick toughned glass with fittings like nails/rubber seal/aluminium glazing clipsetc of any size shutters/windows/ventilators complete in all aspects as specified and directed. |
| 77 | S & F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 78 | S & F Stainless steel Cutlary basket of size 370mmx485mmx100mm made of min 4mm dia stainless steel wire and bottom of SS perforated sheetor of any size as directed by Engr in charge at site as per site requieremnt complete all as specified and directed. Make : as approved by GE. |
| 79 | S & F Stainless steel thali basket of size 370mmx485mmx200mm made of min 4mm dia stainless steel wire or of any size as directed by Engr in charge at site as per site requieremnt complete all as specified and directed Make : as approved by GE. |
| 80 | S & F Stainless steel basket (plain) of size 370mmx485mmx150mm made of min 4mm dia stainless steel wireor of any size as directed by Engr in charge at site as per site requieremnt complete all as specified and directed Make : as approved by GE. |
| 81 | Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters etc. |
| 82 | M&L for rendering 15 mm thickin cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed. |
| 83 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth withoutusing extra cement on brick/concrete surfaces complete all specified and directed. |
| 84 | Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified. |
| 85 | M&L for preparing New plastered surfaces Wall and applying of Birla/JK white wall care putty approx 2 mm thickon Wall as per manufacturer\"s instruction on existingprepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper overa coat of primer paint on Wall complete all as specified and directed. |
| 86 | M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed . |
| 87 | M&L for Rendering 5mm thickwith water proofing compound incement mortar 1:3on fare faces of brick work or concrete surfaces and finished the surfaceeven and smooth without using extra cement in ceiling/ Chajjas complete all as specified. |
| 88 | M&L for prepration of new plastered surfaces of wall/ Ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces.complete all as specified and directed.(Note : Finishing coat to be applied with roller) |
| 89 | Complete removal of existing treatment of old surface of wall and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. (Note : Finishing coat to be applied with roller) |
| 90 | Complete removal of existing treatment of old surface of ceiling and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint exterior grade over primer complete all as specified and directed by Engineer-in-Charge. (Note : Finishing coat to be applied with roller) |
| 91 | Preparation of old decorated internal wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smoothto recieve further finishes complete all as specified and all as directed. |
| 92 | Applying two coats of oil bound distemper on wall surfaces complete all as specified and directed.(Note : Finishing coat to be applied with roller). |
| 93 | Preparation of old decorated internal ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smoothto recieve further finishes complete all as specified and all as directed. |
| 94 | Applying one coats of Oil Bound distemper on ceilingsurface complete all as specified and directed.(Note : Finishing coat to be applied with roller). |
| 95 | Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 96 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed. |
| 97 | M&L for preparation old decorated external wall surface and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge. |
| 98 | M&L for preparation of chequered tile or PCC or interlocking tiles surface and applying one coat of floor paint of Indigo/Berger/Asian complete all as specified and directed. |
| 99 | Complete removal of existing treatment of old surface of wall/ceiling and applying two coat of Asian paint Smartcare HYDRO LOC or Dr fixit Sure seal or Asian paint Smartcare Dampproof and applying 1mm thick putty with waterproof compound again sanding and appying two coats of acrylic emulsion/OBD (as per site requirment) paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishingover and including 20 mm thick screed bedding in CM 1:6 including dismantling of old complete all as specified and directed by Engineer-in-Charge. |
| 101 | M&L Machine cut kota stone slab flooring 15-18mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishingover and including 10 mm thick screed bedding in CM 1:4 as in riser of steps, skirting, dado and pillar including rubbing ,polishing and also incl dismantling of old complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps(grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment omplete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl dismantling ofexistingroof sheet complete all as specified and directed. |
| 104 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures\"s instructions and fixed with self thread making steel screws of length not less than 50mm incl dismantling of AC sheetcomplete all as specified & directed by engr-in-charge |
| 105 | S&F for 2mm thick fibre glass reinforced translucent plain/corrugated (as directed at site by Engr in charge) sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified. |
| 106 | Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4 and also incl taking down of old stone/concrete tiles complete all as specified & directed. |
| 107 | Providing and laying 60mm thick factory made chamfered edge prepolished cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; incl taking down of old paver block/tiling complete all as specified and directed. |
| 108 | M & L for outdoor coloured ceramic tiles 8-9 mm thick ( square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set and jointedin neat cement slurry and pointed in whiteor coloured cement to match over and incl 15mm thick screed bed CM 1:6 complete all as specified and directed by engr in charge. |
| 109 | M & L for APP polymeric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm of make STP Texsa Ltd /IWL Ltd /MK Petro as approved by GE , black finished reinforced with non woven polyster matt (wt not less than 150gms/ sqm),with fusable finish laid over compatable bitumen primer at the rate of 0.35 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75 mm at the sides and 100 at the ends and sealing incl applying a coat of cold emulsion bituminous primer all as per manufactur\"s instructions incl two coats of aluminium paint above APP membrane also incltaking down existing treatment of any typewith old plaster and and preparation of surface and 15 mmthick cement screed in CM 1:4 on roof of concrete surfaces finished even and smooth without using extra cement with mixing ofwater proofing compoundcomplete all as specified (WPC shall be paid seperately) complete all as specified. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators as approved by GE.Note - a)If Electric fittings/fixtures/conduits/outdoor unit/wirings are encountered on roof the same shall be rerouted before the treatment and fitted back after the completion of roof treatment. Nothing extra shall be paid on this account and the rate shall be deemed to be incl in the quoted rates by the contractor.b) outdoor unit, whenever directed as per site condition, to be fitted on PCC 1:3:6 platform of 30cm x 30cm x 30cm. Nothing extra shall be paid on this account and the rate shall be deemed to be incl in the quoted rates by the contractor |
| 110 | Water proofing treatment to sunkenfloor and verticle comprises the following provisions as under:-(a) After demolition of floor & lime concrete etc removal all loose particle alongwith existing water profing treatment (any No of layer) with wire brushes and cleaning the surface with water.(b) Brushsing cement slurry with 1.2Kg/Sqm of cement duly blended with and including water proofing compound (Make -Dr Fixit). (c) 15 mm thick (average thickness) plastering in CM 1:3 mixed with WPC in sunken surface ,including wall . the corner of sunken portion shall be roounded in concave shape and adequate slope shall bemaintain during plastering to accomodated sump pipe and ponding the sunken portion withwater minimum 48 Hrs .(d) Applying self adhesive type APP base polymeric membrane minimum weight not less than 3.00 Kg /Sqm and mimimum 3mm thick laide over sunken floor and sides fixed with sealing compound at all joint to entire satisfaction of Engineer -in Charge .(MAKE-IWP, STP) (e) Filling the sunken area with Brick bats or PCC 1 :7:12as in lean concrete under floor complete all as specified and directed. |
| 111 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete all as specified and directed |
| 112 | S&F for 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and ETICHING as per design approved by GE complete in all aspects complete all as specified and directed. |
| 113 | S&F Top patch of any type as directed at site of make as approved by GE complete all as specified and as directed. |
| 114 | S&F Bottom Patch of any type as directed at siteof make as approved by GE complete all as specified and as directed. |
| 115 | S&F Top Pivot of any type as directed at siteof make as approved by GE complete all as specified and as directed. |
| 116 | S&F Bottom and Top corner patch lock of any type as directed at site of make as approved by GE complete all as specified and as directed. |
| 117 | S&F Door handle of make as approved by GE complete all as specified and as directed. |
| 118 | M&L for Grinding, polishing /bevelling of edges on 12mm thick toughened glass complete all as specified and as directed. |
| 119 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 120 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight210 gms),complete all as specified and directed |
| 121 | Taking down chowkats or frames with shutters(without taking offshutters from frames) areanot exceeding 1.50 sqm each complete all as specified |
| 122 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4.0 square metre each complete. |
| 123 | Taking downshutters of any description exc 1 sqm n .exc 2 Sqm each complete. |
| 124 | Taking down shutter and refixing in same opening exc1 sqm n exc 2 sqm |
| 125 | S&F for Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl PCC 1:3:6 type C-0 for filling back of frame, complete all as specified and directed by Engr in charge. |
| 126 | S&F for Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed byEngr in charge. |
| 127 | S&F for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 128 | Forming jambs, etc. to openings (to foregoing item),CM 1:6including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 129 | Making good under cills or over arches, lintels and bressummers. Inc cement Mortar 1:6 luding allpinning when necessary |
| 130 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR. |
| 131 | S&F, factory made solid panel PVC door/cup board shutte door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020). |
| 132 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 133 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. |
| 134 | Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 135 | S&Fstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 136 | S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 137 | S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 138 | S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 139 | Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of primer complete all as specified and as directed. |
| 140 | S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 141 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 142 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 143 | S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc |
| 144 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . |
| 145 | S&F Extruded aluminum alloy handle,fabricated type,anodized 125mm size. |
| 146 | S&F Extruded aluminum alloy handle,fabricated type,anodized 150mm size. |
| 147 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 148 | S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. |
| 149 | S&F in repair Door closer hydraulically regulated, aluminum (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. |
| 150 | S&F in repair Rubber door seal 32mm wide with Aluminiumstrip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed. |
| 151 | S & F in repairs stainless steel Curtain Rod 20 mm dia with bracketsfixed with stainless steel screwsand including side finials and bracket/hook for fixing to walletc complete in all aspects as specified and as directed. |
| 152 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished |
| 153 | S&F in repair SS Drawer handles, projection drop (50mm to 65mm) on screwed plate complete |
| 154 | Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning. |
| 155 | Description all as per above item 154.00 here-in-before but width not exc 4.00 m and height not exc 5.00 m. |
| 156 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 157 | S & F bevelled edge mirror of selected quality glass/any size mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 158 | S & F wall mounted looking mirror with cabinet type with storage medium size as directed at site by Engr in charge complete all as specified and directed. Make - as approved by GE |
| 159 | M & L for cleaning of water storage tank500-1000 L capacity and washing with mild detergent or suitable chemical without damaging the existing pipelines incl taking out the water tank and refixing the same after washing (as directed at site by Engr in charge upon requirement) complete all as specified and directed. |
| 160 | M & L for cleaning of water storage tankexc 1000 to 2000L capacity and washing with mild detergent or suitable chemical without damaging the existing pipelines incl taking out the water tank and refixing the same after washing (as directed at site by Engr in charge upon requirement) complete all as specified and directed. |
| 161 | Attending day to day complaint related to welder & black smith/carpeneter/plumber work alongwith helper for the repair to steel windows shutters,grills,doors,rolling shutters/wooden cabinets/plumbing & sanitary works and other related works etc including taking down, easing and refixing in the same position as reqd complete all as specified and directed.Note :- (1) the above task shall be carried out by deploying a min 01 welder having black smith skills/plumber/carpenter on day basis from 0900 hrs to 1700 hrs. (2)In case contractor fails to complete the above task as per scheduled programmea damage of Rs 500/- per day shall be deducted from his payment. 3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine, equipments and safety gear shall be provided by the contractor. 4) All maintenance material/accessories as reqd shall be issued from MES store to complete the maintenance task only ( as decided by Engr in charge) and dismantled old unserviceable item shall be deposited back to MES store yard.(5) The abovework /task will also include forHigh rise bldgs and shaft area of high rise bldgs. |
| 162 | M&L for providing PMMincluding demolition(Polymer modified cementitious mortar) :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 50 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer(v) To be followed by CM 1:4 complete all as specified and directed by Engr in charge. |
| 163 | S&F in repairsinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 164 | S&F in repairsinks with drainage boardmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 165 | S & F in syphon kit for low level cistern of any size as directed at site complete all as specified and as directed. |
| 166 | NOTE - Rates quoted against BOQ item No 1 to 165 shall incl following: (a)The work mentioned in all the items as above may be carried out in multistorey bldg (upto G+8 storey) which may require scaffolding or Jhulla arrangements or any other T&P items which are deemed to be included in the quoted rates by the contractor. (b)All debris obtained from demolition/dismantling the items of any kind or type shall be removed from the site at daily basis or as directed to avoid any seepage/leakage from roof slab or any portion anywhere and deposited the debris out of the MOD land. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
