|
| 1 | Dismantling existing plaster including disposal of refuse as directed by Engineer - in - charge within a distance of 60 meters (200 feet). S.l.No. 706 |
| 2 | 12 mm. Thick plaster with cement mortar consisting of 1 part cement and 4 part of approved coarse sand. Minimum thickness not to be less than 10 mm. Including supply of all materials labour and T&P etc. required for proper completion of work. S.l. No. 584 |
| 3 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer - in charge within a distance of 60 meters (200 feet). S.l. No. 708 |
| 4 | Providing and applying white cement based putty of average thicking 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. DSR item No. 13.80 |
| 5 | Finishing walls with Premium Acrylic smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 litr/10 sqm) DSR item No. 13.47.1 |
| 6 | Painting or varnishing new iron work in small areas or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2n quality synthetic enamel paint of approved brand such as British paint. Shalimar, Asian or equivalent as approved by E/1) or Varnish including supply of all m aterials, labour, T&P etc. erquired for proper completion of the work. Paint ot be used should confirm the l.S.No. 103-1950.S.l. No. 641+642 |
| 7 | S/F of Aluminium door including cost of all material, labour, T&P etc. complete as per direction of E/1. |
| 8 | Plumbring work including cost of all material, labour, T&P etc. complete as per direction of E/1. |
| 9 | Electrification work including cost of all material, labour, T&P etc. complete as per direction of E/1. (Such as wiring, switch board. Plug, bulb etc.) |
| 10 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure graded and compacted to meet requirement of Table 300.1 and 300. 2 as per Technical Specification Clause 301.5 |
| 11 | Construction of granular Sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Techincal Specification clause 401. |
| 12 | Providing and Laying of Grey Color interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 13 | Cast cement concrete as in door sills. Chaukthat. Boundary post and similar small precast unit with cement. Approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1;2:4 (class 150) excluding supply of reinforcement and its bending but including its fixing in position and binding with 24 B.W. G.G.I, binding wire and including necessary centering and shuttering etc. and also including supply of all materials. labour T&P etc. required for proper completion of the work. Binding wire to be supplied by the contractor free of cost S.l. No. 282 |
| 14 | Supply and fixing 6 mm. (1/4\") China white glazed tiles in flooring or in skirting or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry. Jointing and polishing complete, including supply of all materials, labour and T&P etc. required of proper completion of the work. S.l. NO. 628 |
| 15 | Brick Masonry Work in Cement Mortar 1:4 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. |
| 16 | Supply & fixing of Flush Doors commercial quality conforming to l. S. 2202 Part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black japan paint on all iron fitting if necenssary. Fitting with necessary screws to be supplied departementally. S.l. No. 470 (35mm leaf) |
| 17 | Mislenious work |
| 18 | Letter writing |
| 19 | P/F of Sign board. Please Enable Macros to View BoQ information |
