|
| 1 | Double Arch Swing: In this two children can enjoy the swing at one time.The arch shaped side frame is made of 65 mm NB \"B\" Class GI pipe and top pipe is made up of 50mm NB\"B\" Class GIpipe.The frameis powder coatedtogiveanaestheticlook.Theswing is made up of 5mm thick anti skid canvas top. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings shall be mounted inside a specially designednylonc lamp. |
| 2 | DeluxeSlide :Deluxe Slide chuteis made from stainless steel (SS) of 304 grade swith 16S WG sheet.The structure comprises of 20 mm NB and 25 mm NB\"B\" Class GI pipe. The centresupportismadein80mmNB\"B\"ClassGIpipeand15mmNBGIpipe.The ladder cum railing is made up of 20mm NB and 25mm NB \"B\" Class GI pipe. The platformismadeupof14SWGAluminiumsheetswithantiskidforfirmfootgrip.There are triangular steps of 16 SWG sheets. The chute has its end such as it causes safe landingofthechild.Thepipesarepowdercoatedtoavoidrusting. |
| 3 | Providing and Fixing of FRP wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5\" Ground Level and should be made by 32mm NB and 25 NB and 20mmNBpipeMSpipe.Slidelength10\"allcomponentspaintbyPUpaintinmulti colours. |
| 4 | Spiral Slide : The chute of the Spiral Slide is made of FRP (Fibre Reinforced Plastic) having thickness of 4mm. Slide centre support shall be 80mm NB \"B\" Class GI pipe. Landing module shall be supported by 20mm NB \"B\" Class GI pipe. Slide extension platformismadefromFRP(FibreReinforcedPlastic).Theladdermainframeis25mm NBGIpipe.Therailingshallbemadefrom15mmNBand20mmNB\"B\"ClassGIpipe. All pipes are powder coated to avoid rusting. |
| 5 | DoubleSeeSaw:Providingandfixingofdoubleseesawofheight0.5mtrfromground level.Seatframeandbaseshouldbemadewith50mmNB‘B’ClassGIPipe.Handle pipeshouldbe25mmNB‘B’classGIpipe.Lengthofseesawlevershouldbe6feet. Seats are made with FRP/LLDPE. Max. 4 children can play at one time. |
| 6 | Merry Go Round : Specification : Central Pipe : 100 mmStructure : 32 mmPlatform : GI Sheet Dia. : 4 FeetStructure should made with GI pipe only |
| 7 | CYCLE : Dimensions :- 1570mm (Length) x 570mm (Width) x 900mm (Height)Safe Area :- 2.5 Mtr x 1.5 MtrCycle equipment made from \"B\" class G.I. pipe of different NB (NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters)The main frame of 50 NB made from \"B\" class G.I. pipes.M.S. round plate of Ǿ 300mm & 10mm thickness used to form a paddle assembly.The handle frame is of 25 NB made from \"B\" class G.I. pipe.The seat and back rests are fitted on the outer frames are made up of M.S. sheet of size 330mmx300mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges.The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"B\" class welded with M.S. round plate of Ǿ 250mm & 10mm thick main pipe supported with 25x25mm M.S. angles of 3mm thickness and 20mmx40mm CRC square pipes of 3mm thickness.Closing caps are made up of injection mounlded plastic LLDPE/HDPE.Pins used of Diameter 25mm are made up from SAE 8620 bright material.Pins used of Diameter 13mm are made up from ENB material with CRCA pipe 20x20mm of thickness 3.00mm for paddle assembly.The bearing used are 6001zz & 6205zz permanent lubricated sealed sealed bearing of reputed brand.High tensile steel with galvanized nuts and bolts are used for assembly. The circlip used for assembly are of A24 type.The powder coating done with pure polyester powders from Ackzonoble or berger paints with 60 to 70 micron thickness. |
| 8 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. (2.4) |
| 9 | Cement Concrete Grade M-15 and above and PCC blocks (2.4.2) |
| 10 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. (4.2) |
| 11 | In all type of soil (4.2.1) |
| 12 | Providind & Fixing of G.I. Pipes Complete with G.I. Fitting including trunching & refelling etc.external work :- |
| 13 | 50 mm Dia nominal (34.12.6) |
| 14 | Providind & Fixing of Gun Metal Gate valve with ci wheel of approved quality (screwed end) |
| 15 | 40 mm Dia nominal (34.17.3) Please Enable Macros to View BoQ information |
