|
| 1 | Civil Items |
| 2 | Dismantling wall, RCCand other works wherever required as per the directions of the engineer-in-charge |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge |
| 4 | Providing and fixing 1st quality ceramic/vitrified glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including spacer joint of 3-4mm, pointing in white cement mixed with pigment of matching shade complete |
| 5 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge |
| 6 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications |
| 7 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry /Concrete surface including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge |
| 8 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge |
| 9 | Manufacturing supplying and fixing storage Cabinets with workstations/ storage cabinets for medical recordsof 0.45-0.60m deep using 25mm thick vinyl bonded water proofISI marked Plywood/block board, shutters all-round, ward robe, lockable drawers with sliding channels, cupboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm x 6mm thick plain teak wood beading, lipping 1.5mm thick commercial ply vertical support finished in approved 1mm lamination sheet of approved colour, shade and quality on all exposed surfaces. Inner surface finished with 0.8mm lamination sheet of approved shade and quality including cost of brass fittings, approved brand parliamentary/box hinges , Stainless Steel handles, Stainless Steel tower bolts, magnetic catches, approved brand lock, approved brand adhesives, synthetic resins, nails, screws etc.,complete including cost of all materials, labour charges, complete as per specification |
| 10 | Providing and fixing wall paneling, over 25mm thick ply wood frame work affixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed overply of approved brand, termite and water resistant, finished with melamine polish, pinup board where ever required complete including cost and conveyance of all materials, labour for all items of work HOM etc., complete as per specification |
| 11 | Providing, fabricating, assembling and fixing in position aluminium doors using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section114.3x44.45 thickness 3.18mm, section weight2.646kg/m, door central section49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonryon sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames thoroughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM complete as per specifications |
| 12 | Providing and fixing toughened glass 12 mm thickness with hole where ever required of approved shape and including cost of materials, fixtures, labour and HOM complete as per specifications |
| 13 | Making electrical connection/Network connection/Telephone connection to work stations and providing lightings to wall panelingwith necessary electrical fittings and fixtures including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge |
