|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2x1.5 Sqmm +1x1.5 Sqmm |
| 3 | b) 2x4 Sqmm +1x4 Sqmm |
| 4 | Supplying and fixing of following module, PVC enclosure along with modular base & cover plate for modular switch in recessetc as required (a) 3 module |
| 5 | b) 6 Module |
| 6 | Supplying and fixing following accessories in the existing Modular enclosure including connections etc as required a) 6/10 A 1 way modular switch |
| 7 | b) 6 A modular Socket Outlet |
| 8 | c) 15 A 1 way modular switch |
| 9 | d) 15 A modular Socket Outlet |
| 10 | e) Fan Regulator stepped |
| 11 | Supplying and fixing PVC batten/ angle holder including, connection etc. as required |
| 12 | Supplying and fixingLED type 4 ft light fitting of20 Watt, 230V, 50HZ,including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Crompton/Havells or SS make) |
| 13 | Supplyingof ceiling fan 1200 mm sweep, suitable for 230V, 50 HZ, ac supply and installation, testing and commissioning ofthe same includingdisconnecting all electrical connections and dismantling the existing fan, connectionsetc. as required (Make M/s Havells/Anchor or SS make) |
| 14 | Supplying & fixing of exhaust fan 300 mm sweep, with 900 rpm, 230V, 50Hz,including making openings on walls and properly fastening with fastners and GI strips , i/cmakingconnection, testing, commissioning, sealing the leaks for preventing entry of rain water, etc. as required. ( MakeHavells or SS) |
| 15 | Supplying & fixing of fancy bracket ( Wall sconce light) suitable for working on 230V 50Hz AC supply, fixing etc as reqd.(excluding bulb) |
| 16 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 12 Way SPN Double Door |
| 17 | Supplying and fixing 2 pole Isoaltor 230V, 63 A, in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 18 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 19 | S/Fixing of SP&N enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10 A - 20 A SP/DP MCB, i/c connection complete as reqd |
| 20 | Supplying of PVC insulated and sheathed armoured 2 core 6 sq.mm aluminium conductor 1.1 KV grade cable and laying the same on surface or in recess as reqd.(ISI mark). |
| 21 | Supplying and making end termination with brass compression gland for PVC insulated and sheathed copper conductor cable of 1.1 KV grade of size 2 core 6 sq.mm as reqd. |
