Tender For Annual Maintenance Contract For The Institute Building Including Civil, Carpentry, Sanitary Etc., At Csir-Nio, Dona Paula, Goa., Goa-Goa

TDR : 52963313

Tender Notice
BOQ

5 Days Left

Goa , Goa

Tender Brief : Tender For Annual Maintenance Contract For The Institute Building Including Civil, Carpentry, Sanitary Etc., At Csir-Nio, Dona Paula, Goa.

Document Fees
₹ 1000 /-

EMD
₹ 129795.0 /-

Tender Value
₹ 64.89 Lakhs /-

Submission Date
24-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation ,pipeline,trenches drain (notexceeding 1.5m in width or 10sqm on plan) including dressing of sides,ramming of bottoms lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.
2	All kinds of soil
3	hard rock where blasting prohibited
4	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
5	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
6	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
8	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
9	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) a)In foundation and plinth
10	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)
11	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
12	Centering & shuttering including strutting proping etc. and removal of form for. Foundation, footings, bases of columns etc. al Columns, pillars, posts and struts .Sides & soffits of beams, beam haunchings, cantilever, lintels , plinth beams not exceeding 1m in depth, Staircase ( except spiral staircase ), Suspended floors, roofs, landings, shelves & their supports balconies and chajjas upto floor two level
13	Providing and laying in position (1:1 1/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement :1 1/2 coarse sand:3 graded stone agg 20mm nominal size)
14	All works upto plinth level
15	in beams,suspended floors,roofs having slope upto 15*landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases upto floor five level
16	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
17	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
18	Providing & appying white cement (Make:-JK white/Birla)
19	12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)
20	6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
21	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough withsponge
22	Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as perspecifications and direction of EngineerIn-charge complete in all respect.SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
23	Providing and injecting approved grout inproportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. Epoxy injection grout in concrete/RCC work of approved make.
24	Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust freesteel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In Charge.
25	Laterite masonry in neatlydressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement: 4 coarse sand in foundation uptoplinth level
26	Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
27	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick
28	Providing 25 mm th. Cuddapah slab machine cut & polished on either side in partitions including making necessary grooves in the wall & fixing with cement mortar,complete as directed by the engineer in charge.
29	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
30	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
31	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser ofsteps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
32	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile 600x600 mm
33	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS :15477, in average6 mm thickness, including grouting of joints(Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.) Size of Tile 600x600 mm
34	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
35	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
36	Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand)Dark shade pigment using ordinary cement.
37	Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge
38	Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete, without door:75 mm dia.
39	Providing and fixing 10 litres pvc. Automatic flushing cistern with fittings.
40	Providing & fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching and refilling etc.(external work)(high density):
41	25mm nominal bore
42	32mm nominal bore
43	40mm nominal bore
44	50mm nominal bore
45	Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)
46	20 mm dia.
47	25 mm dia.
48	32 mm dia.
49	40 mm dia.
50	50 mm dia.
51	Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
52	Providing and fixing CP brass Fancy TWO WAY LONG BODY BIB Cock WITH WALL FLANGE Jaguar make or equivalent. a) 15mm nominal bore with all fittings complete
53	Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 : 15mm nominal bore
54	Providing and fixing CP brass 3 way Laboratory tap/cock of approved make including fittings. 15 mm nominal bore.
55	Providing and fixing Foot Valve with SS Mesh of approved make including fittings. 25 mm nominal bore.
56	Providing and fixing Foot Valve with brass strainer of approved make including fittings. 80mm dia.
57	Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms
58	Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : Size 450x300x150 mm
59	Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms each 180.80
60	Providing and fixingbrass stop cock (heavy) of approved quality
61	15 mm nominal bore
62	20mm nominal bore
63	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
64	Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour.
65	a) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
66	b) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
67	Providing and fixing 100 mm sand cast Iron grating for gully trap.
68	Providing and fixing vitreous china wash basin with RS or C.I.brackets painted white, 15 mm C.P. brass piller taps C.P.brass chain with rubber plug 32 mm C.P.brass waste of pattern,32 mm dia.M.I.or C.P.brass trap and union complete ,incuding cutting and making good the walls where required.Flat back wash basin size 630×450 mm with a single 15 mm C.P.brass pillar taps.
69	Providing and fixing C.P.brass shower rose with 15 or 20 mm.Inlet:100 mm dia.
70	Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms
71	Providing and fixing CP brass Urinal valve autoclosing system with built in control cock of approved make including fittings.
72	Providing and fixing CP brass Urinal valve concealed autoclosing system with built in control cock of approved make including fittings.
73	Providing and fixing P.V.C.connection pipe with brass union 20 mm nominal bore:
74	30cm(12\") length
75	45cm(18\") length
76	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 40 mm dia
77	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions
78	Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
79	Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
80	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. Overall size 610mmx460mm (24\"x18\") bowl size 560mmx410mmx215mm (22\"x16\"x81/2\") Glossy. 1.0mm thk
81	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
82	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
83	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
84	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
85	Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
86	Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm
87	Providing & fixing Stainless Steel towel rail complete with SS screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail
88	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
89	a) 15mm dia nominal bore
90	b) 20mm nominal bore
91	c) 25mm nominal bore
92	d)32 mm nominal bore
93	e)40 mm nominal bore
94	f)50 mm nominal bore
95	Providing & fixingGI pipe complete with GI fittings including trenches & re-filling etc.(external work)
96	a) 15mm nominal bore
97	b) 20mm nominal bore
98	c) 25mm nominal bore
99	d) 40mm nominal bore
100	e) 50mm nominal bore
101	f) 80mm nominal bore
102	Providing and fixing brass bib cock (heavy)of approved quality a) 15mm nominal bore
103	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
104	Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
105	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
106	a) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
107	b) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms
108	c) 25 mm nominal bore, 152 mm long, weighing not less than 440 gms
109	Providing & applying Portland Cement (OPC-43 Grade)
110	Cement Polymer Grout Compound
111	Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)
112	65 mm nominal bore
113	80 mm nominal bore
114	Providing & fixing upvc ball valve of approved quality.
115	15mm nominal bore
116	20mm nominal bore
117	25mm nominal bore
118	32mm nominal bore
119	40mm nominal bore
120	50mm nominal bore
121	Providing & fixing 600x450 mm bevelled edge mirror of superior glass (of approved. Quality) completefixed to wooden cleats with C.P.brass screws and washers complete.
122	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
123	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
124	20 mm nominal bore, weighing not less than 40 gms
125	25 mm nominal bore, weighing not less than 62 gms
126	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings and fixing the pipe with clamps at 1.00mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
127	15 mm nominal outer dia.pipes
128	20 mm nominal outer dia.pipes
129	25 mm nominal outer dia.pipes
130	32 mm nominal outer dia.pipes
131	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
132	15 mm nominal outer dia.pipes
133	20 mm nominal outer dia.pipes
134	25mm nominal outer dia pipes
135	32mm nominal outer dia pipes
136	40mm nominal outer dia pipes
137	50mm nominal outer dia pipes
138	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as perstandard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
139	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
140	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.
141	Single socketed pipes 75 mm dia
142	Single socketed pipes 110 mm dia
143	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
144	Single pushfit Coupler 75 mm dia
145	Single pushfit Coupler 110 mm dia
146	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
147	75 mm
148	110 mm
149	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
150	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipeetc. complete :
151	25 to 40 mm nominal bore
152	50 to 80 mm nominal bore
153	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
154	Providing brass full way valve (heavy) duty with wheel of approved quality:
155	a) 25mm nominal bore
156	b) 32mm nominal bore
157	c) 40mm nominal bore
158	d) 50mm nominal bore
159	e) 65mm nominal bore
160	f) 80mm nominal bore
161	Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation
162	Removing and refixing of door/ window shutters paneledor paneled and glazed including replacing of existing hinges, chiseling etc complete as directed by Engineer- in – charge ofany size
163	Providing & Fixing of Aluminium Lay-in Perforated Tile Ceiling on 24 /14 mm ‘T’ Framework of module 600mm x 600mm. Tiles ofsize 575mm X 575mm / 584mm x584mm madeout of 0.6mm thick Aluminium. Perforation ofthe tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling. The tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. The Tile shall be Polyester based, powder coated in whitecolour. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main tee runners shall be suspended at an interval of1200mm centre to centre. The 24 /14 mm crosstee runner shall be suspended at 600mm centre to centre and further supported with 24 /14 mmcross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm G.I. rod from slab/roof. The suspension shall be provided at1200 to 1500mm centre to centre. Tee framework would be made of GI and Powdercoated. Acoustic Felt: Non-woven felt made ofglass-reinforced fibre glued over the perforationfor sound absorption.
164	Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with sliding shutters using 18 mm series shutters section. 4mm thk plain float glass specification 1 outer frame shall be of aluminium rectangular tube of 63mmx 37mm x1.2mm @ 0.635kg/m 2. 2 track bulb with gutter [email protected]/m 3.two track plain on top and side [email protected]/m 4. Shutter top & bottom .2mm@ 0.428kg/m5. Lock interlock section 40x18x1.2mm @0.512kg/m 6. Handle section 40x18x1.2mm @ 0.428kg/m Jindal/Hindalco Plain glass
165	Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: fixed windows using 18 mm series shutters section.Plain plate glass
166	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters. Acrylic sheetincluding powder coating with pure polyester powder of shade of required colour on the aluminium section.
167	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters. Plain plate glassincluding for powder coating with pure polyester powder of shade of required colour on the aluminium section.
168	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions. Plain plate glassincluding powder coating with pure polyester powder of shade of required colour on the aluminium section.
169	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions. Acrylic sheetincluding powder coating with pure polyester powder of shade of required colour on the aluminium section.
170	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation,scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section.Including powder coating with pure polyester powder of shade of required colour on the aluminium section.
171	a)Acrylic sheet/Particle board
172	b)Plain glass 5mm
173	Providing and fixing of mortice 100mm brass chrome coated lock with one dead bolt of approved quality with necessary screws etc complete for Aluminium doors.
174	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-charge. With stainless steel cover plate minimum 1.25 mm thickness.
175	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
176	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
177	125x75x4mm
178	100x75x4mm
179	75x45x3.2mm
180	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
181	200x10mm
182	150x10mm
183	100x10mm
184	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
185	125mm
186	100mm
187	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
188	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
189	Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
190	125×70×4 mm (ordinary type)
191	100×70×4 mm (ordinary type)
192	75×40×2.5 mm (ordinary type)
193	50×40×2.5 mm (ordinary type)
194	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
195	150x10mm
196	100x10mm
197	200x10mm
198	Providing and fixing bright finished brass handles with screws etc. complete:
199	100mm
200	125mm
201	Providing and fixing bright finished brass door latch with necessary screws etc. complete :
202	300×16×5mm
203	250×16×5mm
204	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)
205	Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.
206	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
207	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
208	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm
209	Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
210	Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.
211	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete : 2nd class teak wood50 x 20 mm
212	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self drivenself tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer\"s specification and direction of Engineer in-charge. Decorative finish (wood grained finish)
213	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
214	Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600. Upto 5 mm depth and 5 mm width
215	Providing of Weather Silicon sealant.
216	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats)
217	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
218	Polishing on wood work with ready made wax polish of approved brand and manufacture :Old work
219	Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).
220	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
221	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cementprimeronwallsurfacehaving VOC content less than 50 grams/litre
222	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
223	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
224	Applying primer coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
225	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
226	Polishing on wood work with ready made superior qlty. Wax polish of approved brand and manufacture on new work
227	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : Newwork(twoormorecoats)overandincludingwater thinnable priming coat with cement primer having VOC content less than50 gram/litre
228	Wallpaintingwithacrylicemulsionpaint,havingVOC(VolatileOrganic Compound)contentlessthan50grams/litre,ofapprovedbrandand manufacture,includingapplyingadditionalcoatswhereverrequired,to achieve even shade and colour. Two coats
229	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre ofapproved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
230	Providing and Applying two coats of smartcare damp proof. First coat application by mixing it in water with 30% dilution. Second coat applied without dilution after drying of 4-6 hours, including scaffolding, all materials, manpower, tools, complete as directed by the Engineer in-charge.
231	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspectionof work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
232	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
233	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m. Lead
234	Dismantling tilework in floors and roofs laid in cement mortar including stacking material within 50m lead for thickness of tiles 10mm to 25mm
235	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge. In cement mortar
236	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
237	Of area 3 sq. metres and below
238	Of area beyond 3 sq. metres
239	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
240	Labour charges for engaging on daily wage
241	a) Helper
242	b) Plumber/Fitter
243	c) Carpenter
244	d) Mason
245	e) Painter

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Goa Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Maintenance Contract For The Institute Building Including Civil, Carpentry, Sanitary Etc., At Csir-Nio, Dona Paula, Goa., Goa-Goa

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Maintenance Contract For The Institute Building Including Civil, Carpentry, Sanitary Etc., At Csir-Nio, Dona Paula, Goa., Goa-Goa

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us