|
| 1 | Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete. |
| 2 | Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cementconcrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres :Dismantling Brick / Tile work :In cement mortar |
| 3 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with1:4 cement mortar(1 cement and 4 course sand)including carriage of bricks upto work site, curing etc all complete. |
| 4 | 12mm thick Cement Plaster :1:6 Mix. |
| 5 | Providing and Providing and painting with plastic Emulsionpaints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete |
| 6 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry |
| 7 | Providing / Fitting / Fixing Gypsum board ceiling having composite thickness of 67mm consisting of frames and double skin 8.5mm thick glass reinforced gypsum (GRG) board manufactured by spray suction technique with high strength plaster of paris confirming to IS 8272 i/c providing and fixing frame works made of special section power pressed MS sheet and galvanized with Zinc coating of grade 175and consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm width 0.50 m thick fixed to floor/ceiling at spacing 610 mm centre to centre by 6mm dia. bolts and nuts to both ends of ceiling (hang on truss)/ partition fixed on wall with rawl plugs) at the spacing of 450mm c/c and fixing of GRG boards toeither frame work by 20mm long drive screws on studs, floors, Ceiling channel spacing of 300mm c/c i/, join paper tapes i/c two coats of primer suitable for GRG board as per manufacture specification |
| 8 | Providing and fixing to existing door shutter 35 mm thick Glass Fibre Reinforced Polyester (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of seasoned wood inside at required placed for fixing and fittings, cast monolitically with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856-2000 including fixing to frames. |
| 9 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. : 32mm |
| 10 | Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS733 and IS 1285, fixed withrawl plugs and screws or with fixing clips or with expansion hold fastenersi/c necessary filling up the gap sat junctions,at top,bottom and sides withrequired C/neoprene felt,etc.Al.section shall be smooth, rustfree, straight,mitered and joined mechanically wherever requiredi/c cleatangle,Al snap beading forglazing/paneling CP brass/ stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge. |
| 11 | Providing and fixing glazing in Al.doors and windows ventilaor shutters and partition setc.withPVC/neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 12 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 13 | Providing and fixingprelaminated sheet three layer medium density (exterior grade) particle board grade-I type-IIconfirming IS 12823 bonded with phenol formaldehydesynthetic resin of approved brand and manufacturein panellingfixed in Aluminiumdoors, wndows, shutters and partitionframes with CP brass/stainless steel screwsetc.completeasper architectural drawings and direction of Engineer-in Charge. |
| 14 | Providing and fixing European One Piece 67x 35x75cm Cat no:92072(padestal) HINDWARE or equivalent, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 15 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CPrass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE:One wash basin with one pillar cock.: (63 cm x 45 cm) |
| 16 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete |
| 17 | P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. : 610 x 450 x 200 mm. |
| 18 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL): Angular Stop Cock 15 mm Dia. |
| 19 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) : Bib Cock 15 mm Dia. |
| 20 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete.: 150x31x4mm |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixing thepipe with clamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cement and the costof cutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes |
| 22 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) : Bib Cock Long body 15 mm Dia. |
| 23 | Providing and fixing Tower bolt 200x100mm with necessary screws etc complete.:MS |
| 24 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete.M.S |
| 25 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.:Size 300x16mm:M.S (Bright Finish) |
| 26 | Providing, fitting and fixing. handles 75mm size with necessary screws etc complete.:MS |
| 27 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.:MS |
| 28 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.(Size -600x450mm) |
| 29 | Providing, fittingof chromium plated soap dish with necessary screw etc all complete. |
| 30 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.740 x 20 mm |
| 31 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 32 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on old surface |
| 33 | Cement Concrete: (cast in situ):Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.: 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 40mm & down size) |
| 34 | Providing, Fitting and fixing GI pipe (HEAVY DUTY), (excluding trenching, refilling, compacting and the cost of fittings) all complete: 150 mm dia G I pipe |
| 35 | Enamel Paints Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface. |
| 36 | Providing and painting one or more coats on rain water, soil waste,vent pipe sand fittings with anti-corrosive bitumen paint including cleaning of dirt, dust etc complete on old surface. 100mm dia |
| 37 | Providing,fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5ltr automatic flushing cistern with C.I.brackets,GI flush pipe and spreaders with brass union s and G.I.clamps including cutting and making good the walls and floor sas require dall complete: Range of 1 Urinal basin. |
| 38 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent ) : 1000 LITERS CAPACITY |
| 39 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer in- Charge. : With cement mortar 1:4 (1 cement : 4 fine sand) |
| 40 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 41 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below each |
| 42 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete |
| 43 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. :Glazed Vitrified tiles Matt/Antiskid finish of size (Size of Tile 600 x 600 mm or more |
| 44 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. |
| 45 | Providing and fixing bright finished brass helical door spring (superior quality |
| 46 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia |
| 47 | Supplying of recessed LED fitting 15 watts |
| 48 | Wiring for light/Fan/Call bell & 6A plug point with 2x1.5 sq mmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sq mm HR FRLS PVC insulated copper conductor single core cable as required. |
| 49 | Wiring for 16A plug pointwith 2x2.5 sq mmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sq mmFRLS PVC insulated copper conductor single core cable as required. |
| 50 | Wiring for sub-main for light/fan/call bell & 6 amps plug pointwith 2x2.5 sq mmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sq mmFRLS PVC insulated copper conductor single core cable as required. |
| 51 | Wiring for sub-main for 16 amps (2x1000) plug points with 2x4.0sq mmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x4.0 sq mmFRLSH PVC insulated copper conductor single core cable as required. |
| 52 | Supplying and fixing1 no.16Amps socket & 16 amps switch,white plate(4 module)&Metal fux box(4module)including connection etc as required |
| 53 | Supplying and fixing1no.6Amps socket with 1no.6amps switch,1 no.3 module white plate & 1no3module metal flux box)including connection etc as required. |
| 54 | Supplyingof wall mounting fan18 \" |
| 55 | Supplying and fixing 1 way FT switch 8 no .06 amps FT switch with 1 nowhite 8 moduler plate and 8 moduler metal flux box. |
| 56 | Supplying and fixing 1 way FT switch 6 no .06 amps FT switch with 1 nowhite 6moduler plate and 6 moduler metal flux box. |
| 57 | Supplying, installation,testing & commissioning of Ventilating Fan 250mm including connection as required |
| 58 | Supplying of Heavy Duty Exhaust Fan 18\" |
| 59 | Supplying and fixing 1 no. 06 amps socket with 1 no. 06 amps switch,1 no. 3 module white plate & 1 no. 3 module metal flux box including connection etc as required. |
| 60 | Supplying and fixing 1 way FT switch 1 no .06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 61 | Supplying, installation,testing & commissioning of Isolator Double pole 63 Amps |
| 62 | Supplying and Fixing LED wall mounting mirror light including connection etc. as required |
| 63 | Supplying and installation of MCB distribution board Single Door 8 ways SPN(Single door) |
| 64 | Supplying and installation of MCB distribution board Single Door 12 ways SPN(Single door) |
| 65 | Supplying of Double Pole 6-32 amps |
| 66 | Supplying of Fan Step Regulator 100w 2 module |
| 67 | Supplying of Metal flux box (4 module) |
| 68 | Supplying of white plate with frame (4 module) |
| 69 | Supplying of Metal flux box (8 module) |
| 70 | Supplying of white plate with frame (8 module) 4x2 |
| 71 | Supplying of Metal flux box (12 module) |
| 72 | Supplying of white plate with frame (12 module) |
| 73 | Supplying of switch 06 amps 1 way 1 module |
| 74 | Supplying & Fixing calling bell (Ding-Dong) with 100mm x 150mm sunmica box including connection etc as required |
| 75 | Bell Push 06 amps 1 module |
| 76 | Supplying of socket 6/16 amps 2 module |
