|
| 1 | Taking downcementplaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 2 | M&L for rendering10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed |
| 3 | M&L for 15 mm thick rendering in cement plaster 1:4 on fair face of brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) incl mixing with integral water proofing compound complete all as specified and directed. Note:-Integral water proofing compound will be measured and paid separately. |
| 4 | Supply only Integral water proofing compound complete all as specified and directed. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 6 | M&L for preparing of newly plastered surface of walls and applying one layer of white putty 1-2 mm and two coats ofoil bound distemper over a coat of compatible primer etc complete all as specified and directed. |
| 7 | M & L for preparingold or unplastered surface ofceiling and applying two coats of white wash on ceilings complete all as specified and as directed. |
| 8 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B0 12.5mm graded aggregate complete |
| 9 | Taking down chowkhats or frame exc 1 sqm n exc 2 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 10 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately), suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of frame size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. suppling & fixing in opening as per specification & drawing complete |
| 12 | S&F for 150 mm Aluminium handles, cast type,anodised, complete all as specified and directed |
| 13 | S&F 150 mm Mild steel barrel towerbolts, stove enamelled black, with bright bolt and fixed and fixed complete all as specified and directed. |
| 14 | S&F 100 mmButt hinges, extruded brassISI marked, compound complete all as specified and directed. |
| 15 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedcomplete all as specified and as directed. (minimum thickness of powder coating 50 micron) |
| 16 | Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/shutter, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 17 | S&F for Sheet glass 4 to 5mm thick, tinted ordinary quality for fixing in window or where required complete all as directed |
| 18 | M&L for granite (any type) 18-20 mm thick machine cut in steps, jambs, cooking platform , window cills and similar worksincluding 15mm thick screed bed in CM 1:4and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcuing grinding and polishing types completeall as specified and directed. |
| 19 | Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 20 | M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 21 | M&L for 15 mm thick rendering over fair face or other than fair face brick or concrete surface in cement plaster 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 22 | M&L for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door/window frames and in bed blocks etc complete all as specified and as directed. |
| 23 | Dismantling of stone slabs and tiles of any description or thickness in floors & aprons etc laid over bedded and pointed in any mortar complete all as specified and directed. |
| 24 | M&L for coloured tiles in vertical surface450X300X7mmthick set and jointed over and including 10 mm thick rendering even and rough in CM 1:3 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 25 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick joint free, (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15 cm in CM (1:6) complete all as specified and directed. |
| 26 | M&L forvitrified ceramic tiles of light shade 8 to 10 mm thick (square/rectangular) of size 600 mm x 600 mm as in floors/skirtings etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed. |
| 27 | M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as sub base floor complete all as specified. |
| 28 | S&F in repairs vitreous china wash down water closet 1st qualitywith seat cover and trap incl connection to drain pipe or outgoing pipe and flushing pipe etc complete, waste pipe,sheet covers & fittings (complete set)and fixing complete all as per manufacturer instructions and as directed by Engr-in-Charge. |
| 29 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern\", size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe, traps etc complete fittings and making good to floor including removing rubbish all as specified and directed. |
| 30 | S&F in rpr Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 31 | S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 32 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed. |
| 33 | S&F in repairs Toilet paper roll holder chromium plated fixing complete all as specified and directed by Engr in charge. |
| 34 | S&F in repairssize of approx 450x600mm looking mirror approved quality with wooden back and edge beading, complete with polishing fixed with screws to wall, complete all as specified and directed. |
| 35 | S&F in repairs chromium plated/SS grating square slit 100 mm dia with or without waste hole complete all as specified and directed. |
| 36 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mmfixing complete all as specified and directed by engr in charge. |
| 37 | M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75 mm bore complete all as specified and direcetd. |
| 38 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore fancy type complete all as specified and directed r all as specified and directed. |
| 39 | S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 40 | S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 41 | S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut, screwed down, screwed for iron pipe or union complete as specified and directed. |
| 42 | Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 43 | Supplying and laying20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 44 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 45 | Supplying and laying16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 46 | M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 75/110 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified. |
| 47 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed/ laid in trenches/floors with nahani or gully or multi junction or reducers etc trapin floors/walls fixedcomplete all as specified and directed. |
| 48 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed in walls / laid in trenches/floors (with nahani or gully etc trap while laid in floors) fixed with MS clamp complete all as specified and directed. |
| 49 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)(unreinforced)complete all as specified and directed. |
| 50 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 51 | S&F inrepairs 15 mm SS Pillar taps of long body any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) fixed all as specified and directed. |
| 52 | S&F in rpr for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm45gms/40mm-60 gms) incl waste pipe incl all complete fitting all as spd and directed |
| 53 | S&F in rpr for Urinal spreader of SS for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed. |
| 54 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 55 | Material and Labour for Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and as directed. |
| 56 | Matrial and Labour for Cement Concrete 1:2:4 Type B-0 (12.50 mm Graded Stone aggregate in padding, finishing surface concrete topping even and fair (without using extra cement) of average thickness 40 mm in slope as required over roof complete all as specified and as directed. |
| 57 | Material and Labour for 10 mm thick Plastering in CM 1:4 on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down and complete removal of existing treatment of any type. WPC will be measured separately. |
| 58 | Supply only liquid waterproofing compound ISI Marked all as specified and as directed. |
| 59 | Material and Labour for Applying evenly two coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over and Including a coat of Bituminuous Primer at a rate of 1 Kg/Sqm or as per manufacturer\"s instructions complete all as specified and as directed. |
| 60 | Material and Labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 61 | Material and Labour for Preparation of newly laid APP membrane roof treatment over 10 cm width or girth and applying two coats of aluminium paint complete all as specified and as directed. |
| 62 | Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as spd and directed. |
| 63 | M&L for 100 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as sub base floor complete all as specified. |
| 64 | M & L for sand filling under floors or in fdn including watering and consolidation as in bedding layers for laying tiles. |
| 65 | M&L for factory made Machine pressed precast concrete interlocking paver blocks any shape and size confriming to IS 15658-2006 of 60mm thickness coloured chemically treated PCC (ISI Marked ) M-35 grade of desgin & pattern approved by GE as in footpath and filling of joints with Narmada fine sand complete all speciified and directed. |
| 66 | S&F in repairsProviding precast cement concrete Type B0 (1:2:4), (12.50mm aggregate)Set in cement mortar 1:4, louvres and jallies, 50mm thick(measured solid), in cluding all mould- ings complete all as directed. |
| 67 | M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection and similar worksfinished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 68 | Taking down carefully copper/aluminium point wiring from woodenbattan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc ) and making good disturbed surfaces of walls, floor etc. |
| 69 | Taking down old DBs includingexisting MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed by EIC.. |
| 70 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed by EIC.. |
| 71 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall& including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray/white colour also including porvision of earth wire PVCinsulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as specified and directed by EIC. |
| 72 | One light/fan point controlled by one way switch ( switch to be measured and paid separtely) |
| 73 | -ditto- as above item No 71.00 but Same board. |
| 74 | M&L in replacementswitch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by EIC. |
| 75 | M&L in replacementswitch Modular type 6 Amps 2 Way,1 module, 230V AC complete all as specified and directed by EIC. |
| 76 | M&L ceiling rose 3terminalPVCpolycorbonate,isolated body complete all as directed by EIC |
| 77 | Supply and fix LED batten luminaire surface mounted ,4 feet system wattage 20 Watts with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection 2.5KV , IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker freeandincluding connecting up with PVC sheathed suitable sizecopper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings completeallas specified and directed by EIC.. |
| 78 | S&F 25W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarieshould more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire is IP:66 protected.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision ofsuitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed by EIC.. |
| 79 | Supply and fixing Ventilating Fan250 mm sweep, 900 RPM, non metallic resin body,single phase 230 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and directed by EIC. |
| 80 | M&L distribution board SPN4 way with 200 Amp rated bus bar double door complete all as directed by EIC |
| 81 | Supply and fix amp rating 240V 10 KA\"B\" curve MCB SPN 32 A current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC. |
| 82 | Supply anf fix amp rating 240V 10 KA\"B\" curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC. |
| 83 | M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 3 core complete all as directed by EIC. |
| 84 | Excavation in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cables,GI/CI pipe lines etc getting out including forming bottom surfaceto required level and gradient in hard/dense soil complete all as specified and directed BY EIC. |
| 85 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm inhard/dense soil. complete all as specified and directed by EIC. |
| 86 | Removing excavated material/soil to a distance not exceeding 50mand depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directedby EIC |
| 87 | M & L for sand cushioning with dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed by EIC.Note : Punned thickness only shall be measured and paid. |
| 88 | M & L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class \"B\" laid across the cable complete all as specified and directed by EIC. |
| 89 | M&L distribution board SPN8 way with 200 Amp, IP 43rated bus bar double door complete all as directed |
| 90 | S & F in repair of MCB SPN 32 Amps, 415 V with thimble suitable for existing wires complete all as directed by EIC. |
| 91 | S & F in repair amp rating 240V 10 KA\"B\" curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC. |
| 92 | Supply and istallation, testing and commissioning of self supporting totally enclosed factory fabricated LT bus each barpanel box made outof 3.15 mm thickMS sheet with projected globe roof for rain water, protection, dust and vermi proofhinged double shutter doors with neoprene rubber gasket epoxy powder coated including danger plate earth strip ventilation louvers bottom detachal gland plate complete with suitable size zinc chroium platednuts, bolts and washers etc outdoor type cubical panel board suitable for 3 phase 4 wire 415 V 50 Hz and 40 mm x 40 mm x 6 mm angle iron frame, weather proof ventilated with locking arrangement incl the PCC pedestal, comprising the following. (i) Aluminium Bus-Bar 200 A supported with suitable size porcelain standlock with suitable size brass nut, bolts and washers with heat shrinkable coloured coded PVC sleevs for 3 phase and neutral - 01 Set(ii) Incomming MCCB with microprocessor release, 4 pole 63 A, 16 KA, 415 V, 50 Hz Adjustable - 01 No (iii) Outgoing MCCB with microprocessor release, 4 pole, 32 A, 16 KA, 415 V, 50 Hz Adjustable -02 No (iv) MCB SPN 10 KA, 32 A, 240 V-03 No (v) Note- Spare Din rail to be provided for additional MCBs. |
