|
| 1 | Package A: Cable Duct with Cover & all Accessories, Size 1200 mm (W) x 600 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 2 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 388 Blocks |
| 3 | (90 degree) Duct Elbow Horizontal Plane East Side Bend (1200x600) mm with cover |
| 4 | (90 degree) Duct Elbow Horizontal Plane West Side Bend (1200x600) mm with cover |
| 5 | (90 degree) Duct Vertical Outside Bend (1200x600) mm with cover |
| 6 | (90 degree) Duct Vertical Inside Bend (1200x600) mm with cover |
| 7 | (90 degree) Vertical Plane Tee Joins Down (1200x600) to (1200x2000) mm with cover |
| 8 | Duct Eccentric reducer (1200X600) to (1000X400) mm with cover |
| 9 | Duct End Cover (1200X600) mm |
| 10 | Clamp for fixing Duct cover |
| 11 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 12 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 13 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 14 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 15 | Package B: Cable Duct with Cover, Tee Joins & all Accessories, Size 1000 mm (W) x 400 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 16 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 136 Blocks |
| 17 | Duct Eccentric Expander (1000x400) to (1200x600) mm with cover |
| 18 | (90 degree) Duct Vertical Inside Bend (1000x400) mm with cover |
| 19 | (90 degree) Duct Vertical Outside Bend (1000x400) mm with cover |
| 20 | Equal Tee (1000x400) mm with cover |
| 21 | (90 degree) Duct Elbow Horizontal Plane East Side Bend (1000X400) |
| 22 | (90 degree) Duct Elbow Horizontal Plane West Side Bend (1000x400) mm with cover |
| 23 | (90 degree) Vertical Plane Tee Joins Down (1000X400) to (1200X2000) mm with cover |
| 24 | Duct End Cover (1000x400) |
| 25 | Clamp for fixing Duct cover |
| 26 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 27 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 28 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 29 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 30 | Package C: Cable Duct with Cover, Tee Joins, Reducer & all Accessories, Size 800 mm (W) x 300 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 31 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 51 Blocks |
| 32 | (90 degree) Duct Vertical Outside Bend (800x300) with cover |
| 33 | (90 degree) Vertical Plane Tee Joins Down (800x300) to (1200x1800) with cover |
| 34 | Duct concentric reducer (800x300) to (400x200) with cover |
| 35 | Clamp for fixing Duct cover |
| 36 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 37 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 38 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 39 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 40 | Package D: Cable Duct with Cover, Tee Join, Reducer & all Accessories, Size 600 mm (W) x 300 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 41 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 388 Blocks |
| 42 | (90 degree) Duct Vertical Inside Bend (600x300) mm with cover |
| 43 | (90 degree) Duct Vertical Outside Bend (600x300) mm with cover |
| 44 | (90 degree) Vertical Plane Tee Joins Down (600x300) to (1200x1400) mm with cover |
| 45 | (90 degree) Vertical Plane Tee Joins Down (600x300) to (800x1200) mm with cover |
| 46 | (90 degree) Duct Elbow Horizontal Plane East Side Bend (600X300) mm with cover |
| 47 | (90 degree) Duct Elbow Horizontal Plane West Side Bend (600X300) mm with cover |
| 48 | Duct End Cover (600X300) mm |
| 49 | Clamp for fixing Duct cover |
| 50 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 51 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 52 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 53 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 54 | Package E: Cable Duct with Cover & all Accessories, Size 400 mm (W) x 200 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 55 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 14 Blocks |
| 56 | (90 degree) Duct Vertical Inside Bend (400x200) with cover |
| 57 | (90 degree) Duct Vertical Outside Bend (400x200) with cover |
| 58 | Duct Offset Bend (400x200) (400mm Offset) with cover |
| 59 | Clamp for fixing Duct cover |
| 60 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 61 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 62 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 63 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 64 | Package F: Cable Duct with Cover & all Accessories, Size 800 mm (W) x 600 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 65 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 29 Blocks |
| 66 | (90 degree) Duct Vertical Inside Bend (800x600) mm with cover |
| 67 | (90 degree) Duct Vertical Outside Bend (800x600) mm with cover |
| 68 | (90 degree) Vertical Plane Tee Joins Down (800x600) to (1200x1400) mm with cover |
| 69 | Duct End Cover (800X600) mm |
| 70 | Clamp for fixing Duct cover |
| 71 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 72 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 73 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 74 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 75 | Package G: Cable Duct with Cover & all Accessories, Size 800 mm (W) x 400 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 76 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 29 Blocks |
| 77 | (90 degree) Duct Vertical Inside Bend (800x400) mm with cover |
| 78 | (90 degree) Duct Vertical Outside Bend (800x400) mm with cover |
| 79 | (90 degree) Vertical Plane Tee Joins Down (800x400) to (1200x1400) mm with cover |
| 80 | Duct End Cover (800x400) mm |
| 81 | Clamp for fixing Duct cover |
| 82 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 83 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 84 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 85 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
| 86 | Package H: Cable Duct with Cover & all Accessories, Size 600 mm (W) x 400 mm (H) x 3.2 mm (T), 4 Nos. Partition - Epoxy Painted Hot Dip Galvanized Iron (G.I) |
| 87 | Straight Section of Duct with Cover (Each section of length 2.5 meters) Total 15 Blocks |
| 88 | (90 degree) Duct Vertical Inside Bend (600X400) mm with cover |
| 89 | (90 degree) Duct Vertical Outside Bend (600X400) mm with cover |
| 90 | (90 degree) Vertical Plane Tee Joins Down (600X400) to (1000X1200) mm with cover |
| 91 | Duct End Cover (600X400) mm |
| 92 | Clamp for fixing Duct cover |
| 93 | 50x50x6(t) mm angle shall provided on duct at every 1.25 meter for fixing duct cover. |
| 94 | Nuts, bolts, washers etc. for fixing duct cover clamps |
| 95 | Coupler plates with accessories e.g. (nuts, bolts, washers etc.) |
| 96 | Partition plates with accessories e.g. (nuts, bolts, washers etc.) |
