Tender For Electrical And Instrumentation Works On Sub-Contract Basis, In Connection With Composite Tender For Cot, Vadinar For Bina Petchem And Refinery Expansion Project (Bprep) Of M/S.Bharat Petroleum Corporation Limited (Bpcl), Sagar-Madhya Pradesh

TDR : 52958158

Tender Notice
BOQ

17 Days Left

Sagar , Madhya Pradesh

Tender Brief : Tender For Electrical And Instrumentation Works On Sub-Contract Basis, In Connection With Composite Tender For Cot, Vadinar For Bina Petchem And Refinery Expansion Project (Bprep) Of M/S.Bharat Petroleum Corporation Limited (Bpcl)

Document Fees
₹ 39790 /-

EMD
₹ 2686000.0 /-

Tender Value
₹ 13.48 Crore /-

Submission Date
05-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	ELECTRICAL WORKS
2	MV (415V) switchboard supply
3	Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturer\"s works, packing, delivery, Installation, Testing & Commissioning of 415V, 1250A, 65kA (1 Sec.),TPN double front switchboard with main bus bars, vertical busbar and all other auxiliary bus bar, wiring material and items for bus bar connections complete with feeders as listed in data sheet no. B933-003-16-5-DS-1801, power/control wiring, power & control terminals, all other associated mounting hardware, accessories, Installation on foundations, including its civil foundation work, base frame, including all labor and materials as per EIL Standard specification, job specification, data sheets etc. and other codes and standards attached or referred.
4	Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturer\"s works, packing, delivery, Installation, Testing & Commissioning of 415V, 400A, 65kA (1 Sec.),TPN double front switchboard with main bus bars, vertical busbar and all other auxiliary bus bar, wiring material and items for bus bar connections complete with feeders as listed in data sheet no. B933-003-16-5-DS-1802, power/control wiring, power & control terminals, all other associated mounting hardware, accessories, Installation on foundations, including its civil foundation work, base frame, including all labor and materials as per EIL Standard specification, job specification, data sheets etc. and other codes and standards attached or referred.
5	Addition deletion rates of feeders for item nos. 01EE.MG1.01 & 01EE.MG1.02
6	Supply, installation, connection (internal wiring), testing and commissioning of draw out type FVNR-15 motor feeder for 415V Switchgear in vacant module as per hardware datasheet and component datasheet, including all labour and materials, asper approved drawings, specifications of this tender and directions of Engineer-in-Charge.
7	Supply, installation, connection (internal wiring), testing and commissioning of draw out type FVNR-30 motor feeder for 415V Switchgear in vacant module as per hardware datasheet and component datasheet, including all labour and materials, asper approved drawings, specifications of this tender and directions of Engineer-in-Charge.
8	Supply, installation, connection (internal wiring), testing and commissioning of draw out type FVNR-60 motor feeder for 415V Switchgear in vacant module as per hardware datasheet and component datasheet, including all labour and materials, asper approved drawings, specifications of this tender and directions of Engineer-in-Charge.
9	Supply, installation, connection (internal wiring), testing and commissioning of draw out type FVNR-100 motor feeder for 415V Switchgear in vacant module as per hardware datasheet and component datasheet, including all labour and materials, asper approved drawings, specifications of this tender and directions of Engineer-in-Charge.
10	Supply, installation, connection (internal wiring), testing and commissioning of draw out type FVNR-150 motor feeder for 415V Switchgear in vacant module as per hardware datasheet and component datasheet, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
11	Supply, installation, connection (internal wiring), testing and commissioning of draw out type 63A MCCB, timer and contactor-based feeder for outdoor lighting in vacant module of 415V, 65 kA for 1 Sec. switchboard, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
12	Supply, installation, connection (internal wiring), testing and commissioning of draw out type 63A MCCB based feeder for power panels, welding receptacles in vacant module of 415V, 65 kA for 1 Sec. switchboard, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
13	Supply, installation, connection (internal wiring), testing and commissioning of draw out type MCCB based feeder upto 250A having earth fault release for vacant module of 415V, 65 kA for 1 Sec. switchboard, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
14	Supply, installation, connection (internal wiring), testing and commissioning of draw out type MCCB based feeder (Current rating more than 250A and upto 400A) having earth fault release for vacant module of 415V, 65 kA for 1 Sec. switchboard, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
15	Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturer\"s works, packing, delivery, Installation, Testing & Commissioning of MOV\"s distribution boards
16	Flameproof (Ex-d) and weatherproof type 12 ways MOV DB alogwith 2 nos. control junction box suitable for gas group IIC, T3, 415V,TPN, free standing floor mounting type/pedestal mounted type, dust and vermin proof with canopy suitable for outdoor installation including supply of FLP double compression brass nickel plated cable glands, lugs, FLP blocking plugs including all labour and materials, as per approved drawings, data sheets, specifications of this tender and directions of Engineer-in-Charge.MOVDB shall have 2 nos. incomer, 415 V, 250A, TPN, 50 kA (1 sec), 4 pole MCCB withO/C, S/C & E/F releases and mechanical (castle key) interlock, voltmeter with selectorSwitches and ammeter with selector switches for each incomers and 12 nos. outgoingfeeders ,415 V TP 32A, 50kA (1sec) 3-pole MCCB (up to 32A) with O/C,S/C & E/Freleases. All incoming and outgoing MCCBs shall be provided with shunt trip coil andshall be microprocessor based.Incomer Power cable: 2R X 3.5C X 95 sqmm. (FRLS)Outgoing Power cable: 12R X 3C X 4 sqmm (Fire Survival)2 nos. control junction box i.e. 1 no. for command and 1no. for status with adequateterminals (including 10% spare terminals) shall be provided for MOV DB.Command control JB shall be suitable for 4 nos. 12P x 2.5sqmm. incomer cable and 12 nos. 4P x 2.5sqmm outgoing cables.Status control JB shall be suitable for 4 nos. 12P x 2.5sqmm incomer cable and 12 nos. 4P x 2.5sqmm outgoing cables.
17	Flameproof (Ex-d) and weatherproof type 8 ways MOV DB alogwith 2 nos. control junction box suitable for gas group IIC, T3, 415V,TPN, free standing floor mounting type/pedestal mounted type, dust and vermin proof with canopy suitable for outdoor installation including supply of FLP double compression brass nickel plated cable glands, lugs, FLP blocking plugs including all labour and materials, as per approved drawings, data sheets, specifications of this tender and directions of Engineer-in-Charge.MOVDB shall have 2 nos. incomer, 415 V, 125A, TPN, 50 kA (1 sec), 4 pole MCCB withO/C, S/C & E/F releases and mechanical (castle key) interlock, voltmeter with selectorSwitches and ammeter with selector switches for each incomers and 8 nos. outgoingfeeders ,415 V TP 32A, 50kA (1sec) 3-pole MCCB (up to 32A) with O/C,S/C & E/Freleases. All incoming and outgoing MCCBs shall be provided with shunt trip coil andshall be microprocessor based.Incomer Power cable: 2R X 3.5C X 70 sqmm. (FRLS)Outgoing Power cable: 8R X 3C X 4 sqmm (Fire Survival)2 nos. control junction box i.e. 1 no. for command and 1no. for status with adequateterminals (including 10% spare terminals) shall be provided for MOV DB.Command control JB shall be suitable for 2 nos. 12P x 2.5sqmm. incomer cable and 8 nos. 4P x 2.5sqmm outgoing cables.Status control JB shall be suitable for 2 nos. 12P x 2.5sqmm incomer cable and 8 nos. 4P x 2.5sqmm outgoing cables.
18	SWITCHBOARDS / UPS / VSD / BATTERY CHARGERS / PANELS
19	Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor etc., interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineers-in-Charge.
20	Weight of the Unit upto 100 kg.
21	Weight of the Unit from 101 upto 500 kg.
22	Weight of the Unit from 501 upto 1000 kg.
23	Weight of the Unit from 1001 upto 1500 kg.
24	Weight of the Unit from 1501 upto 3000 kg.
25	Weight of the Unit from 3001 upto 5000 kg.
26	MISCELLANEOUS CONTROL GEAR
27	Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations),including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
28	Weight of the unit up to 5 kg.
29	Weight of the unit above 5 kg. but upto 20 kg.
30	Weight of the unit above 20 kg. but upto 100 kg.
31	Weight of the unit above 100 kg. but upto 200 kg.
32	Supply of flameproof and weather proof type Push Button station as per EIL standard specification No. 6-51-0006 as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
33	Emergency push button Stay-put type having 2 NO + 2 NC Independent microswitch contacts with separate actuation mechanism Exd Zone 1, Gas Group IIA/IIB & Weatherproof (IP 65) with 2 Nos. ½” NPT (F) with 2 entries plugged red color, push to shutdown rotate to release with protective cover.
34	Open push button Spring return, 2 NO + 2 NC Independent momentary contact Exd Zone 1, Gas Group IIA/IIB & Weatherproof (IP 65), 2 Nos. ½” NPT (F) with 2 entries plugged green color, push to reset with protective cover.
35	Close push button Spring return, 2 NO + 2 NC Independent momentary contact Exd Zone 1, Gas Group IIA/IIB & Weatherproof (IP 65), 2 Nos. ½” NPT (F) with 2 entries plugged red color, push to reset with protective cover.
36	Green Indication lamp with Cluster LED, 230V AC in a flame proof enclosure (Exd Zone 1, Gas Group IIA/IIB) with cable entry suitable for 1 nos., ½” NPT (F).
37	Red Indication lamp with Cluster LED, 230V AC in a flame proof enclosure (Exd Zone 1, Gas Group IIA/IIB) with cable entry suitable for 1 nos., ½” NPT (F)
38	With start, stop push buttons and one Three position selector switch.
39	With start, stop push buttons and one Three position selector switch and ammeter.
40	PLUGS, SOCKETS AND JUNCTION BOXES
41	Supply of following types of FLP(II A/II B) and WP sockets, plugs and handlamps as per EIL specification No. 6-51-0021, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
42	63 A, 415 V, 5 pin socket.
43	63 A, 415 V, 5 pin Plugs for item no. 01EE.1060.20.10
44	Supply of following types of FLP (II C) and WP sockets, plugs and handlamps as per EIL specification No. 6-51-0021,including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
45	63 A, 415 V, 5 pin socket.
46	63 A, 415 V, 5 pin Plugs for item no. 01EE.1060.30.10
47	Supply, installation, cable termination, connection, testing and commissioning of following types of FLP andWP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
48	FLP (II C) and WP 3 way JB complete with 3 Nos. FLP (II C) cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable.
49	FLP (II C) and WP 4 way JB complete with 4 Nos. FLP (II C) cable glands and 2 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable.
50	Supply, installation, cable termination, connection, testing and commissioning of following types of FLP andWP junction boxes, suitable for gas group IIC, temperature class T3, as per EIL specification No. 6-51-0061, including suitably sized busbars with current rating equal to the largest cable current rating, glands, lugs, earthing terminals, canopy etc, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
51	Suitable for 415V system with 4 Run(s) of 3 core 300 mm²incoming cable(s) and 2 Run(s) of 3 core 240 mm²outgoing cable(s)
52	Suitable for 415V system with 2 Run(s) of 3 core 95 mm²incoming cable(s) and 1 Run(s) of 3 core 50 mm²outgoing cable(s)
53	CANOPIES
54	Supply, fabrication andinstallation of GI canopies for outdoor electrical motors of following frame sizes to render them weather proof including supply of necessary hardware for fixing and clamping with the motor foundation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
55	Frame size upto 80.
56	Frame size more than 80 and upto 112.
57	Frame size more than 112 and upto 180.
58	Supply, fabrication and installation of GI canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
59	Lighting Panel/Power panel/distribution junctions boxes.
60	Manual call points/field call stations.
61	Push button stations.
62	FLP receptacles.
63	ANCHOR FASTENERS
64	Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
65	3/16\" BSW.
66	5/16\" BSW.
67	1/4\" BSW.
68	3/8\" BSW.
69	5/8\" BSW.
70	TESTING AND COMMISSIONING OF MOTORS
71	Testing and commissioning of MV motors of following ratings and checking of all interface connections, change of grease, wherever required, including supply of approved type of grease, no load/full load running of motor, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
72	Upto 5.5 kW.
73	Above 5.5 kW but upto 11 kW.
74	Above 11 kW but upto 22 kW.
75	Above 22 kW but upto 45 kW.
76	Above 45 kW but upto 75 kW.
77	Above 75 kW but upto 125 kW.
78	Testing and commissioning of HV motors of following ratings and checking of all interface connections, change of grease in bearings, wherever required, including supply of approved type of grease, no load/full load running of motor, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge.
79	Above 132 kW but upto 400 kW.
80	Testing and commissioning of safe area/ FLP motor operated valve actuators with integral starter of different sizes, checking of all interface connections, local/remote controls, settings of limit and torque switches, no load/full load running, including all labour and materials,as per specifications of this tender and directions of Engineer-in-Charge.
81	Safe area/FLP motor operated valve actuators.
82	Testing and commissioning of 415V, TPN, Lube Oil Heaters of following ratings, checking of all interface connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge
83	Upto 5.5 kW
84	Above 5.5 kW and upto 11 kW
85	Above 11 kW and upto 22kW
86	Testing and commissioning of 240V, SPN, Lube Oil Heaters of following ratings, checking of all interface connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge
87	Upto 5.5 kW
88	DISMANTLING AND DISCONNECTION OF ELECTRICAL EQUIPMENTS.
89	Disconnection, dismantling of existing Junction box, including transporting to owner\"s store, including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
90	Disconnection, dismantling of already installed earth electrode, backfilling/restoration of earthing pit including all civil works and transporting the dismantled equipment to owner\"s store, including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
91	Disconnection, dismantling of existing cable trays, including relocation of the same to different elevations including transportation of accessories such as couplers, hardwares etc. to owner\"s store, including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge
92	Disconnection of following existing motors (power, control and space heater cables),including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
93	Existing MV motors.
94	Disconnection, dismantaling of existing industrial / flameproof local control stations, including transporting to owner\"s store, including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
95	Existing LCS.
96	Disconnection of power, control and space heater cables from existing switchboards/panels/misc. electrical equipment,including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
97	Removal of power, control and space heater cables from existing buried/RCC cable trenches , including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge.
98	Cables from existing switchboards/panels/misc. electrical equipment.
99	SAFETY EQUIPMENT
100	Supply and laying of 900 mm wide safety insulation mats complying to IS-15652, of following grades required for maintenance of electrical equipment in substation, including cutting to required shape in running length, including all labour and materials, as per applicable Indian or International standards and CEA Guidelines and as per directions of Engineer-in-Charge.
101	3.3 kV grade.
102	11 kV grade.
103	Supply of following items as per applicable Indian standards/CEA Guidelines.
104	Enamelled caution boards.
105	SUPPLY OF SPARES / LAMPS
106	MV HRC Fuses
107	16 A.
108	32 A.
109	63 A.
110	100 A.
111	160 A.
112	LAMPS
113	45 W, 240 V LED Lamp.
114	65 W, 240 V LED Lamp.
115	100 W, 240 V LED Lamp.
116	SUPPLY OF MV CABLES
117	Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
118	3 C x 2.5 sq. mm
119	2 C x 4 sq. mm
120	3 C x 4 sq. mm
121	3 C x 6 sq. mm
122	3 C x 10 sq. mm
123	3 C x 16 sq. mm
124	4 C x 16 sq. mm
125	Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
126	3 C x 50 sq. mm
127	3.5 C x 50 sq. mm
128	3 C x 70 sq. mm
129	3.5 C x 70 sq. mm
130	3 C x 95 sq. mm
131	3.5 C x 95 sq. mm
132	3 C x 240 sq. mm
133	3 C x 300 sq. mm
134	3.5 C x 300 sq. mm
135	Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.
136	2 Pair x 2.5 sq. mm
137	4 Pair x 2.5 sq. mm
138	6 Pair x 2.5 sq. mm
139	12 Pair x 2.5 sq. mm
140	LAYING OF CABLES
141	Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
142	Cables with OD upto 20 mm.
143	Cables with OD above 20 mm but upto 30 mm.
144	Cables with OD above 30 mm but upto 40 mm.
145	Cables with OD above 40 mm but upto 50 mm.
146	Cables with OD above 50 mm but upto 60 mm.
147	Cables with OD above 60 mm but upto 80 mm.
148	Cables with OD above 80 mm but upto 100 mm.
149	Cables with OD above 100 mm but upto 120 mm.
150	Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
151	Cables with OD upto 20 mm.
152	Cables with OD above 20 mm but upto 30 mm.
153	Cables with OD above 30 mm but upto 40 mm.
154	Cables with OD above 40 mm but upto 50 mm.
155	Cables with OD above 50 mm but upto 60 mm.
156	Cables with OD above 60 mm but upto 80 mm.
157	END TERMINATIONS
158	Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but includingfixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
159	Cables with OD upto 20 mm.
160	Cables with OD above 20 mm but upto 30 mm.
161	Cables with OD above 30 mm but upto 40 mm.
162	Cables with OD above 40 mm but upto 50 mm.
163	Cables with OD above 50 mm but upto 60 mm.
164	Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations,cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
165	All sizes from 1P to 4P and upto 2.5 sq. mm
166	All sizes from 5P to 10P and upto 2.5 sq. mm
167	All sizes from 11P to 15P and upto 2.5 sq. mm
168	All sizes from 1T to 8T and upto 2.5 sq. mm
169	STRAIGHT THROUGH JOINTS
170	Supply and Making of heat shrinkable type straight through joints for 1100 volt grade power cablesas per EIL standard specification No. 6-51-0051, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
171	Cables with OD upto 20 mm.
172	Cables with OD above 20 mm but upto 30 mm.
173	Cables with OD above 30 mm but upto 40 mm.
174	Cables with OD above 40 mm but upto 50 mm.
175	Cables with OD above 50 mm but upto 60 mm.
176	Cables with OD above 60 mm but upto 80 mm.
177	Supply and Making of heat shrinkable type straight through joints for communication, fire alarm & control paired cables, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
178	All sizes from 1P to 4P and upto 2.5 sq. mm
179	All sizes from 5P to 10P and upto 2.5 sq. mm
180	All sizes from 11P to 15P and upto 2.5 sq. mm
181	All sizes from 1T to 8T and upto 2.5 sq. mm
182	G.I. & PVC PIPES
183	Supply and laying of following sizes ofG.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
184	50 mm NB.
185	100 mm NB.
186	150 mm NB.
187	Supply and laying of following sizes ofPVC Pipes in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, supply of bends and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
188	50 mm NB.
189	100 mm NB.
190	150 mm NB.
191	STRUCTURAL STEEL
192	Fabrication and installation of steel structural work of any type (equipment, supports, cables trays etc.) fully assembled and erected including necessary supports, foundation etc. excluding supply of steel but including shot blasting, supply of paint and applying of anti-rust primer coat and finished coats of approved synthetic enamel paint as per Table-10 ofspecification 6-79-0020 suitable for highly corrosive environment, all labour and materials complete as per approved drawings and directions of Engineer-in-Charge. (Any item weighing up to 1 kg or less shall neither be measured nor paid).
193	Supply and installation of push button station supports complete with base plate, foundations bolts, grouting and painting(as per Table-10 ofspecification 6-79-0020 suitable for highly corrosive environment) etc., including all labour and materials, as per approved drawings and directions of Engineer-in-Charge.
194	As per std. 7-51-0306
195	As per std. 7-51-0307
196	As per std. 7-51-0308
197	CABLE - TRAYS
198	Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
199	300 mm wide Straight run cable tray.
200	750 mm wide Straight run cable tray.
201	Reducers 750 - 300 LHS.
202	Horizontal bends for 300 mm wide tray with 1000 mm bending radius.
203	Horizontal bends for 750 mm wide tray with 1000 mm bending radius.
204	Vertical outside bends for 300 mm wide tray with 1000 mm bending radius
205	Vertical outside bends for 750 mm wide tray with 1000 mm bending radius.
206	Vertical inside bends for 750 mm wide tray with 1000 mm bending radius.
207	Tee Joints for 300 mm wide tray with 1000 mm bending radius.
208	Supply and installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
209	100 mm wide.
210	CABLE GLANDS
211	Supply of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
212	Cables with OD upto 20 mm.
213	Cables with OD above 20 mm but upto 30 mm.
214	Cables with OD above 30 mm but upto 40 mm.
215	Cables with OD above 40 mm but upto 50 mm.
216	Cables with OD above 50 mm but upto 60 mm.
217	Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
218	Cables with OD upto 20 mm.
219	Cables with OD above 20 mm but upto 30 mm.
220	Cables with OD above 30 mm but upto 40 mm.
221	Cables with OD above 40 mm but upto 50 mm.
222	Cables with OD above 50 mm but upto 60 mm.
223	Cables with OD above 60 mm but upto 80 mm.
224	Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
225	Cables with OD up to 20 mm
226	Cables with OD above 20 mm but upto 30 mm
227	Cables with OD above 30 mm but upto 40 mm
228	Cables with OD above 40 mm but upto 50.0 mm
229	Cables with OD above 50 mm but upto 60 mm
230	Cables with OD above 60 mm but upto 80 mm
231	MARKERS
232	Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
233	Supply and installation of earth pit markers for directly buried GI pipe electrodes as per std. 7-51-0101 with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation, including all labour and materials, as per approved drawings, specifications of this tender and direction of Engineer-in-Charge.
234	CABLE LUGS
235	Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
236	All sizes upto 10 sq. mm
237	All sizes from 16 to 35 sq. mm
238	All sizes from 50 to 185 sq. mm
239	All sizes from 240 to 400 sq. mm
240	Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
241	All sizes upto 10 sq. mm
242	All sizes from 16 to 35 sq. mm
243	All sizes from 50 to 185 sq. mm
244	All sizes from 240 to 400 sq. mm
245	Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
246	All sizes upto 10 sq. mm
247	All sizes from 16 to 35 sq. mm
248	All sizes from 50 to 185 sq. mm
249	All sizes from 240 to 400 sq. mm
250	Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
251	All sizes upto 10 sq. mm
252	All sizes from 16 to 35 sq. mm
253	All sizes from 50 to 185 sq. mm
254	All sizes from 240 to 400 sq. mm
255	SEALING COMPOUND
256	Supply of sealing compound (Bituminous tar or approved equivalent) heating and pouring of compound in the cable stuffing box of flameproof motors and providing effective cable sealing, including all labour and materials, as per specifications of this tender and as per directions of Engineer-in-Charge (Measurement of weight shall be made for sealing compound supplied).
257	FIRE PROOFING OF CABLES
258	Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. (Actual area of surface painted shall be measured).
259	ADAPTORS / REDUCERS / NIPPLES ETC.
260	Supply and fixing FLP(IIC), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
261	Eqpt. Thread 3/4\" PF (J.I.S.)-E.T. Thread 3/4\"ET
262	Eqpt. Thread 1\" PF (J.I.S.) -E.T. Thread 3/4\"ET
263	Eqpt. Thread 1\" PF (J.I.S.) -E.T. Thread 1\"ET
264	Eqpt. Thread 1-1/2\" PF (J.I.S.)- E.T. Thread 1-1/4\"ET
265	Eqpt. Thread 1-1/2\" PF (J.I.S.)- E.T. Thread 1-1/2\"ET
266	FLOOD LIGHT MASTS
267	Design, supply, installation, testing and commissioning of high mast lighting system as per EIL specification No. 6-51-0039, data sheet,including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes and all other sundry materials, special cables etc. as required for each high masts, including fixing and connection of fixtures, cables, earthing, lightning rods and all mounting accessories and hardware as required, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
268	30M high flood light mast for weather proof, including supply of cable glands, lugs, 24 Nos fixture each with 400W LED lamp
269	LIGHTING POLES
270	Supply andinstallation of platform Lighting pole as per std. 7-51-0202,including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
271	Lighting poles for hazardous areas.
272	Supply andinstallation of Flood Light Pole (two) as per std. 7-51-0205 (sheet 2 of 2) (excluding the supply and installation of control gear box/ junction boxes), including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
273	Flood light poles for hazardous areas.
274	HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES
275	Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
276	Well glass type pole mounting type for Platform.
277	Well glass type bracket mounted.
278	Well glass type ceiling mounted.
279	Supply of following FLP/Div.2 lighting fixtures complete with lamps, requisite FLP cable glands, plugs and necessary control gear as per EIL standard specification No. 6-51-0061, data sheet for lighting fixture schedule, including all albour and materials, specifications of this tender and directions of Engineer-in-Charge.
280	Type FLP-LED-1A
281	Type FLP-LED-2A
282	Type FLP-LED-4A
283	Type FLP-LED-5A
284	Supply and installation of Type-`A\" clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
285	Supply and installation of Type-`B\" clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
286	Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer-in-Charge.
287	JUNCTION BOXES (OUTDOOR / INDOOR TYPE)
288	Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
289	3 way.
290	4 way.
291	Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box suitable for indoor installation, complete with 15A, 20 terminals, supply and fixing of cable glands for incoming cable and knock outs for conduit entry for outgoing circuits, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
292	Junction box.
293	LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS
294	Supply, installation, connection, testing and commissioning offlame proof weather proof lighting/power panels(for gas group IIC) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
295	40A, 4 Pole incomer MCB isolator & 6 nos. outgoing Double pole MCBs ( upto 20A) with RCCBs in each outgoing circuits.
296	40A, 4 Pole incomer MCB isolator & 12 nos. outgoing Double pole MCBs ( upto 20A) with RCCBs in each outgoing circuits.
297	40A, 4 Pole incomer MCB isolator & 18 nos. outgoing Double pole MCBs ( upto 20A) with RCCBs in each outgoing circuits.
298	WIRING
299	Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
300	4 C x 2.5 sq. mm
301	EARTH ELECTRODES
302	Supply, installation, testing and commissioning of GI earth electrodes, complete with earth pit as per std. 7-51-0102 and all necessary materials including excavation of earth pit, filling with charcoal and salt, back filling, providing necessary brickwork, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
303	GI earth electrode as per std. 7-51-0102.
304	Supply, Installation, Testing and Commissioning of maintenance free Chemical earth electrode complete with earth pit and all necessary materials including excavation of earth pit, filling with maintenance free chemical for ease of operation and maintenance, back filling, providing necessary brick work, connections, including all labour and materials as per approved drawings, specifications of this tender and directions of engineer-in-charge
305	EARTH STRIPS
306	Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
307	50 x 6 mm
308	40 x 5 mm
309	25 x 3 mm
310	Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
311	50 x 6 mm
312	40 x 5 mm
313	25 x 3 mm
314	EARTHING CONNECTION
315	Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
316	3/8\" dia (10 mm) flexible rope.
317	5/8\" dia (16 mm) flexible rope.
318	8 SWG GI Wire.
319	Supply and installation of 5 m long, 25 sq. mm (168/0.01772\") insulated single core copper flexible conductor with crimped type lug at one end and approved crocodile clip at other end, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
320	5 m long, 25 sq. mm (168/0.01772\") insulated single core Cu flexibleconductor.
321	Supply and installation of 25 sq. mm (168/0.01772\") copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
322	300 mm
323	500 mm
324	EARTH PLATES
325	Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
326	GI earth plate as per std. 7-51-0103.
327	EARTHING CONNECTORS
328	Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
329	Minimum 75mm to maximum 300 mm long
330	PLANT COMMUNICATION SYSTEM
331	Installation, termination and connection of following plant communication system (including back up battery bank, battery charger etc.), including transportation from store/yard to site at the place of installation, assembling and installing in foundation or fixing to wall/structure, aligning, levelling, grouting, cable termination, wiring and all inter-connection and making earth connection etc., first charging of battery, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
332	Weather Proof Intercom station with upto 3 Nos dual position Keys (FLP/Industrial type).
333	Loud speakers with amplifier (FLP/industrial type).
334	Beacon Lamps (FLP/industrial type).
335	Acoustic hood (FLP/industrial type).
336	LAYING OF COMMUNICATION / FIRE ALARM CABLES
337	Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
338	Cables of overall dia. upto 35 mm.
339	Cables of overall dia. above 35 mm.
340	END TERMINATIONS FOR COMMUNICATION/FIRE ALARM CABLES.
341	Termination of following polyethylene insulated armoured jelly filled/ non filled cables including cutting, stripping of cable insulation, sealing of jacket including supply of termination kit, hardware, including all labour and materials, as per approved drawings, specification of this tender and directions of Engineer-in-Charge.
342	For Non-Jelly filled cables of size .9 mm2 pair
343	For Non-Jelly filled cables of size .9 mm5 pair
344	For Non-Jelly filled cables of size .9 mm20 pair
345	For Non-Jelly filled cables of size 1.5 mm2 pair
346	For Non-Jelly filled cables of size .9 mm10 pair
347	SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS
348	Supply of communication, fire alarm & control paired cables of following sizes as per EIL standard specification No.6-51-0052, data sheet, specifications of this tender and directions of Engineer-in-Charge.
349	Non-Jelly filled cables of size .9 mm5 pair
350	Non-Jelly filled cables of size .9 mm10 pair
351	Non-Jelly filled cables of size .9 mm20 pair
352	Non-Jelly filled cables of size .9 mm2 pair
353	Non-Jelly filled cables of size 1.5 mm²2 pair
354	CIVIL WORKS/M.S. CHEQUERED PLATE
355	Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured).
356	Excavation and backfilling of trenches in all types of soil except rock.
357	Excavation and backfilling of trenches in all types of soil including rock.
358	Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge.
359	Fine river sand.
360	Stone dust grading Zone-II, grading limits as per IS-383.
361	Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured).
362	Bricks.
363	Providing and laying plain cement concrete for all depths below and up to a plinth level in foundations including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including supply of all materials and all complete for concrete of M-15 grade with 20 mm and down size graded crushed stone aggregates, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
364	Plain cement concrete.
365	Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
366	6 mm thick M.S. chequered plate.
367	Supply and installation of fire proof sealing system as per IEC-60332 including supply and fabrication of steel frames and other accessories (cement, gravel, sand etc.) including drilling, cutting, welding, surface preparation, dressing/ chipping of concrete, enlargement etc. including all minor masonry and structural works and repair of all damages in line with the enclosed job specification and instructions of the Engineer-in-Charge
368	Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer -in-charge
369	Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge.
370	Circular Cut Out of diameter 150 mm
371	Circular Cut Out of diameter 100 mm
372	Circular Cut Out of diameter 50 mm
373	PAINTING & MARKING
374	Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz.transformers, capacitors, neutral grounding resistors, VFD panels, other panels, etc for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
375	Each alphabet/character upto 2 inch in height/length
376	Each alphabet/character above 2 inch and Upto 4 inch in height/length
377	Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz.light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors,field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required,supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
378	Each alphabet/character upto 2 inch in height/length
379	Each alphabet/character above 2 inch and Upto 4 inch in height/length
380	Each alphabet/character above 4 inch and Upto 8 inch in height/length
381	Each alphabet/character above 8 inch and Upto 12 inch in height/length
382	INSTRUMENTATION
383	PRESSURE GAUGES AND ACCESSORIES (Excl. supply of Impulse pipe/Tubing materials)
384	Installation of Line mounted or Remote mounted or Local Gauge Board mounted Pressure gauge/ Pressure gauge with Pulsation Dampener/ Syphon/ Over-range Protector (direct/ surface mounted/ diaphragm seal type) inclusive of mounting of instrument, supply and erection of supports/tray, mounting on support (if support required) , laying of capillary on tray, fabrication and installationofmanifolds/impulselineswithsupportsasperstandards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Gauge Board, Yoke, Piping material and Calibration.
385	In Carbon Steel as per Standard 7-52-2111
386	PRESSURE INSTRUMENTS (Excl. supply Impulse pipe/Tubing materials)
387	Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Over-range Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/Surface,supply of supports for capillary,supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/impulse lines with supports as perStandard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Piping/tubing materials, all Electrical/ Pneumatic connections, Yoke and Calibration.
388	In Carbon Steel as per Standard 7-52-2111
389	DIFFERENTIAL PRESSURE INSTRUMENTS (Excl. supply of Impulse pipe/Tubing materials)
390	Installation of Differential Pressure Transmitters (including one side capillary type)/ Differential Pressure Switch(including one side capillary type)/ Diaphragm seal type DP Transmitters/ Diaphragm seal type DP Switch including mounting on Yoke/ Surface, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of Supply of Instrument, Pipingmaterial, all Electrical/ Pneumatic connections, Yoke and Calibration.
391	In Carbon Steel as per Standard 7-52-4080
392	ULTRASONIC FLOWMETER
393	Installation of Transmitters/ Preamplifiers for ultrasonic flowmeters on yoke/ instrument (if required) including Straight length spool piece with pressure and temperature compensation loop including laying and termination of interconnection cable supports for cables as required, painting of supports but exclusive of supply of instrument, yoke and calibration.
394	Installation of Transmitters/ Preamplifiers for Ultrasonic Flowmeters
395	SERVO TYPE TANK GAUGES
396	Installation/ interconnection of Servo type Gauges with/ without Tank Farm Management (TFM) System components. Installation of Gauge, Isolation ball valve, Calibration chamber on flanged equipment nozzle, with or without still well, Junction boxes with barriers, power switch, all Electrical connections but exclusive of Supply of Instrument, still well and Calibration/ Setting of gauges.
397	Servo Gauge Installation
398	Installation of SINGLE point/ AVERAGING type RTD on flanged equipment nozzle, all electrical connections but exclusive of Supply of Temperature element, thermowell.
399	Averaging type Temperature Element Installation
400	Installation of tank side indicators/ Electronic units (total system for indication, transmission, marshalling etc. as required for one tank) including mounting on yoke/ support, fabrication and erection of supports and laying of cable up to instrument/ indicator with clamps, termination of cables at both ends but exclusive of Supply of Instruments, Yoke and Calibration.
401	Tank Side Indicator Installation
402	Installation of junction box for multi-dropping including mounting on yoke/ support, supply of angle tray with supports/ laying of cables in trench, fabrication and erection of supports and laying of cable up to junction box, power switch with clamps, termination of cables at both ends but exclusive of Supply of Instruments and Yoke.
403	Junction Box Installation
404	RADAR LEVEL INSTRUMENTS
405	Installation of radar sensor and antenna, flanged type connection on equipment nozzle/ rail mounting with/without still well, but exclusive of supply of instruments. Installation of electronics units (total system for indication, transmission, marshalling etc. for one tank), including mounting on Yoke, supply of angle tray with supports, fabrication and erection of supports and laying of cable up to instrument/probe with clamps, termination of cables at both ends, but exclusive of supply of Instruments, supply of yokes and Calibration.
406	Installation of Top Mounted Radar
407	Installation of tank side indicator/electronic unit (total system for indication/ transmission/marshalling etc., as required for one tank) including mounting on yoke/support, fabrication and erection of supports, laying and termination of interconnecting cable up to instrument/ indicator with clamps, termination of cables at both ends, painting of supports but exclusive of supply of instruments, yoke, cables and calibration.
408	Tank Side Indicator
409	TUNING FORK TYP LEVEL INSTRUMENTS
410	Installation of tuning fork type level switch including installation of primary piping, level instrument, but exclusive of supply of switch, all electrical connections and setting of switch.
411	Tuning fork type level switch
412	INSTALLATION OF PRE-FABRICATED SKIDS
413	INSTALLATION OF SKID MOUNTED PACKAGES(SINGLE/MULTIPLE SKIDS):Handling and transportation of Package consisting single or multiple skids from Owner\"s storage point to work site/contractor\"s stores. Assembly of sub-assemblies, placing the equipment on foundations/structures, levelling, aligning, fixing of foundation bolts, providing (including supply) packing/shim plates, chipping and dressing of foundations,grouting (including supply and applications of grout material), cleaning and flushing of equipment with water, draining and drying with compressed air, erection of inter- connecting piping including some amount of cutting, welding, NDT, hydrotesting/pneumatic testing, wherever required. Purging the line with air/gas as per the instruction of Package supplier (wherever applicable), providing manpower for carrying out pre-commissioning, commissioning and testing under the supervision guidance of Manufacturer\"s/Owner\"spersonnel and rectifying defects, if any and completing the work in all respects as per drawing(s), specifications, scope of work and instructions of engineer in charge for each equipment including drives and accessories listed below :
414	Crude Oil Blending Package Skid
415	DETECTOR SYSTEMS
416	Installation of LEL and H2S detectors/monitors, beacon lights and hooters including supply of supports but exclusive of Supply of Detectors, Yoke and Calibration.
417	LEL Detectors.
418	Beacon Lights
419	Hooters
420	MISCELLANEOUS ITEMS AND DEVICES
421	Mounting of Miscellaneous instrument items as listed below on Yoke; fabrication and erection of Supports and including installation of instrument items,paintingofsupportsbutexclusiveofSupplyofInstrumentitems, Piping/ Tubing material / Calibration and supply and erection of Yoke support.
422	Flame-proof Push Button Station/ Selector Switches /Lamps.
423	Installation of panels / cabinet / consoles
424	Installation of panels / cabinet / consoles inside control room / Satellite rack room with or without instruments of following sizes but exclusive of pneumatic/ electrical connections, supply of panels / cabinet / consoles and installation of base frame and painting of the same.
425	Size < 2200x1000x800 mm > 1000x800x600mm
426	Shifting of Cabinets from Site Storage Area/Warehouse to Control room/SRR as per instructions from Site In-Charge
427	Size <= 2200x1200x800mm or >= 2200x800x600mm
428	CALIBRATION/ TESTING
429	Cleaning, adjusting stroke/ positioner, stroke speed checking of Control and On-off (Shutdown) valves. Providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable and loop testing. Excludes flow calibration
430	Control Valves
431	On-off valves (SDV/ ROV)
432	Cleaning, calibration of the instrumentslisted below including removal of instrumentfromreinstalledlocationslikepanels,enclosures,racks,field etc.,andfixingthembackinrespectiveplaces,providingequipments, necessarytestjig,InstrumentAir,NitrogenCylinders,testreports,all consumable, exceptforspecialimportedtestequipments for electronic instruments to be supplied by owner if available.
433	Diaphragm Seal Pressure Gauges
434	Diaphragm Seal Pressure Transmitters
435	Differential Pressure Transmitters, Diaphragm Seal for D.P.
436	Vibration Switch
437	LEL Detectors
438	Cleaning, checking and functional tests for flowmeters. Providing equipments, necessary test jig, Instrument Air, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available. Excludes flow calibration.
439	Ultrasonic flowmeters
440	LOOP CHECKING
441	Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060.
442	Diaphragm Seal Pressure transmitters
443	Differential Pressure Transmitters, Diaphragm Seal for D.P.
444	Mulitipoint Temperature Transmitters.
445	Tank Level Instruments (Radar type)
446	Vibration Switch
447	Gas Detectors
448	Push Button/Selector Switches/Lamps
449	Hooter / Beacon
450	Control valve positioner
451	Solenoid Valves
452	Limit Switches
453	MOV - Feedback
454	MOV - Command
455	Loop checking (excluding calibration/ testing) of the flowmeters listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060.
456	Ultrasonic flowmeters
457	SUPPLY ITEMS
458	Supply of Junction boxes of various types and specifications
459	Junction Box, Weatherproof type for 12 Pair Cable
460	Junction Box, Weatherproof+ Flameproof (Gas Groups -IIA/IIB) type for 12 Pair Cable
461	Junction Box, Weatherproof+ Flameproof (Gas Groups -IIA/IIB) type for 8 Triad Cable
462	Supply of Cable glands ofvarioustypes and specifications
463	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, SS 304 material with PVC shroud, 1/2\" NPTM
464	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, SS 304 material with PVC shroud, 3/4\" NPTM
465	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, SS 304 material with PVC shroud, 1 1/2\" NPTM
466	Supply of plugs for cable entries of varioustypes and specifications
467	Plug,weatherproof + flameproof (Gas Group IIA/IIB) type, SS 304 material, 1/2\" NPTM
468	Plug,weatherproof + flameproof (Gas Group IIA/IIB) type, SS 304 material, 1 1/2\" NPTM
469	JUNCTION BOX INSTALLATION
470	Installation of weatherproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
471	For cable size 12Px0.5/1.0/1.5/2.5 mm² Signal/Alarm/ Control
472	Installation of weatherproof and/or flameproof junction boxes on free standing support including supply, fabrication and installation of supports along with required ISMC channel and accessories and as per instructions of Site In-charge, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
473	As per installation drawing 7-52-0106 (A) - three junction box installation bottom entry
474	As per installation drawing 7-52-0106 (B) - two junction box installation bottom entry
475	As per installation drawing 7-52-0106 (C) - single junction box installation bottom entry
476	Installation of weatherproof and flameproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
477	For cable size 12P x 0.5/1.0/1.5/2.5 mm²/16 AWG Signal/FF/Alarm/ Control
478	For cable size 8T x 1.5/ 2.5 mm²RTD/ Gas Detector
479	Installation of Multi Cable transit frames complete with all insert blocks, stay plates, unused blocks with cables piece inserted, end packing etc. on wall for Cable entry including necessary civil works, welding, supply and installation of additional steel plate for unused portion of cutouts, fixing of frames, pulling cables to blocks and installation of blocks on frames as per manufacturer\"s recommendation.
480	6 + 6 x 10
481	LAYING OF CABLES
482	Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if requiredthrough IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench.
483	Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm²
484	Signal/ Alarm/ Control Cables of cable sizes 24C /12P x 1.5/ 2.5mm²
485	Special armoured serial link MODBUS TCP/IP/RS485 Serial/ cable
486	Servo Gauge armoured Cable 15C x 1.0 mm²
487	Laying of thermocouple/ RTD/ LEL Detector/ H2S Detector cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs {Instrument Road Crossings}) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/angle tray and preparation of cable trench.
488	1 Triad/ Quad x 2.5 mm2 RTD/ LEL Cable
489	8 Triad/ Quad x 2.5 mm² RTD/ LEL Cable
490	Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench
491	For cable size 2C x 4 mm²
492	Laying of Fibre Optic cables with or without HDPE conduit
493	Laying of Fibre Optic / system cables on ducts, main trays, perforated trays, angle trays, trenches ( including through Instrument Road Crossing) including opening of cable duct covers if required, clamping, glanding the cables, termination at both ends including shields , providing and fixing of identifying tags and testing but exclusive of supply of fibre Optic/Systemcables and erection of ducts, main trays, perforated trays,/angle trays and preparation of cable trench.
494	Laying of FO/system cablesof various sizes upto 30mm OD along withHDPE conduits of 40 mm OD but exclusive of supply of HDPE conduits.
495	Optical Fibre Cable Splicing and termination of each fibre at field at LIU through connectors, OTDR (Optical noise/dB) testing, after looping in loop box, OFC site acceptance testing all complete as per specifications
496	TRENCH WORK
497	Excavation of trenches for burying the cable, preparation of same for laying of cable, filling with sand, laying of brick, back filling and compacting of the excavated earth as per specifications including supply of sand and bricks and as per cable trench layout and removal of surplus earth as per instructions of Engineer- in-Charge.
498	Trench size 300 mm (W) x 300 mm (D)
499	EARTHING
500	Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Electrical Industry Tenders

Electrical Product Tenders

Electrical Products Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Electrical And Instrumentation Works On Sub-Contract Basis, In Connection With Composite Tender For Cot, Vadinar For Bina Petchem And Refinery Expansion Project (Bprep) Of M/S.Bharat Petroleum Corporation Limited (Bpcl), Sagar-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Electrical And Instrumentation Works On Sub-Contract Basis, In Connection With Composite Tender For Cot, Vadinar For Bina Petchem And Refinery Expansion Project (Bprep) Of M/S.Bharat Petroleum Corporation Limited (Bpcl), Sagar-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us