|
| 1 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and removing from site complete all as specified and directed. |
| 4 | Taking down shutters of any descriptionexceeding 2 Sqm each and removing from site complete all as specified and directed. |
| 5 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 6 | S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutterswith two/three track sliding aluminium frame of approved size with power coating any colour minimum thickness 50 micronincluding necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions.Note: Glass Pane and EPDM Rubber beading/gasket shall be measured and paid for seperatley. |
| 7 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 8 | S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 9 | S&F powder coating anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 10 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed. |
| 11 | S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed. |
| 12 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 13 | M&L 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed. |
| 14 | S&F 200mm long aluminium, anodisedbarrel tower bolts of extruded section,complete all as specified and directed. |
| 15 | S&F 150mm long aluminium, anodisedbarrel tower bolts of extruded section complete all as specified and directed. |
| 16 | S&F 125mm Extruded aluminium alloy handle complete all as specified and directed. |
| 17 | S&FAluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 18 | S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed. |
| 19 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 20 | S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified and directed. |
| 21 | S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed. |
| 22 | S&F Pressed steel frames 125mm x 60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 23 | S&F 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers:mouldedbead is provided and planted round the panels (for each side)supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed. |
| 25 | Demoltion ofbrick work built in cement mortar of any specification and in any position complete all as specified and directed. |
| 26 | M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed. |
| 27 | All as per Srl item No 26 here-in-before but using old bricks retrieved from demolition under Srl item 25 here-in-before including cleaning and removal of mortar from old bricks. |
| 28 | Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed. |
| 29 | M&Lrendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed. |
| 30 | M&L rendering10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 32 | M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primercomplete all as specified and directed. |
| 33 | M&L preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed. |
| 34 | M&L Preparationof newly plastered surfaces of ceiling& applying three coats of white washcomplete all as specified and directed. |
| 35 | M&L Complete removal of existing treatment of wall suface and applying two coats of oil bound distemper, over a coat of primer on a coat of 1 mm thick wall care putty, complete all as specified and as directed. |
| 36 | M&L of for washing rubbing down and stopping of cement basepainted surfaces and applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed. |
| 37 | M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and directed. |
| 38 | M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red lead primed steel surfaces complete all as specified and directed. |
| 39 | M&Lpreparing new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed. |
| 40 | M&Lpreparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 41 | M&LPreparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 42 | Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises complete all as specified and directed. |
| 43 | M&L Non skidceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsset and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 44 | M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 45 | S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over 20 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 46 | M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 47 | M&L glazed coloured designer ceramic tiles of size 450mmx350mm/300mmX450mm & 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 48 | Demolition of unreinforced cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 49 | M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed. |
| 50 | M&L 100mm thick, cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in subbase of interlocking complete all as specified and directed. |
| 51 | M&L precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over a layer of 25 mm thick sand cushioning complete all as specified and directed.Makes: SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW |
| 52 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 53 | M&L PCC 1:2:4, type B-1 (using 20m graded stone aggregates) as in kerbs, rounded or chamfered on edges complete all as specified & as directed. |
| 54 | S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in positionon roofs including fittings & dismantling existing water storage tank, complete all as specified and directed. |
| 55 | S&F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed. |
| 56 | S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed. |
| 57 | S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and directed. |
| 60 | S&F 600mmx450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified and directed. |
| 61 | S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nosper RM and fixed withPVC rawl plugs & steel screws as inrepairs complete all as specified and directed. |
| 62 | S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and directed. |
| 63 | S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed. |
| 64 | S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 32mm bore as fixed complete all as specified and directed. |
| 65 | S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) \"P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair,complete all as specified and directed. |
| 66 | S&F in repair wall hung vanity type wash hand basin cabinet of size 805mmx450mm with wash basin (white) complete all as specified and directed. |
| 67 | S&F in repairs Health Faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook complete all as specified and directed. |
| 68 | S&F fencylength looking mirror 6mm thick with bevelled edges of selected quality glass and fixed with spacers to wall, complete all as specified and directed.Makes:- Saint Gobain or equivalent |
| 69 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified. |
| 70 | S&F in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and directed. |
| 71 | S&F in repair Bib tap ofCP brass, 15mm bore, fancy typescrewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 72 | S & F in repair of CP WHB mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses complete all as specified and directed. |
| 73 | S&F 1.00 mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified and directed. |
| 74 | S&F Wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed. |
| 75 | S&F Vitreous China bowl urinal flat back, size of 465mmx355mmx265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed. |
| 76 | Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 77 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed. |
| 78 | S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed. |
| 79 | S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed. |
| 80 | S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed. |
| 81 | S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed. |
| 82 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 83 | S&F 75mm bore PVC (SWR) pipes(pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 84 | S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed. |
| 85 | S&F in repair CP central hole basin mixer for wash hand basin including all fittings i.e including connection pipe as per manufaturers specificationcomplete all as specified and directed. |
| 86 | S&F in repair CP fency type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer\"s instruction and as directedcomplete all as specified and directed. |
| 87 | S&F Vitreous china wash down water closet pan (pedestal pattern) white/coloured cascade type 640mmX360mmX690mm (monolithic flush cistern type) Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions complete all as specified and directed. |
| 88 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 89 | M&L Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed. |
| 90 | M&L fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) including aluminium anodised snap grid frame 605mmX605 mm for false ceiling incl hanging arrangement complete all as specified and directed. |
| 91 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed. |
| 92 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 93 | M&L brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed. |
| 94 | M&L 10 mm thick, screed bed or bedding layer of mortar in cement mortar (1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed.Note: WPC shall be measured and paid for separately. |
| 95 | M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed. |
| 96 | Supply only water proofing compound. |
| 97 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced applicationcomplete all as specified complete all as specified and directed. |
| 98 | M&L 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed. |
| 99 | M&L Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed. |
| 100 | All as per Srl item No 99 here in before but except tiles.Note: Tiles retrieved from dismantling shall be re-used after cleaning the tiles and the cost of cleaning of tiles shall deemed inclusive in the quoted rate. |
| 101 | M&L Cement concrete (1:2:4), type B-1 (using 12.5mm graded stone aggregate) min radius of 75mm th as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary slopingon roofincluding form work complete all as specified and directed. |
| 102 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable/pipe and getting out, complete all as specified and directed. |
| 103 | Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed. |
| 104 | Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed. |
| 105 | S&F in replacement of Galvanised iron steel tubing 50 mm (2\") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed. |
| 106 | S&F in replacement of Galvanised iron steel tubing 25 mm (1\") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed. |
| 107 | S&F in replacement of Galvanised iron steel tubing 20 mm (3/4\") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed. |
| 108 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 50 mm dia and fixed complete all as specified and directed. |
| 109 | Cutting existing CI/GI pipe 40/50/80/100 mm bore including run lead joints of suitable size with necessary fittings complete all as specified and directed. |
| 110 | Taking down carefully existingunserviceable copper/aluminiumpoint wiring (light, fan, socket orpower point etc)completewith fittings/fixures such asswitches sockets, ceiling rose, fan regulators, FTLfittings etc. removing materials for taking credit and making good disturbedsurface of wall, floors, etc complete all as specified and directed. |
| 111 | M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copperconductor, multi stranded of size 1.5 sqmm, single core,in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :-(a) One light/fan/Bell Pointcontrolled by one single pole one way switch. |
| 112 | (b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch |
| 113 | (c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch |
| 114 | Allas per ItemNo 111here-in- before but one three pin 15 Amps switch socket out let on the independentboardwith 2.5 Sq mmPVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and directed. |
| 115 | S&F in repairModular Switch one way6 A, 1 module complete all as per specified anddirected. Make - Precision/Anchor/Havells/Legrand |
| 116 | S&F in repairModular Switch one way16 A, 1 module complete all as per specified anddirected.Makes: - Precision/Anchor/Havells/Legrand |
| 117 | S&Fin repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified anddirected.Makes: - Precision/Anchor/Havells/Legrand |
| 118 | S&Fin repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified anddirected.Makes: - Precision/Anchor/Havells/Legrand |
| 119 | S&Fin repair Modularwhite cover plate including GI box inner, 1 module complete all as per specified & directed.Makes: Precision/Anchor/Havells/Legrand |
| 120 | S&Fin repair Modularwhite cover plate including GI box inner, 3 module complete all as per specified & directed.Makes: Precision/Anchor/Havells/Legrand |
| 121 | S&F in repairModularwhite cover plate including GI box inner, 6 module complete all as per specified & directed.Makes: Precision/Anchor/Havells/Legrand |
| 122 | S&F in repairModularwhite cover plate including GI box inner, 8 module complete all as per specified & directed. Makes : Precision/Anchor/Havells/Legrand |
| 123 | S&F in repairModularwhite cover plate including GI box inner, 12 module complete all as per specified & directed. Makes : Precision/Anchor/Havells/Legrand |
| 124 | S&F modular metal flush box 1/2 module complete all as specified and directed. |
| 125 | S&F modular metal flush box 3 module complete all as specified and directed. |
| 126 | S&F modular metal flush box 6 module complete all as specified and directed. |
| 127 | S&F modular metal flush box 8 module complete all as specified and directed. |
| 128 | S&F modular metal flush box 12 module complete all as specified and directed. |
| 129 | S&Fin repair Modular step type regulator,120 W - 2 module complete all as per specified anddirected. Makes - Precision/Anchor/Havells/Legrand |
| 130 | S&FLED tube light fitting18 Watts, 4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient230V,complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 131 | S&F LED 2 feet X 2 feet, 36 watts, 230 volts recessed mountingluminaires (White/Warm White), complete with all accessories pre-wired and including connecting up with two core 1.5 sqmm copper conductor cable complete all as specified and directed. |
| 132 | S&F LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 133 | S&FLamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and directed. |
| 134 | S&F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65mm x 50mm, 3 terminals ISI marked complete all as specified and directed. |
| 135 | S&F Modular Bell push 6A 1 module duly ISI marked complete all as specified and directed. |
| 136 | S&F bell ding dong AC 230 volts single pole complete all as specified and directed |
| 137 | S&F modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and directed. Makes : Havells Cat Part No AHFSMXW251 or techno-commercially equivalent in approved makes. |
| 138 | S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 139 | S&Fsheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 140 | S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed. |
| 141 | S&F in repair sheet metal enclouser SPN DB\"s 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 142 | S&F MCB single pole neutral(SPN) 240 volts, 40 Amps, 10 KA complete all as specified. |
| 143 | S&F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as specified. |
| 144 | S&F MCB SP, 40 Amps, 240 volts, \"B\" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified |
| 145 | M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed.Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run. |
| 146 | M&L earthing complete with galvanized steel plate elecrode of size60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed. |
| 147 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 Core complete all specified and directed. |
| 148 | M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of underground cable complete all as specified and directed. |
