Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed. |
| 2 | S&F non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 3 | M & L white non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 4 | M & L Glazed Ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300 x 7 mm thick primium quality over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles, complete all as specified & directed. |
| 5 | S&F for Joint less non skid ceramic tiles8-9mm thick (square/rectangular) polished dark shade, area of each tile exceeding0.18 but n exc 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 6 | Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid, beded and pointed in any morter, complete all as specified and directed. |
| 7 | M&L for Green marble work 18 to 20 mmthick ( table rubbed and polished) one piece as in stairs landing, risers of steps, jambs, pillars, window cills cooking platforms etc , jointed with white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick rendering in CM 1:4 etc, complete all as specified and directed. |
| 8 | Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 9 | M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 10 | M & L Rendering/plastering, 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces finished even and fair, complete all as specified and directed. |
| 11 | M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and fair as in ceiling, complete all as specified and directed. |
| 12 | M&L forwall/ roof projections including facia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over2mm thick cement base putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed at any height incuding necessary scaffolding, complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over2mm thick cement base putty and sanding the surface to prepare the surface even and smoothat any height incuding necessary scaffolding over new/complete removal surfaces. complete all as specified and directedContd...13.01/- |
| 14 | NOTES FOR ITEM NO.12 to 13:-(a)The work pertaining to smart periodical services shall be executed by authorized applicator through manufacturer of which the materials i.e ,acrylic water based exterior grade primer, acrylic emulsion Paint, Distemper, water baesd premium acrylic smooth exterior emulsion, Putty etc. is proposed to be used by the contractor and approved by GE.(b) Cost of scaffolding etc of building shall be included in the quoted rate.(c)Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work.(d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats.(e) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.(f) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. (g) Primer/ Distemper/ Texture Paint/ emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/ chajja/ building edges/ borders/ projections where contrasting color as specified and directed is to be applied). (h) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication). |
| 15 | M&L for applying two coats of oil bound distemper of new plastered wall surfaces of wall including preparation of surfaces, complete all as specified and directed |
| 16 | M & L for applying two coat of Oil Bound distemperon old surfaces of wall includingpreparation of surface, complete all as specified and directed |
| 17 | M & L for applying three coats of White wash on newly plastered surfaces of ceiling including preparation of surfaces,complete all as specified and directed |
| 18 | M & L for applying two coats of white wash on old Ceiling surface including preparation of surface, complete all as specified and directed |
| 19 | M & L for applying three coats of White wash on newly plastered surfaces of wall including preparation of surfaces,complete all as specified and directed |
| 20 | M & L for applying two coat of white wash over old surface of walls including preparation of surfaces complete all as specified and directed |
| 21 | M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc)(i)Qty of ploymer to be used 15% by weight of the cement. (ii)Use of electrical mixer to get the homogeneous dough on bond coat surfaces.(iii)To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed.(v)Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika oras directed. |
| 22 | Material and labour for shotcreting average thickness 30 mm in RCC columns, beams and slab etc. with cement concrete1:1.5:3 nominal mix having minimum cement content of 350 Kg per Cum. Concrete having the specified minimun characterstic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6 mm maximum size in proportion as per design criteria and Hardener/ admixture) incl the cost of centering and shuttering at edges and corner etc as directed by Engineer-in-Charge incl chipping of unsound/week concrete mateial 50 mm average thickness from slabs, beams/ columns etc with mannual chiesels or standerd power driven percussion type machine incl tapering of all edges, make square shoulder of cavities incl cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removal of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron, applying the SBR Latex based bonding agent on each layer of the shootcreting work of Dr Fixit Pidicrete URP on the entire surface complete all as directed including pressure grouting with epoxy injection grout including 5 mm thick cement plaster in CM (1:3) finished even and smooth without using extra cement including removing rubbish material from building and thrown in low lying lying area at any distance upto 500 metres from the site complete as directed by Engineer-in-Charge.Contd...21.01/- |
| 23 | Make of chemical : Epoxy bonding agent, Rust remover, Anti corrosive coating, Epoxy grout, Hardener/ admixture shall be ofBerger/ Sika/Fosroc/Pidilite or Techno commercial approved by GE.Notes : (i) Complete treatment to be executed by approved applicator (Applicator to be approved by GE).(ii) The Contractor and manufacture of shotcreteshall give the warranty before commencement and also for the strengths achievedin the postcompletion of work.(iii) The chemicals to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.(iv) Hard drawn steel wire fabricwill be measured and paid seperately |
| 24 | Supply and fixing hard drawn steel wire fabric not exc 4 kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of \"L\" shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 25 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified and directed. |
| 26 | All as per item No 23 here-in-before but size exceeding 1.5 Sqm & notexceeding 4 Sqm each, complete all as specified and directed. |
| 27 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etcincluding making good jambs portion by providing plaster in CM 1:4 and finishes as per existingcomplete all as specified and directed. |
| 28 | M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified and directed. |
| 29 | S&F35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etcsize of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified and directed. |
| 30 | S&F 30mm thick, Flush shutters, solid core construction, with partical board core, commercial type on both sides,one face is covered with deco rative face veneer with lipping/frame to match, complete all as specified and directed. |
| 31 | M & L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 32 | M & Lsolid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). |
| 33 | S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) 2 mm thick framefor doors, windows, ventilators with one or more rebates includingjoining cleats/aluminium beading for fixing incl hinges etc, complete all as specified and directed. |
| 34 | S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 1.30 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitabletower bolt (02 no) handle (1no.) in each leaf complete all as specified and directed.Note:- (i) Aluminium chowkhat /frame, glass,wiremess and aluminium grill shall be measured and paid separately. |
| 35 | S&F 4.8 mm thick sheet glass ordinary quality and glazingfixing with rubber beads in windows/ventilators in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 36 | S&F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed to aluminium ventilator complete all as specified and directed. |
| 37 | S & F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 38 | S & F stainless steel Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 39 | M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 40 | M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces, complete all as specified and directed. |
| 41 | Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 42 | S&F Aluminium Anodised handles 150 mm long fixed to doors/windows, complete all as specified and directed. |
| 43 | S&F Aluminium Anodised tower bolts 200 mm long fixed to doors/windows, all as specified and directed.complete all as specified and directed. |
| 44 | S & F Aluminium Anodised butt hinges, 150 mm long,fixed with galvanised mild steel hinge pin, complete all as specified and directed. |
| 45 | S & F Aluminium Anodised Sliding door bolt, 250 mm long with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed with galvanised mild steel hinge pin, complete all as specified and directed. |
| 46 | S&F in repair Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified and directed. |
| 47 | S & F Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 48 | S & F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified and directed. |
| 49 | S & F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases, pinning in making good facing where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing used in brick wall and incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 50 | All as per item above 47 herein before but 20 mm bore tubing, complete all as specified and directed. |
| 51 | S & F in repair Stop valve fancy type, cast copper alloy chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified and directed. |
| 52 | S & F in repair Bib tap fancy type, cast copper alloy chromium plated, 15mm bore,with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 53 | S & F Looking mirror of selected quality beveled edge glass of size 600x450 mm and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repairs complete all as specified and directed. |
| 54 | Supply & Fix in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as specified and directed. |
| 55 | S & F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified and directed. |
| 56 | S & F PVC connection 15 mm size PTMT nuts of length 450 mm fixed, complete all as specified and directed. |
| 57 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 75 mm dia, below or above ground level, jointed in cement mortar and taking out, complete all as specified and directed. |
| 58 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including dismantling CI pipe/any type alongwith fittings of 100 mm dia, below or above ground level, jointed in cement mortar and taking out, complete all as specified and directed. |
| 59 | PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar, complete all as specified and directed. |
| 60 | All as per item 57 above here-in-before but 75mm bore, complete all as specified and directed. |
| 61 | PVC (SWR), floor trap,75mm bore, Plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 62 | S & F PVC (SWR) junction single, (single T) ordouble, (double T) equal or unequal 110 mm, all as specifiedcomplete all as specified and directed. |
| 63 | S&F PVC rain water pipes 110mm bore including fixing to walls with MS clamps including dismantling pipe any type alongwith fittings of 100 mm dia, below or above ground level, jointed in cement mortar and taking out, complete all as specified and directed. |
| 64 | Dismantling brick tiles laid in single layer jointed & pointed in cement mortar, complete all as specified and directed. |
| 65 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof), complete all as specified and directed. |
| 66 | M&L for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof padding, complete all as specified and directed. |
| 67 | M & L 10mmplaster in CM(1:4) finished even and smooth without using extra cement on bottom layer of batten roof with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and directed. (WPC shall be measured separately) |
| 68 | M&L for water proofing treatment to roof surface includingparapet wall comprising with the following course of treatment/ specifications form bottom to top:-(a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing.Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer\"s instructions.(ii) A minimum overlap shall be 75mm length wise and 100 mm width wise ofpolymeric membranes respectively and sealed all overlaps and joints as manufacturer\"s instructions. |
| 69 | M&L for two coat of aluminium paint over APP membrane, complete all as specified and directed. |
| 70 | Demolition of brick work built in cement mortar of any specification and in any position, complete all as specified and directed. |
| 71 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified and directed. |
| 72 | M&LAll as per item 69 above here-in-before but using old bricks retrieved from demolition under item above here-in-before including cleaning and removal of mortar from old bricks, complete all as specified and directed. |
| 73 | M&LBrick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, complete all as specified and directed. |
| 74 | Demolition of reinforced cement concrete in any position not described else where, complete all as specified and directed. |
| 75 | Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work, complete all as specified and directed. |
| 76 | M&L for laying APP based polymeric membrane 3mm thick with minimum weight not less than3 kg/sqm, reinforced with non wovenpolyster fabric (wt not lessthan 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces ofSunken portion ,complete all as specified and as directed. |
| 77 | M & L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surfaceof sunken portion wall and floor with water proofing compound (in case of re placement of bottom layer tile), complete all as specified and directed. (WPC shall be measured separately). |
| 78 | S&F GI pipe 40 mm bore medium grade including fixing to walls as in spouts of sunken portion, complete all as specified and directed. |
| 79 | M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling or above floor and mass concrete, complete all as specified and directed. |
| 80 | M & L for PCC (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection and the same filled with bitumen mastic (01 Part of bitumen and 03 Part of sand) complete all as specified and as directed. |
| 81 | M & L for formwork to chullah, hooks, chajjas, troughs and similar work including edges, complete all as specified and directed. |
| 82 | M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in chajja, supported on walls, beams, roofs, landing, bolconies, canopies and in shelves and like, complete all as specified and directed. |
| 83 | M&L MS TMT bars 10mm dia and over,cut to length,bent to shape reqd,incl cranking, bending for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars, complete all as specified and directed. |
| 84 | M&L MS TMT bars 6-8mm dia and over,cut to length,bent to shape reqd,incl cranking, bending for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed. |
| 85 | M & L for repairing the edges of concrete chajjas, facias, column & the like by providing PCC (1:2:4) type B-0 including all necessary formwork and/ or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3) with chiken wire mesh, after applying a coat of cement slurry @ 3 Kg/Sqm of surface finished even and fair, surface area not execeeding 600 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as spcified and directed. |
| 86 | M & L for pcc (1:3:6) type C2 (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and as directed. |
| 87 | M & L chequered cement concrete tiles 20 Cm x 20 Cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors mixed with pigment to match with colour of tiles over and incl screed bedding 20 mm thick in cm(1:6),complete all as specified and directed. |
| 88 | M&L for 100 mm thick PCC (1:4:8) type B-2 (using 40 mm graded stone aggregate ) as in sub base for floors etc complete all as specified and directed. |
| 89 | M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as in base for pavings laid in alternative bays including glass dividing strips 3mm thick etc complete all as specified and directed. |
| 90 | M&L 300mm dia boring holes in normal strata of 50m depth complete all as specified and directed |
| 91 | S&F PVC pipe 150mm dia class \"A\" incl all necessary fitting complete all as specified and directed. |
| 92 | M&L gravel packing incl jute as filter media 12.5 size around PVC pipe complete all as specified and directed. |
| 93 | M&L gravel packing incl jute as filter media 3 to 5mm size around PVC pipe and filling around complete all as specified and directed. |
| 94 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed. |
| 95 | Excavating over areas exc 1.50 m and n exc 3.0mdeep and getting out in soft/loose soil, complete all as specified and directed. |
| 96 | Excavating over areas exc 3.0 m and n exc 4.50 mdeep and getting out in soft/loose soil, complete all as specified and directed. |
| 97 | M&L for PCC 1:4:8 type \"D2 using 40mm graded stone aggregate in foundation filling & mass concreate, complete all as specified and directed. |
| 98 | M&L for Formwork to rough finished flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 99 | M&L for Cement concrete M25 Design Mix (20 mm graded aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and directed. |
| 100 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed |
| 101 | M&L for Cement concrete M25 Design Mix (20 mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; ncluding attached pilasters and buttresses , complete all as specified and directed. |
| 102 | M & L for formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete all as specified and directed |
| 103 | M&L for RCC M25 Design Mix (20 mm graded aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span,complete all as specified and directed. |
| 104 | All same as per item No 101 above but 5mm dia and over and including 10mm dia in stirrups spacers and binders, complete all as specified and directed. |
| 105 | Rendering 10mm thick in CM on fair faces of brick work or concrete surface, complete all as specified and directed. |
| 106 | Returning, excavated soil, filling in, incl spreading leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 107 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point,in soils complete all as specified and directed. |
| 108 | M & L PCC 1:2:4 type B-0 using 12.5 mm stone aggregates as in coping including necessary formworkto be finished even and smooth, complete all as specified and directed. |
| 109 | M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggrigates as in foundation bed to brick drains mass concrete, complete all as specified and directed. |
| 110 | M&L for Brick work in cement mortar (1:4) using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified and directed. |
| 111 | M&L for brick work using sub class \"B\" old sizebricks laid on edge bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) as in top of drains, complete all as specified and directed. |
| 112 | S&F reinforced concrete pipe of 450mm dia, class NP2 laid and jointed complete with collers complete all as specified and directed. |
| 113 | M & L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested laid in 1:3:6 cement concrete, complete all as specified and directed. |
| 114 | Extra for forming fair finish to drain or channels 60 cm internal girth in cement concrete using extra cement incl forms, moulds/mitred stopped ends in manholes etc complete all as specified and directed. |
| 115 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed. |
| 116 | M & L Hardcore of broken bricks of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 117 | M&L 25mm thick PCC 1:2:4 type B-1,using 20mm graded stone aggregate, as in sub base of flooring,surface finish rough to receive floor topping complete all as specified and directed. |
| 118 | Reinforced cement concrete (1:1.5:3), type A1(M20) using 20mm graded stone aggregate asFoundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete like, complete all as specified and directed. (form work and reinforcement measured separately). |
| 119 | Supply only integral water proofing compound (WPC),ISI marked complete all as specified and directed. |
| 120 | M & L Cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints, complete all as specified and directed. |
| 121 | M & L Formwork tosoffits of suspended slabs such as roof slabs, floor slabs landings and similar work (Horizontal or sloping), complete all as specified and directed. |
| 122 | Reinforced cement concrete (1:1.5:3),type A1(M20) using 20mm graded stone aggregate as in roof/floor slabs supported on walls, beams & columns landing, balconies, canopres,aech slabs and in shelves and the like complete all as specified and directed. (form work and reinforcement measured separately). |
| 123 | Reinforced cement concrete (1:1.5:3),type A1(M20) using 20mm graded stone aggregate as in lintel up to 1.5 m span including necessary form work complete all as specified and directed. (form work and reinforcement measured separately). |
| 124 | S&F aluminium anodised handles 125 mm long fixed to doors all as specified and directed. |
| 125 | S&F aluminium anodised tower bolts 150 mm long fixed to windows all as specified and directed. |
| 126 | M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixedto walls and celling or laid in floor, complete all as specified and directed. |
| 127 | All as per item No 124 here-in-before but 20 mm bore tubing, complete all as specified and directed. |
| 128 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified and directed. |
| 129 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 130 | S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed. |
| 131 | M & L cement concrete 1:3:6 type C2 with using 40 mm graded stone aggregate as in concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested completed all as specified and directed |
| 132 | M & L 150 mm dia salt glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and directed. |
| 133 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipes, complete all as specified and directed. |
| 134 | S & F Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs, complete all as specified and directed. |
| 135 | S & F Ball valve of brass, 20mm bore, high pressure with ploythene float and fly nut complete screwed for iron pipe of brass ferrule and fixed, complete all as specified and directed. |
| 136 | S & F Bib tap of cast copper alloy fancy type, 15mm bore, with crutch or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 137 | S & F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed. |
| 138 | S & F Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 139 | S & F Low level flushing cistern, PVC (White) 10 liters capacity with inlet ball float valve PVC flush pipe and necessary fixing accessories and connecting to water pipe and WC etc and fixed,complete all as specified and directed. |
| 140 | S & F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing, complete all as specified and directed. |
| 141 | S & F Vitreous china (White) flat back urinal of size 465x355x265mmwith grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, flush pipe, union for discharge pipe, complete all as specified and directed. |
| 142 | S & F Pillar tap, 15mm bore, cast copper alloy,with capstan heads, chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 143 | S & F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs, complete all as specified and directed. |
| 144 | S & F Stop valves of cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butter fly handle, with long shank and cup (concealed type), complete all as specified and directed. |
| 145 | S & F Steel ventilators fixed type complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and directed. |
| 146 | M&L for Cement base paint in two coats over a coat of cement wash on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed. |
| 147 | M & L for precast cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregate as in manhole cover /Buffle wall and placing where directed including necessary formwork, complete all as specified and directed. |
| 148 | Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete withfitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfacesof walls and roofs etc.and to match with existing colour complete all as specified and directed. |
| 149 | Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB\"s (single phase or three phase) of any capacity all as specified and directed. |
| 150 | S&FPoint wiring complete with 1100 volts grade PVCFRLSinsulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly, complete all as specified and directedforfollowing : (a)One light/fan/bell/Bldg security light point controlled by one single pole one way switch. |
| 151 | All as per item No. 148 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board, complete all as specified and directed. |
| 152 | All as per item No. 148 here-in-before One 3 pin 5 Amp socket outlet point controlled by one switch on sameboard, complete all as specified and directed. |
| 153 | All as per item No. 148 here-in-before but one 5 Amps socket outlet point controlled by one single pole switch one way and wiring with 1.5 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 1.5 Sqmm green colours PVC FRLS insulated, unsheathed, stranded copper conductor cable, complete all as specified and directed. |
| 154 | All as per item No.148 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC FRLS insulated, unsheathed, stranded copper conductor cable, complete all as specified and directed. |
| 155 | S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 156 | S&F Switch piano flush type 16 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 157 | S&F Socket outlet, 2 in 1, 5 pin, 5 Amp, piano flush type, ISI marked, complete all as specified and directed. |
| 158 | S&F Socket outlet, UNI, 2 in one6 Amps & 16 Amps, white in colour, duly ISI markedcomplete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 159 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals dulyISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 160 | S&F batten holder 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 161 | S&F rotary stepped type electronic fan regulator compatible for BLDC for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 162 | Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 163 | S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed. |
| 164 | S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable thermal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and directed. |
| 165 | S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed. |
| 166 | S&F MCB SPN, 40A - 63Amps, 240 volts,10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning, complete all as specified and directed. |
| 167 | S&F MCB SP, 6A-32 Amps, 240 volts, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning, complete all as specified and directed. |
| 168 | Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core PVC FRLS Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076, complete all as specified and directed. Note : Ceiling fans obtained/ taking down from item Sr No. 146 as above |
| 169 | S&F LED street light fitting toughened glass 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp incl suitable size MS/ GI bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection, complete all as specified and directed. |
| 170 | Earthing complete with galvanized steel plate elecrode of size60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009). |
| 171 | S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 4 core, flat or circular, PVCFRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed. |
| 172 | M&L Dry and clean fine sand for cable cushioningto underground cable protection, complete all as specified and directed. (Excavation and earth work measuredseparately). Note- Punned down thickness shall be measured. |
| 173 | S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. (Excavation and earth work measured separately. |
| 174 | S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc including taking down, complete all as specified and directed. |
| 175 | S&F exhaust fan heavy duty copper winding with louvers complete of sweep size 300 mm, single phase with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection, complete all as specified and directed. |
| 176 | M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X20mm dia including excavation, returning filling, complete and all as directed and specified. |
| 177 | Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge. |
| 178 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
