|
| 1 | De-Watering:-Suplying all materials, labours, T&P, 5.00 HP Diesel Pump set with POL, Pump Operator etc. and De-watering the clear water/muddy water etc. all complete as per the required specification and direction of Engineer in charge |
| 2 | Dismentaling brick or stone masonry in lime or stone mortar under 3m. Height including stacking the useful materials for reuse and removing the debries within 50 m. lead. |
| 3 | Supplying all labour, material & T&P for earthwork in excavation of foundation in ordinary soil with initial lead and lift including rough dressing and breaking clods etc complete as per direction of EIC |
| 4 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge. |
| 5 | Supplying all labour, material & T&P for filling foundation and plinth with sand including all cost, conveyance, royalty, watering ramming etc complete as per direction of EIC. |
| 6 | Supplying all labour & T&P for P.C.C. (1:4:8) using 4cm HG metal including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC |
| 7 | Rough stone dry packing in approns and rivetments with hard granite stone including all cost, conveyance, royalty etc complete. |
| 8 | Supplying all labour & T&P for P.C.C. (1:3:6) using 4cm HG metal including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC |
| 9 | Rigid smooth centring and shuttering for P.C.C. foundation and Plinth bend and footing bases of columns, mass concrete, pre-cast slabs etc. |
| 10 | Cement concrete M-15 with 20mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royalty etc. complete. |
| 11 | Supplying all labour & T&P for R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete.A) Foundation base & footing |
| 12 | B) Plinth Beam |
| 13 | C) Lintel/Bed Block/Bearing of Chajja |
| 14 | D) Column & Beam |
| 15 | E) Roof Slab / Landing/ Waste Slab |
| 16 | Supplying all labour & T&P for cutting, bending & binding of M.S.rod and tying the grills in position including cost, conveyance of M.S.rod and binding wire etc complete. |
| 17 | Supplying all labour & T&P for Fly Ash brick masonry with CM (1:6) including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EICFoundation & Plinth |
| 18 | Superstructure |
| 19 | Providing and fixing of chequired tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 20 | Providing and fixing chequired tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 21 | Supplying all labour & T&P for Providing and fixing vertified tiles of size 600mmX600mm coloured or printed series (homogeneous) in floor on 25 mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 22 | Supplying all labour & T&P for Providing and fixing vertified tiles of size 600mmX600mm coloured or printed series (homogeneous) in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 23 | Supplying all labour & T&P for 2.5 cm thick grading concrete(1:2:2) on roof slab with 6 mm size hard granite chips on new work. |
| 24 | Supplying all labour & T&P for 12mm thick C.P (1:6) over brick work including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC. |
| 25 | Supplying all labour & T&P for 16mm thick C.P (1:6) over brick work including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC. |
| 26 | Supplying all labour & T&P for priming walls with water based cement primer on walls on new work to give an even shade including cost of primer etc complete. |
| 27 | Supplying all labour & T&P for Finishing walls with weather coat of ISI two coat on new work to give an even shade including cost of weather coat etc complete. |
| 28 | Supplying, fitting and fixing of MS grill/ Shutter with all cost, conveyance, labour etc complete. |
| 29 | Supplying, fitting and fixing of FRP door with FRP Door Frame all cost, conveyance etc complete |
| 30 | Priming one coat with any approved primer including cost of primer for Steel work. |
| 31 | Painting two coat with any approved paint including cost of paint |
| 32 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, labour, T&P etc. required for the complete in all respect |
| 33 | Supplying fitting & Fixing of Percolated Galvanized Iron Profile Sheet Semi gloss of 1000mm Width & total Coated thickness 0.50 mm in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. complete including cost of sheet & all fittings(per 1sqm) |
| 34 | Supplying all materials labour T&P for providing Mild Steel Tubular Posts OR rectangular Purloins with Runner Bracing for Tubular Trusses made out of ERW tubes of OD 76.1 mm and 3.15 mm Thick Grade YST 210 confirming to ISS no 1161/79 (3rd Revision) duly Painted with Red Oxide Primer etc Complete. |
| 35 | Providing and laying interlocking factory made cement concrete paver block of 60 mm thick M30 grade made by block macking machine with strong vibratory compaction and approved size & design shape laid in required colour and pattern over 50mm thick compacted bed of course sand & filling the joints with sand including all cost and conveyance etc complete. |
| 36 | Providing and Laying (to level or slopes) and jointing with rubber rings pre-cast reinforced socket and spigot concrete pipes Class NP-3 of the following diameters conforming to IS:458 - 2003 suitable for rubber ring roll on joint of the following internal diameter as per specification complete. (Earthwork in trenches to be measured and paid for separately) as per the specification and direction of the Engineer-in -charge. A) Cost of PIpe (600mm Dia) |
| 37 | B) Cost of (600mm Dia) |
| 38 | C) Transportation |
| 39 | D) Labour |
| 40 | Transportation of earth by mechanical means within 5 km lead including loading and unloading etc complete |
| 41 | SINKING OF 200 MM x 150 MM SIZE PRODUCTION WELL THROUGH D.T.H OR COMBINATION DRILLING RIGS IN HARD ROCK AREAS WITH PVC/GI CASING PIPESLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).200mm Dia |
| 42 | 150mm Dia |
| 43 | Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.Labour charges for lowering of -200mm dia ASTMD-1785/89 sch-80 pvc pipe |
| 44 | Cost of 200mm dia ASTMD-1785/89 sch-80 pvc pipe ( including OHC & C.F ) |
| 45 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge |
| 46 | Construction of 20 users Septic TankSupplying all labour, material T&P for earth work in excavation of foundation in all kinds of soil with 50 Mtr. initial lead and 1.5 mtr. lift including rough dressing and leveling the bed etc. all complete as per PW specification and direction of Engineer-in-charge |
| 47 | Excavation of foundation |
| 48 | Supplying all labour, material T&P for filling foundation and plinth with raw sand well watered and rammed etc. all complete including cost, conveyances, and royalty of all materials to site as per PW specification and direction of Engineer-in-charge |
| 49 | Supplying all labour, material T&P for providing P.C.C.(1:4:8) using 12mm size H.B.G. chips including hoisting and laying etc. all complete including cost, conveyances, and royalty of all materials to site and curing as per PW specification and direction of Engineer-in-charge |
| 50 | Supplying all labour & T&P for R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 51 | Supplying all labour, material T&P for providing 1st class F.A.. brick work in CM (1: 4 ) using Bricks having crushing strength not less than 75 kg/cm2 in super structure etc. all complete including cost, conveyances, and royalty of all materials to site and curing as per PW specification and direction of Engineer-in-charge. |
| 52 | Supplying all labour, material T&P for providing R.C.C.( 1:11/2:3 ) using 12mm size H.B.G. chips including hoisting and laying etc. all complete including cost, conveyances, and royalty of all materials to site and curing as per PW specification and direction of Engineer-in-charge |
| 53 | Supplying all labour, material T&P for providing cutting, bending, binding MS tor rod for RCC work including tying the grills and placing in position including cost of binding wire and steel etc. all complete including cost, conveyances, and royalty of all materials to site as per PW specification and direction of Engineer-in-charge |
| 54 | Supplying all labour, material T&P for providing 16 mm thick cement plaster in CM (1: 6 ) with punning etc. all complete including cost, conveyances, and royalty of all materials to site and curing as per PW specification and direction of Engineer-in-charge. |
| 55 | Supplying all labour, material T&P for providing flush pointing over brick work etc. all complete including cost, conveyances, and royalty of all materials to site and curing as per PW specification and direction of Engineer-in-charge. |
| 56 | Supplying all labour, material T&P for providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting etc. all complete including cost, conveyances, and royalty of all materials to site as per PW specification and direction of Engineer-in-charge. |
| 57 | Fitting and fixing of step iron |
| 58 | 1.00mtr dia RCC leach pit of 1.80mtr ht.Cost of R.C.C. RingsCement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work |
| 59 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 60 | Supplying fitting and ucoated HYSD bar rein forcement complete |
| 61 | 1.00mtr dia RCC leach pit of 1.80mtr ht.Earth Work exavacation in ordinary soil of SoilA) Initial lead and lift |
| 62 | Cement concrete (1;4;8) with 4cm size hard granite metal. |
| 63 | 50mm thick R.C.C Slab (1:1½:3) with 12 mm size chips including Centering and shuttering etc |
| 64 | Supplying fitting and ucoated HYSD bar rein forcement complete |
| 65 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 66 | Cost of R.C.C Ring with Internal dia 1.2 mtr.(Outer) and Height 0.30 mtr. Including cost of labour and materials for lowering in the Trench and Transporation |
| 67 | Supplying of all labour T&P for lowering of 1.20mtr dia RCC Ring in Leach Pit as per direction of Engineer In Charge etc all complete |
| 68 | Construction of Inspection Chamber.(0.90x0.80x0.45)mCement concrete (1:4:8) |
| 69 | A) Fly ash . brick Work in C.M.(1:5) |
| 70 | Cement concrete (1:2:4) for benching and chanelling |
| 71 | 12mm thk.C.P.in C.M.(1:3) for outside surface. |
| 72 | 12mm thk.C.P.in C.M.(1:3) for inside surface with punning. |
| 73 | Extra labour for benching and chanelling |
| 74 | 80mm thk. RCC slab in cement concrete (1:1.5:3)- |
| 75 | M.S.reinforcement @ 0.70qtl/cum |
| 76 | Rigid smooth centerimng and shuttering for RCC slab |
| 77 | 2000 LTR OVER HEAD TANK Please Enable Macros to View BoQ information |
