|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 2 | S&FMild Steel Rolled sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etccomplete all as specified and as directed. |
| 3 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and as directed. |
| 4 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 5 | Dismalting of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 6 | S&FPre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructionand as directed. |
| 7 | S&FPre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructionand as directed. |
| 8 | S & F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed. |
| 9 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 10 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 11 | Demolition of Precast Concrete work/ precast concreteblock built in cement mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 12 | M & L for Pre-cast cement concrete block masonry using PCC, Type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed. |
| 13 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed. |
| 14 | M&L forrendering 15mm thick plaster in CM (1:4) onbrick/block wall or concrete surfacesfinished even & without using extra cement plaster complete all as specified and as directed. |
| 15 | M&L forrendering 15mm thick plaster in CM (1:6) on brick/blockor concrete surfacesfinished even & smooth without using extra cement plaster complete all as specified and as directed. |
| 16 | M&L preparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk). |
| 17 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additivescoat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 18 | M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion painthaving VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 19 | M&L for complete removal of old distempered surfaces andapplying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as specified and as directed. |
| 20 | M&L for preparation of old plastered surfaces of walland applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk) |
| 21 | M & L for preparation of old plastered surfaces of ceiling and applying single coat of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk) |
| 22 | Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame. |
| 23 | Taking down shutters of any description exc. 1 Sqm and n.exc. 2.00 Sqm each. |
| 24 | M&L providing and fixing factory made uPVC any colour Sliding window Three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludescost of glass and includes all other connectedaccessories. Net Opening will be measured forpayment purpose. gap and grooves should be filled with silicon agent) |
| 25 | M&L providing and fixing factory made uPVC any colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glassNote:- Gap and grooves should be filled with silicon agent |
| 26 | S&F of 6mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 27 | Supply and fixing factory made uPVC any colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 28 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 29 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc., complete all as specified and as directed. (considered for Railing on balcony /staircase portion at any postition) |
| 30 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store andrubbishoff the premises, complete all asdirected. |
| 31 | M&L 75mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) on floor as sub base or roof surface to bring uniform surfaces complete all as specified and directed |
| 32 | M&L for 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes, complete all as specified and as directed. |
| 33 | M&L for 10mm thick rendering in CM (1:4) on vertical surfaces as backing coat of wall tiles etc, complete all as specified and as directed. |
| 34 | M&L for vitrified double charged coloured ceramic tiles 10 mm thick ( Square/ rectangular) area of each tilesnot exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match all as specified and directed. |
| 35 | - Ditto - all as per item No 34 here-in-before but on dado / skirting complete all as specified and directed. |
| 36 | - Ditto - all as per item No 34 here-in-before but as in vertical surfaces/skirting complete all as specified and directed. |
| 37 | S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl cutting to reqd shape and size complete all as specified and directed. |
| 38 | Dismantling of stone slabs and tiles of anydescription or thickness in floors, approns and laid bedded and pointed in any mortar etc., complete all as specified and as directed. |
| 39 | M&L for Endura Vitrified step tiles 300mm x 950mm x 12mm thick in stair case thread step set and jointed neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15 mm thick screed bed in CM (1:4) etc., complete all as specified and as directed.Note :- The tiles haveembossed tread lines provide extra grip and bull nosed fully vitrified. |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measuredoverall as fixed along the centre lineb over fittings and accessories) PVC pipe of size 150mm, 110mm, 75mm from trenches and walls with all fittings incl necessary excavation, RFRand removal upto 250mtrs complete all as specified and directed. |
| 41 | Supply & laying 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches floor or wall and similar works complete all as specified and directed. |
| 42 | - Ditto - all as per item No 41 here-in-before but 110mm internal dia pipe complete all as specified and directed. |
| 43 | - Ditto - all as per item No 41 here-in-before but 75mm internal dia pipe complete all as specified and directed. |
| 44 | S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and directed. |
| 45 | S&F in repair 75mm dia PVC (SWR) branch piece (single Y) equal or unequal with ovel access door complete all as specified and directed. |
| 46 | S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and directed. |
| 47 | S&F in repair 110mm dia PVC (SWR) branch piece (single Y) equal or unequal with ovel access door complete all as specified and directed. |
| 48 | Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified and directed. |
| 49 | - Ditto - all as per item No 48 here-in-before but 25 mm outer dia complete all as specified and directed. |
| 50 | - Ditto - all as per item No 48 here-in-before but 32 mm outer dia complete all as specified and directed. |
| 51 | M&L Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc.,and making good, cutting not ecx 10 cm girth complete all as specified and directed. |
| 52 | S&F in repair Vitreous china white heavy duty Counter Top wash hand basin of 520x440x180mm size, including waste coupling and waste pipe all as specified and directed. (Make : Johnson) |
| 53 | S&F in repair 15mm bore fancy type CP Centre hole Wash Basin Mixure high quality without popup waste with 450mm braided hoses complete all as specified and directed. (Make Jaquar) |
| 54 | S&F in repairs, 15mm bore CP angular stop cock fancy type high quality with wall flange complete all as specified and directed. (Make : Cat No 5053N of Jaquar/T1310C of Johnson/272210430041 of Somany) |
| 55 | S&F in repairs, 15mm CP Bib Taps fancy type heavy duty with wall flange all as specified and directed.(Make Jaquar) |
| 56 | S&F in repairs, 15mm CP 2 Way Bib Cock heavy duty all as specified and directed.(Make Jaquar) |
| 57 | S & F in repair CP Health Faucet high quality with 8mm dia, 1.2 Meter long flexibletube & wall hook complete all as specified and directed.(Make Jaquar) |
| 58 | S&F in reapir CP Towel Rail fancy type high quality 600mm long complete all as specified and directed.((Make Jaquar) |
| 59 | S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and directed.(Make Jaquar) |
| 60 | S&F in repair Corner glass shelf high quality of 5mm thick glass & CP railing with bracket complete all as specified and directed.(Make Jaquar) |
| 61 | S&F in repair high quality CP Towel Ring square with round flange fancy type complete all as specified and directed.(Make Jaquar) |
| 62 | S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed. (Make Jaquar) |
| 63 | S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type(Make Jaquar) |
| 64 | S&F in repairs vitreous chinaware wash down water closet pan (Pedestal pattern) single piece WC with PP seat cover, hinges fixing accessories set, cistern fittings at overall size 640x360x390 etc complete all as specified and directed.(Make Jaquar) |
| 65 | S&F in repair Waste pipe any dia (32/40mm) complete all as specified and directed. |
| 66 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long bodywith swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 67 | Supply and fixing in repair10 litre capacity PVClow level valve less syphonic action type flushing cistern, white, with inlet,ball valve, float and handle including brackets, and bends complete all as specified and as directed. |
| 68 | S&F 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed. |
| 69 | S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and directed. |
| 70 | M & L for Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types all as specified and as directed. |
| 71 | Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses, regulators and fittings complete and making good the disturbed surfaces complete all as directed and as directed. |
| 72 | Material and Labour Point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps socket outlet independent point controlled by one, one way switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. |
| 73 | - Ditto - all as per item No. 72.00 here-in-before butone3 pin 5 amp switch socket out let independent complete all as specified and directed. |
| 74 | - Ditto - all as per item No. 72.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping / PVC conduit complete 2.5 sqmm multistraded complete all as specified and as directed. |
| 75 | - Ditto - all as per item No. 72.00 here-in-before but using2.5 Sqmm size stranded copper conductor cable for one 16 Amp switch 2.5 sqmm for socket outlet point on independent board completePVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dollyall as specified and directed by Engineer-in-Charge. |
| 76 | - Ditto - all as per item No 72.00 here-in-before but with 4 Sqmm single coremulti standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dollyincluding taking down old u/s point wiring complete all as specified and as directed. |
| 77 | S&Fswitch piano flush type, single pole one way, 5 Amp complete all as specified and as directed. Make:- Panasonic/Anchor / Havells. |
| 78 | Supply & fixswitch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and as directed. Make:- Panasonic/Anchor / Havells. |
| 79 | Supply and fix Socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed.Make:-Panasonic/Anchor / Havells. |
| 80 | S & F for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings after taking down old U/S complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.. |
| 81 | S&Fceiling rose, PVC/Polycarbonate, 65 x 50 mm,three terminals complete all as specified and directed. Make:- Panasonic/Anchor / Havells. |
| 82 | S&Fceiling fan regulator electronic Step type, solid state, , 240 volts,complete all as specified and as directed. Make:- Panasonic/Anchor / Havells.. |
| 83 | Supply and fixingflameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 84 | Supply and fixingflameproof 1Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed. |
| 85 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length after taking down old U/S complete all as specified and as directed.Make:- Bajaj /Panasonic / Havells/ Crompton . |
| 86 | Supply and fixing LED lights fitting 4 feet,1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old U/S complete all as specified and as directed.complete all as specified and as directed.Make:- Bajaj /Panasonic / Havells/ Crompton . |
| 87 | S&Freplacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed at site. |
| 88 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high.efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete..with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old U/S complete all as specified and as directed.complete all as specified and as directed.Make:- Bajaj /Panasonic / Havells/ Crompton . |
| 89 | Supply and fixing Fluorescent tube light fitting. flameproof type FLP-WP of T5 1X36 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed. |
| 90 | Supply and fixingsecurity light fitting LED type,20 Watts 240 Volts luminous shall be more than2000 lumen, efficiency not less than 100 lm/Watt,and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube lightsecurity light fittingcomplete all as specified and directed. |
| 91 | Supply and fixingsub main wiring with two run of single core 10 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC conduit not less than 32mm dia with all fittings including 10 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC conduit all as specified and as directed.Note : (i) Two run of single core cable 10 sq mm and one run earth wire 10 sq mm will be measured as one length. |
| 92 | Supply and fixingsub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC conduit not less than 25 mm dia with all fittings including 6 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC conduit complete all as specified and directed.Note : (i) Two run of single core cable 6 sq mm and one run earth wire 6 sq mm will be measured as one length. |
| 93 | Supply and fixingsub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC casing caping with all fittings including 4 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing capingall as specified and as directed.Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4.0 sq mm will be measured as one length. |
| 94 | Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed. |
| 95 | Supply and fixingMCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail,12 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed. Make:- Legrand/L & T/ Hager/ Siemens/ ABB/ Schneider./C&S Electric Ltd. |
| 96 | Supply and fixingMCB 6 to 32 Amps, SP, 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and directed.. Make:- Legrand/L & T/ Hager/ Siemens/ ABB/ Schneider. |
| 97 | Supply and fixingMCB 6 to 32 Amps, DP 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and directed.. Make:- Legrand/L & T/ Hager/ Siemens/ ABB/ Schneider./C&S Electric Ltd. |
| 98 | Supply and fixingMCB TPN DB made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 240 volts complete all as specified and as directed. Make:- Legrand/L & T/ Hager/ Siemens/ ABB/ Schneider./C&S Electric Ltd.. |
| 99 | Supply and fixingTP 63 Amps,415 Volts , MCB\"B- Curve breaking capacity 10 KA as complete all as specified and directed. Make:- Legrand / L&T/ Hager/ Siemens/ ABB/ Schneider. |
| 100 | Cuttingthe existingrequired on brick wall in square/round type suitable for fixing Exhaust fan includingcement work grouting 4 Nos long bolts nuts washers and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfacesincluding facing / finishing complete all as specified and directed. |
| 101 | Supply & FixingExhaust fan AC single phase 240 V of size 450 mm sweep with louvre specially designed by kitchen in domestic ventilation.plastic body and blade,finish high quality engineering plastic heavy duty motor, protective bird guard, complete all as specified and directed. Make - Havells/USHA /CG/ORIENT or equivalent.Note-: Taking down old fan and depositing to MES store |
| 102 | Supply & Fixing Ceiling fan AC single phase 240 V of size 1400 mm sweep metal body and blade, powder coated metallic finish,complete all as directed and specifed. Make- Havells/USHA /CG/ORIENT or equivalent. Note-: Taking down old fan and depositing to MES store |
| 103 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 104 | M&L for excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil for layiing of wter supply pipe line/UG cable complete all as specified and directed. |
| 105 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 106 | M&L for removing excavated material ( soils of any type) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 107 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation base of poles and other similar locations all as specified & directed including demoltion of old PCC/broken PCC complete all as specified and directed. |
| 108 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate with and including all necessary form work including demoltion of old PCC/broken PCC complete all as specified & directed |
| 109 | Materials and Labour Cutting /boreing of existing road / path , hardstandingetc for taking out cable and water pipe to protection with iron cover plate for passing cable,water pipe and making good the disturbed road top surfaces with following cement concrete all type, usingof suitable depth and finished withspeed breaker complete all as specified and directed. |
| 110 | Supply & laying in replacement Telerex DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polyethylene including couplers, bends, cap etc.,with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and directed |
| 111 | Taking out unserviceable UG cables of any type and any sizes from trenches etc and removing from the site of work complete all as specified and directed.Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately under relevant item of these schedule. |
| 112 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 120 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed. |
| 113 | Supply and laying GI pipe light grade with all fittings in trenches80mm bore of GI pipe complete all as specified and directed. |
| 114 | Supply and fix MCCB 4 pole 250A, 36KA, 415V thermal and magneticadjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe paneland electric connection including taking down old one complete all as specified and as directed.Make: Havells/ L&T/ Legrand |
