|
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.As per SSR item No.46.09 |
| 2 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. As Per SSR Item No. 46.13 |
| 3 | Removing the existing cement Plaster of any thikness without causing dustnuissance and staking the debris upto distace of 50 mtrs. As per SSR Item No.32.33 |
| 4 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S.65241983 having 6mm dia bars 3 Nos.And strips @ 250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm As Per SSR Item No.39.57 |
| 5 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.complete.As per Item No.32.11 |
| 6 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Superstructure including striking joints,racking out joint watering and scaffholding etc.Complete. |
| 7 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. As Per SSR Item No.32.07 |
| 8 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.As per Item No.35.09 |
| 9 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. As per Item No.23.01 |
| 10 | Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.As per SSR Item no.36.19 |
| 11 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As per SSR Item No.32.34 |
| 12 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using |
| 13 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete As Per SSR Item No.36.03 |
| 14 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.As Per SSR Item No.36.12 |
| 15 | Providing Gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 mm thick section |
| 16 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete As Per SSR Item No.42.87 |
| 17 | Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete.As Per Item No .46.54 |
| 18 | Manualy clearing by removing the chockes from Nahni Trap,Gully Trap,Wash basin unit,Sink and WC with the help of required tools for proper functioning the same etc. complete. As Per Item No.46.55 |
| 19 | Providing and applying two coats of exterior weather shield paint of approved manufactureand of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 20 | Providing and constructing B.B. masonry chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 0.9 x 0.9 M internal size and depth upto 1.2 M with SFRC And Cover Every Increse Depth 30 Cm of 2393/- (PERCOLATED SFRC) |
| 21 | Desilting the Supply Well ,Intake Well / Head Works ,Sump of water supply/sewerage works etc.in wet or dry condition including lifts upto 9 M and lead upto150 M as required beyond the work site,stacking,spreading,including necessary guarding,etc.complete,as directed by Engineer-in-charge. |
| 22 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or asdirected |
| 23 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete |
| 24 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or asdirected etc. complete. |
| 25 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 26 | Providing and fixing 15 mm diameter PVC Aquakraft type of approved make super bib tap with flange including all accessories etc complete |
| 27 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete As Per SSR Item No.42.90 |
| 28 | Providing and Fixing 30 MM thick BOTH SIDE PRE LAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19x19 mm for style sand 15x15 mm for the top and bottom rails,M.Sframe shall have a coat of metel primer of approved make and manufacture.M.S frame shall be covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm,of size 30 mm thickness 70 mm without of which 50 mm shall be flat and 20 mm shall be tapered in 45?angle one ither side forming stiles ;and 5 mm thick,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the innerside to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mmshall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provide either side of the panel. Anadditional 5mm(+/0.25) thick PVC strip of 20mm width is to be stuck on the bottom sideof the \" c \" channel prelaminated panel ing of 5mm (+/0.25) thick PVC sheet to be fitted in side the M.S. frame welded/sealed to the styles and rails with 5mm (+/0.25)x30 mm PVC sheet be ading one ithersideandjoinedtogetherwithsolventcementadhesive etc,10mmthickness(5mm(+/0.25)x2nos)20mmwidecrossPVCsheetasgapinsert for therailandbottomrail.Door tobefixedtoframeswith3 nosM.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares |
| 29 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing |
| 30 | Providing and Laying machine cut machine polished kota stone flooring 25 mm to 30 mm thick and required width in plain/diamond pattern on bed of 1:6 CM Including cement float,filling join with neat cement slurry ,curring ,polishing and cleaning etc complete |
| 31 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 32 | Solid Core Flush door Single leaf Providingand fixing factory made solid core flush door i nsingle leaf 35 mm thick, decorative types,of exterior grade, as per detailed drawings, conforming toI.S.:2202 1962 (Revised) with approved face veneers on both faceswith/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts,mat finish stainlesssteel fixtures fastenings, finishing with french-polish/waxing complete. (without door frame).Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter. As Per SSR Item No.51.60 |
| 33 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material. As per SSR Item No 3.02 |
| 34 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 35 | Providing and laying in situ / ready mix cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)) with SCADA with Natural / VSI standard Artificial Sand) |
| 36 | Conveying materials(Murrum, Building Rubish, Earth) for a lead of over 5Km. inclusive from the site of excavation to the site of deposition as directed. (Beyond Lead 5km) As per SSR Item no.2.25 (Lead chart C) |
| 37 | Royalty Charges Please Enable Macros to View BoQ information |
