|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:. all kinds of soils |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 4 | Providing and laying in position cement concrete of specified grade M-7.5 including curing but excluding the cost of centering and shuttering - All work upto plinth level with 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade M-7.5 including curing but excluding the cost of centering and shuttering - All work upto plinth level with 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reiforcement for R.C.C work including straightening, cutting, bending, placing in position & binding with binding wire all complete, Thermo Mechanically Treated Bars (500 D) (All work at all levels complete). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc for mass concrete. |
| 10 | Lintels, beams, plinth beams, griders, bressumers and cantilevers |
| 11 | Columns, pillars piers, abutments, posts and struts |
| 12 | Stairs, (excluding landings) except spiral staircases : |
| 13 | Suspended floors, roofs, landings, balconies and access plateform |
| 14 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 15 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 16 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : First class kail wood |
| 18 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Ist class kail wood 30 mm thick |
| 19 | Providing and fixing glass panes with putty, beading and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.21.1 With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws |
| 21 | Painting With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 22 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work. |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 24 | Providing/Fixing of door window stard wire fittings A) T.Bolts i) 100 mm |
| 25 | ii) 150 mm |
| 26 | B) Handlesi) 125 mm |
| 27 | ii) 150 mm |
| 28 | C) L-drops (Link) i) 200 mm |
| 29 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) in fine sand |
| 30 | Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete. |
| 31 | Providing and laying Vitrified tiles in floor with different sizes(thickness to be specified by the manufacturer), with water absorptionless than 0.08% and conforming to IS: 15622, of approved brand andmanufacturer, in all colours and shades, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Paymentfor grouting of joints to be made separately). Size oftile 600x600mm |
| 32 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring cut granite stone of required size and shape of approved shade, colour and texture in , flooring laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. (18 mm thick ) |
| 33 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railingwith necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 36 | Finishing walls with textured exterior paint of required shade on Newwork (two or more coats applied @ 3.28 liter/10sqm) over and includingbase coat of exterior primer applied @ 2.20kg/10sqm |
| 37 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (Hand lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid. |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps (01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps. |
| 40 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453x357 mm |
| 42 | Providing and fixing toilet paper holder C.P brass |
| 43 | Providing and fixing PTMT Soap Dish holder having length os 138 mm breadth 102mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms |
| 44 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms . |
| 45 | Providing anf fixing brass bib cock of approved quality 15mm nominal bore |
| 46 | Providing and fixing 15 mm nomonal bore C.P brass angle value for basin mixer and geyser of approved make confirming to IS: 8931 |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 25 mm nominal bore |
| 48 | Providing and fixing uplasticised PVC connection pipe with brassunions :45 cm length15 mm nominal bore |
| 49 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 20mm OD(SDR-7.4) |
| 50 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 51 | P/F 0f 1.5 hp unidirectional flow of kriloskar make and as per IS specification |
| 52 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe) (PRINCE ISI MARK)110 mm dia |
| 53 | 75 mm dia |
| 54 | 40 mm dia |
| 55 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 56 | Providing and laying of PVC conduit pipes 25 mm dia of approved quality in slab and walls including all bends complete job |
| 57 | Providing and laying of fan junction of approved quality in slab and walls including all bends complete job |
| 58 | Providing and laying of lamp junction of approved quality in slab and walls including all bends complete job |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 60 | Providing and installation of 50litre capacity water heating gyser of approved brand VENUS with all accessories complete job |
| 61 | Providing and fixing 15 mm nominal bore C.P. brass Wall Mixer/basin mixer of approved brand and manufacture including all fittings and fixtures, complete job |
| 62 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 63 | Supply , Fabrication and installation of table made of wooden joists(Budloo wood) ,19mm thick Plyboard platform top and back fixed with all fixtures as per the design and pattern approved by intending department .The item shallalso include providing and fixing of sunmica sheet over the table with 5mm thick glass pane of size 6\"x3\" size and wooden panelling on front side and stairs and fixing of two no. shelves for lawyers. |
| 64 | Providing and fixing of wooden Balluster railing with 4\"\"x4\"\"hand rail and 2.5\"\"x2.5\"\" wooden Ballast @6\"\" centre to centre.incl. primer polish |
| 65 | Providing and fixing of wooden Ballast master piece 5\"\"x5\"\" to be fixed with geaser bolts etc.inc. primer/polish |
| 66 | Septic Tank/Soakage pit |
| 67 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres, All kinds of soil |
| 68 | Providing and laying of stone soling 75 mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete |
| 69 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 70 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level using 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 71 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level and above using Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 72 | Centering and shuttering including strutting, propping etc and removal of formwork forFoundations, Footings, Bases of Columns etc for mass concrete |
| 73 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in superstructure above plinth level upto floor five level, Cement mortar 1:6 ( 1 cement : 6 coarse sand) . |
| 74 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 75 | Dry random Rubble massonary with hard stone in foundation and plinyth . Using quarry stone with bond stone . |
| 76 | Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50mm thick with 20mm nominal size stone aggregate Please Enable Macros to View BoQ information |
