|
| 1 | Dismantling plain or corrugated steel sheeting of any type asbestos/steel, any gauge, thickness, including Nainital or similar pattern roof covering sheets complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, eaves and valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and provided with welded or soldered joints complete all as specified and directed. |
| 5 | S&F Anodised aluminium snap grid of size 605 X 605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified ®.including dismantling old Frame of wooden or aluminumor any patteren old frame/grid and removing fron site complete all as specified and directed. |
| 6 | S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling old AC/CGI/PVC/woodenor any patteren old sheet and removing from site complete all as specified and directed. |
| 7 | Taking down cement plaster of any description upto roof including necessary scaffoldings including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 8 | M&L 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement etc complete all as specified and directed. |
| 9 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer\"s instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 10 | Supply only liquid water proofing compound complete all as specified and directed. |
| 11 | M&L for 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work over providing and applying plaster of paris putty of 1 mm thicknessover plastered surface to prepare the surface even and smooth complete all as specified and directed.Note :- After applying putty on wall surfaces over plastered surfaces are required to rubbed with sand paper to obtain smooth and level surface for which rates are deemed to be included. |
| 12 | M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces and priming with chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed. |
| 13 | M & L for two coats or more coats of 100% exterior Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 14 | M & L for complete removal of existing treatment andtwo coats or more coats of 100% exterior Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 15 | S&F superior qualitySSCurtain rod, 20mm diawith and includingSS bracket 2 Nos of each opening andfancy type SSside knob of required shape and size 2 Nos of each opening as approved by GE and complete all as specified and directed. |
| 16 | Providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 17 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 18 | M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 19 | Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 21 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed. |
| 22 | Cutting holes into or through cement concrete slabs and cutting through reinforcement chajjas, etc reinforced or other wise surfical area n.exc 100 sqcm as directed to insert angle iron for holding chajjas / coller platforms as required complete all as specified and directed. |
| 23 | S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated), for cooler stand, chajjas complete all as specified and directed. |
| 24 | M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint, primimg with red oxide complete all as specified and directed. |
| 25 | M&L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 26 | Excavation in trenches n.exc 1.50 wide and n.exc 1.50 deep and getting out in soft/loose type ofsoil complete all as specified and directed. |
| 27 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed. |
| 28 | M&L for precast RCC Nominal mix Type B0 1:2:4, 12.5mm graded aggregate as in Cover slab including necessary formwork complete all as specified and directed. |
| 29 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 30 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 31 | S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 32 | S&F 5mm thick hollow PVC wall panelling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC \"L\"and U section for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls and including dismantling old panelling /lining etccomplete all as specified and directed. |
| 33 | S&F 5mm thick Solid PVC Wall Lining (water proof fluted wall panelling type) consisting of 5mm thick wood grain of any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing from site complete all as specified and directed. |
| 34 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing fron site complete all as specified and directed. |
| 35 | Dismantling old unserviceable kitchen cupbord shutter with frame complete all as specified and directed. |
| 36 | S & F 18 mm thickPVC solid board for making modular kitchen cabinet cupboard with partition and door of approved make : Rajshri or equivalent complete all as specified and directed. |
| 37 | S & F SS plate rack(size- 45 Cm x50 Cm x 20 Cm /4mm dia SS rod)with necessary fitting like slider etc complete all as specified and directed. Make - Hettch or equivalent. |
| 38 | S & F SS Crockery rack (size- 45 Cm x50 Cmx 20 Cm /4 mm dia SS rod with necessary fitting like slider etc complete all as specified and directed. Make - Hettch or eqauivalent. |
| 39 | S & F SS bottle rack (size-25 Cm x 50 Cmx45 Cm/ 4 mm dia SS rod) with necessary fitting like slider etc complete all as specified and directed. Make - Hetch or equivalent. |
| 40 | S&F self clossing hinges hinges 75 mm long complete all as specified and directed |
| 41 | S& F 100 long SS fancy type handle complete all as specified and directed |
| 42 | S& F in repairs 100 long SS fancy type handle complete all as specified and directed |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors, wallsaprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 44 | M& L 20 mm thick Granite of any type work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 10 mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 45 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified and directed. |
| 46 | M&L for sand cushioning layer for laying PCC interlocking paver block complete all as specified and directed. |
| 47 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | M&L Vitrified dark shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, and not exc 1 sqm in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 49 | M&L for Vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles not exceeding 1 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 50 | M&Lglazed ceramic coloured, designer & pattern (dark & light shade combination) tilesin450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxyto match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 51 | M&L exterior brick/stone facade tiles (digital wall tiles for elevation) of size n.exc 0.50 Sqm as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and including taking down complete all as specified and directed. |
| 52 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposedincluding cleaning for refixing or removal to store complete all as specified and directed. |
| 53 | Description all as per item 52.00 above but here-in-after 20mm complete all as specified and directed. |
| 54 | Supply & Laying of CPVC pipe, SDR 11, 20mm outer dia & fittings on walls/ceiling or laying in floors, including taking down old pipe complete all as specified and directed. |
| 55 | S&F Brass Elbow forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 56 | S&F Brass Tee forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed. |
| 57 | Supply & Laying of CPVC pipe, SDR 11, 25mm outer dia & fittings on walls/ceiling or laying in floors, including taking down old pipe complete all as specified and directed. |
| 58 | S&F Brass Elbow forspecial fitting of25 mm bore CPVC pipe complete all as specified and directed. |
| 59 | S&F Brass Tee for special fitting of25 mm bore CPVC pipe complete all as specified and directed. |
| 60 | S&F Male Brass threaded Adaptor Tee forspecial fitting of25 mm bore CPVC pipe complete all as specified and directed. |
| 61 | S&F in repair vitreous china one piece WC with 10 ltrs capacity flushing cistern floor mounting frame, installation kit, drain pipe connection set, including necessary cutting to wall / floor making good complete all as specified and directed. |
| 62 | S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. Make Jaquar cat pat No MQT-519KN |
| 63 | S&F CP Central Hole Basin Mixer with Popup waste with 450 mm long Braided Hoses complete all as specified and directed. Make Jaquar Cat pat No COS-101051B |
| 64 | S&F in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | S&F in repair 15 mm bib two way tap (fancy type) with wall flange, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make Jaguar Cat pat No MQT -512ANKN |
| 66 | S&F in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 67 | S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed. |
| 68 | S&FSS, premium type, peg set 6. heavy weight complete all as specified and directed. |
| 69 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 70 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 71 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 72 | S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clampscomplete all as specified and directed. |
| 73 | S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 74 | S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 75 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 76 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 77 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 78 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed. |
| 79 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers complete all as specified and directed. |
| 80 | S&F designer counter table top wash hand basin with cabinet , any colour, flat back of size 600 x 500 mm excluding taps, and plug and porcelain stopper but including PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 81 | S&F in repair CP soap dishfixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 82 | S&F in repair corner glass shelf 300mm (with brass brackets)along with CP railing complete all as specified and directed. |
| 83 | S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw complete all as specified and directed. |
| 84 | S&F in repair Health Faucet with hose & hook complete all as specified and directed. |
| 85 | S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. |
| 86 | S&F in repair Towel Ring Round with Round Flange complete all as specified and directed. |
| 87 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters(W/out taking off shutters from the frames) complete all as specified and directed. |
| 88 | S&F made single extruded WPC (Wood PolymerComposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 89 | S&F factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 90 | S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed. |
| 91 | S&F extruded aluminium alloy, anodised, sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 92 | S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed. |
