|
| 1 | Surface excavation n .exc 30 cm deep and averaging 15 cm deep and getting out as in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Hard/ dense soil complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated material/soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed |
| 5 | M & L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 6 | M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed. |
| 7 | M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 8 | M & L Treating the soil under plinth protection at the rate of5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 9 | M & L Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 10 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, .complete all as specified and directed. |
| 11 | M & L RCCM30 ( 20 mm graded aggregates) (Design Mix) asin foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 12 | M & L for RCCM 30 (20 mm graded aggregate)(Design mix) as in Columns, pillers, peir, posts, and struts complete all as specified and directed. |
| 13 | M & L forRCCM 30 (20mm graded aggregate) (Design mix) as in Beams , cantilivers , bressummers , lintles over 1.5 M span complete all as specified and directed. |
| 14 | Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in verticalsurfaces complete all as specified and directed. |
| 15 | Use and waste form work rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars etc complete all as specified and directed. |
| 16 | Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc complete all as specified and directed. |
| 17 | S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 18 | Description all as per ser item No 17 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc. |
| 19 | M&L brick work with sub class \"B\" modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M & L rendering15 mm thick intwo layers of10 mm thick inbottom and 5 mm thick with WPC oftop layerin Cement Mortar 1:4 on Fair Faces of Brick Wall, Cementblock wall or on Concrete Surfaces, SurfaceFinished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately) |
| 21 | M&L for 10 mm thick rendering on brick work or concrete surfaces of internalwall in cement mortar 1:6 surfacecomplete all as specified and directed. |
| 22 | M & L Preparation of newly plastered surface and apply two coat of cement base paint over coat of wall primer complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surface and applying two coat of distemper oil emulsion OBD white or tinted in wall internally complete all as specified and directed. |
| 24 | M & L 100 mm thick PCC1:4:8 type D-2 using 40 mm graded stone aggregate as insub base forflooring complete all as specified and directed. |
| 25 | M & L Cement concrete 25 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in level course complete all as specified and directed. |
| 26 | M & L 25mm thick Damp proof course to horizontal or vertical surfaces in cement mortar 1:2:4including necessary formwork complete all as specified and directed. |
| 27 | M & L applying evenly a coat of blow type bitumen at the rate of 1.50kg per square metre and blinding with clean dry sand @ 0.05 cu.m per sq. m complete all as specified and directed. |
| 28 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 29 | M&L for glazed ceramic coloured tile for vertical surfaces of size 450x 350x 7 mm/ 300x200x6mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to matched including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 30 | M & LAnodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling all as specified and directed. |
| 31 | M & L for providing and fixing gpsum board 12mm thick in ceiling fixed with screw as per manufactures instructionscomplete all as specified and directed. |
| 32 | M&L for pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as spd and directed |
| 33 | S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 34 | M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink preimer complete all as specified and directed |
| 35 | M&L Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as spd and directed. |
| 36 | M&L for 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 37 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple 250 mm long (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 38 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor (140mm size) complete all as specified and directed |
| 39 | S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 40 | S&F 100mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. |
| 41 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified. |
| 42 | M & Lfor preparation of new steel surfaces of any descriptionover 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed. |
| 43 | Supply only integral water proofing compound |
| 44 | S&F mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing welded (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as spd and directed. |
| 45 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates for welded ( Fe 410-W (Gde E-250) quality A) complete all as spd and directed. |
| 46 | S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde- E- 250) quality- A, complete all as spd and directed. |
| 47 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 48 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 49 | M&L for 150 mm thick Hard core of broken stone/boulder , broken to gauge n exc 63 mm. |
| 50 | M&L75 mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as inplinth protection etc complete all as specified and directed. |
| 51 | Excavating over areas, n exc 1.5 m deep and getting out in soft and loose soil complete all as specified and directed. |
| 52 | M & L for 100mm thick cement concrete type C2 (1:3:6) (using 40mm graded aggregate) complete all as specified and directed. |
| 53 | M & L for 50mm thick sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed. |
| 54 | M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement no pigment complete all as specified and directed. |
| 55 | M & L Providing, cement concreteTyoe B-1 using 20mm graded aggregate (1:2:4)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 56 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 57 | M & L 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified anddirected |
| 58 | Dismantling plain or corrugated steel sheeting, any guage, thickness as specified. |
| 59 | Dismantling unframedtimber scantlings 40 sq. cm and over in section, in any position as specified. |
| 60 | M & L Second class soft-wood in wrought scantlingscomplete all as specified and directed |
| 61 | Taking down cement plaster or brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water all as specified and directed |
| 62 | M&L 15mm thick rendering on fair faces of brick work or concrete sufaces in CM 1:4 including finishing even and smooth without using extra cement and by mixing WPC @3% of Cement Constant complete all as specified and directed. Note WPC used will be measured and paid separately. |
| 63 | M&L 15mm thick rendering on fair faces of brick work or concrete sufaces in CM 1:6 including finishing even and smooth without using extra cement all as specified and directed |
| 64 | M&L preparation of plastered or uplastered new surfaces on walls and applying two coats of oil bond distemper on walls over 3mm thickof wall putty all as specified and directed |
| 65 | Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete and all as specified. |
| 66 | Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm each complete and all as specified. |
| 67 | S&F plain , solid , straight chowkhat and frames , wrought , framed rebated on the solid, rounded or chamfered, puttogether with glue pinned at joints in 2nd class Hard wood complete all as specified. |
| 68 | S&F factory made 35 mm thick2nd class Hard Wood of plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged), or of veneered particle board medium density or particle board with commercial both face complete all as specified. |
| 69 | S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including hacking out of glass panes complete and all as specified and directed |
| 70 | S&F Aluminium handles, cast type anodised 150mm size complete all as specified |
| 71 | S&F Stainless steel wire cloth.0.56 mm normal dia of wire and average width of aperture 1.40 mm complete and all as specified and directed |
| 72 | Demolition cement concrete in ground floors and pavings n.exc 15cm thickness(below or above ground level) of any description and in any position not otherwise for complete all as specified and directed. |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises as specified and directed |
| 74 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6)complete all as specified and directed. |
| 75 | S&F 1stclass hard wood 35mm thickness Glazed and skeleton shutters ( Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all a specified and directed. |
| 76 | Demolition of Stone slab and tiles of any description or thickness in floor and laid in dry complete all as spd and directed. |
| 77 | Demolition of brick work or stone masonry in cement morter complete all as spd and directed. |
| 78 | M & LBrickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete and all as specified and directed |
| 79 | M & L Complete removal of existing treatment of walls and appling 3mm thick wall putty and two coats of oil bound distemper complete all as specified and directed. |
| 80 | M&L Chequered cement concrete tiles of Glossy finish of size 20cmx20cmx25mm thick set jointed and pointed in neat cement slurry in floorswith grey cement and pigment complete all as specified and directed. |
| 81 | M & L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm gradedstone aggregate) insub base finishing the surface even and smooth complete all as specified and directed |
| 82 | M & L prep of old painted wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth of old surfaces applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 83 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all a specified and directed. |
| 84 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,complete all as specified and directed. |
| 85 | Taking up or down steel tubing 15mm and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 86 | M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 87 | M&L for vitreous China squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed (Make : Hindware or equivalent) |
| 88 | M&L for 100 mm thickPCC 1:2:4 B2 type using 40 mm graded aggregate for Surface channels and drains and finished even & smooth with using extra cement all as specified. |
| 89 | M&L for rendering 15 mm thk in CM 1:4 on brick,stone or concrete wall surfaces of any description ,and finishing the surfaces finished even and fair complete all as specified and directed. |
| 90 | M & L Providing, cement concrete (1:2:4)type B-1(using20 mm graded agg)in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 91 | M&L for RCC 1:1.5:3 B1 type using 20mm stone aggregate (nominal mix) as in culvert slabs and the like all as specified and directed by engineer in charge. |
| 92 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor labs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)in rough finished flat surfaces of concrete complete all as specified and directed. |
| 93 | Excavation in post holes (or similar holes) each n.exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed. |
| 94 | M & L for mild steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified and directed |
| 95 | S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe410-0 or Fe 310-O complete all as specified and directed. |
| 96 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity complete all as specifie and as directed. |
| 97 | S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specifie and as directed. |
| 98 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specifie and as directed. |
| 99 | S&F 20mm dia GI Tubes, `medium grade\" with all fitting and fixed complete to walls or laid in floors complete all as specified and directed. |
| 100 | S&F 15mm dia GI Tubes, `medium grade\" with all fitting and fixed complete to walls or laid in floors complete all as specified and directed. |
| 101 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like |
| 102 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete |
| 103 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 104 | Material & labour for point wiring complete with singlecore 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH)drawn through and including PVC surface conduit 19/20 mm bore (ISI marked) and accessories , terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum)fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly for One light point/Fan poink/Exhaust fan controlled by one way switch 5 Amps complete all as specified and directed complete all as specified. |
| 105 | Description all as per ser item No 104 above but socket out let 3 pin, 5 Amp on independent board complete all as specified and directed. |
| 106 | Description all as per ser item No 104 above but with 2.5 sqmm copper conductor cable for socket out let 3 pin, 15 Amp on independent board with other switch. |
| 107 | Supply and fixing Switch piano, flush type 5 Amps, 240 V One Way complete all as specified and directed. |
| 108 | Supply and fixing switch socket combination 5 Amps 2 in 1 flush type multipurposes for independent board complete all as specified and directed. |
| 109 | Supply and fixing switch socket combination 16 Amps 2 in 1 flush type multipurposes for independent board complete all as specified and directed. |
| 110 | Supply and fixing Ceiling Rose 3 terminal size 50 x 65 mm surface type complete all as specified and directed. |
| 111 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 112 | S&F 1x20 W LED 6000K (4 ft) decorative ultra slim sqare profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp. |
| 113 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers |
| 114 | Supply and Fixing of wall mounted fan 300 mm sweep, > 1330 RPM, > 45 CFM suitable for 220/ 230 V AC, 50 Hz supply complete with all acessories as specified. |
| 115 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and directed. |
| 116 | Supply and fixing of Single Pole and Neutral, Single Door, 240 V, 8 way Sheet Metal Enclosure for MCBs complete all as specified and directed. |
| 117 | Supply and fixing of SPN 32 Amp, 240V, 10KA \"C\" curve miniature circuit breaker (MCB) complete with connection testing and commissioningcomplete all as specified and directed. |
| 118 | Supply and fixing of SP 5 to 32 Amp, 240V, 10KA \"C\" curve miniature circuit breaker (MCB) complete with connection testing and commissioningcomplete all as specified and directed. |
| 119 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 120 | M&LRiver sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed by Engr-in-Charge.Note :- For payment purpose punned thickness shall be measured |
| 121 | M&Lfor brickwell burntlocallyavailablesubclass \"B\" laid over sand cushioningtocableintrencheskeepingwidthofbrickparalleltothelengthofcable complete allasspecifiedanddirected. |
| 122 | M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 Core |
| 123 | Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface |
| 124 | Taking down and M& L for Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC casing & cappingin wall/ceiling with including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaustpoint/ bell point controlled by one switch 5Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) Note:- (a) wiring shall be done by using colur cording (b) Earth wire shall be of green colour. |
| 125 | Description all as per ser item no 124 above but 5Amp socket outlet on same boardcomplete all as specified and directed by Engr-in-chage. |
| 126 | Description all as per ser item no 124 above but 5Amp socket outlet on independant board all as specified and directed by Engr-in-charge. |
| 127 | Description all as per ser item no 124 above but for one socket outlet 15 Amps on independant board using cable 4sqmm for phase,neutral and earthingcomplete all as specified and directed by Engr-in-chage. |
| 128 | Description all as per ser item no 124 above but 5Amp socket outlet on independant board all as specified and directed by Engr-in-charge. |
| 129 | Description all as per ser item no 124 above but for one socket outlet 15 Amps on independant board using cable 2.5 sqmm for phase,neutral and earthingcomplete all as specified and directed by Engr-in-chage. |
| 130 | S& F of Sheet metal enclosure Doubledoor for DBs when MCBs to be used SPN-8 way, 230 volts with 200 Amp rated bus bar IP 43/54, IS 8623 complete all as specified and directed. |
| 131 | S&F in repairs for MCB SPN 32 Amps, 240 V 10KA \"C\" curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 132 | S&F in repairs for MCB SP 6 TO 32 Amps 10 KA 240 V \"B\" curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 133 | S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type complete all as specified and directed. |
| 134 | Supply and fixing in repair Switch piano, flush type 5 Amps, 240 V One Way complete all as specified and directed. |
| 135 | S&F in repairs of socket outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type complete all as specified and directed. |
| 136 | S&F in repairs of switch socket combination outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type. |
| 137 | S&F switch socket combination outlet 6/15 Amps 5 in one flush type complete in independant board all as specified and directed by Engr-in-charge. |
| 138 | Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen \"A\" clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size as specified and directed. |
| 139 | Taking down and M&L Sub main wiring complete with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed,6 sqmm, two run 1100 volts grade, incl drawn through PVCsutable size conduit and 4 sqmm single run for earthing. |
| 140 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm, 2 core nominal cross section in service connections. |
| 141 | Supply and fixing of Single Pole and Neutral, Single Door, 240 V, 4 way Sheet Metal Enclosure for MCBs complete all as specified and directed. |
| 142 | Supply installation testing and commissioning of 500 Ltr kerosine/Diesel based HOT water plant with fuel tank and accessories with 500 Ltr water heater boiler having capacity of 35000 Kcal/hr oil fires with thermostat one inch thick glass wool insulated, automatic air release valve, oil burner, MS oil storage tank of 200 Ltrs capacity with powder coated outer body complete all as specified and directed. |
| 143 | Supply and installation of MS flue gas exhaust pipe made out of 3 mm thick MS sheet, minimum 1.2 m above the highest point of the plant room and including connection from Hot Water generator to main vertical exhaust pipe fabricated from 3 mm MS sheet. The item shall be complete with the mounting/ fixing arrangement. The Hot Water generators shall be connected to an independent flue gas exhaust pipe of suitable size and as per manufacturers guide lines.The portion of the flue gas exhaust pipe inside the building shall be insulated with fiber glass insulation wool of 24kg/cum with aluminum cladding. The item shall be complete with mounting/fixing arrangement |
| 144 | S&F3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenchesof size20 mm ,complete all as specified. |
| 145 | S&F3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenchesof size 25mm ,complete all as specified. |
| 146 | S&F Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm dia complete all as specified and directed. Make : Jaquar/Prayag or equivalent |
| 147 | M&L for cutting the existing GI Tubing of size 50mm dia for taking new connection of 25/40 mm dia PPR pipe complete with all fittings all as specified and directed |
| 148 | S&F automatic voltage stablizer for low and high voltage connected equipped with electronic transistors relay suitable for connection of single phase, 50 Hz AC supply complete with voltmeter and designed for input voltage 170-220 Volts of capacity and output voltage stablized 230 Volts (+/-) 2.5% ) of capacity 01 KVA. |
| 149 | M&L for rotational mounted polythelene water storage tank tripple layer with closed hoisted and fixed in position of 500 Ltrs capacity complete all as specified and directed. |
| 150 | S&F ball valve with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe suitable for 25 mm bore complete all as specified and directed. |
| 151 | Supply, laying, testing and commissioning of LT under ground cable XLPE insulated armoured, heavy duty, elelctric cable,size 16 Sqmm 2 Core with stranded aluminium conductor, 1100 Volts grade conforming to IS -7098 (Part-I) 1988 laid in trenches /walls/floors /ducts etc fixed with saddle and clamps or passing through pipes complete with cable ends connection with proper thimbles nut bolts washer all as directed . Make : Polycab/Havells |
| 152 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVCconduit 20mm dia medium Grade concealed in walls/roof/floorsall as directed by Engineer in Charge.Notes:- (i) Two wires of 4 sqmm and one wire of 4 sqmmand one run of PVC conduit shall be measured as one unit. |
| 153 | Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor for hot water supply of 32Mtr head Range Discharge /700 LPH complete with accessories including, pressure gauge,NRV,pressure cutout switch, pressure tank, cement concrete foundation and all as specified and directed . (Note:- Pump should be fitted with mechanical seal and operative under temperature between 60⁰C to 75⁰C) |
| 154 | Notes :- Amount of Credit Schedule for Schedule \"A\" Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum |
