|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed. |
| 2 | M&L for Brick work with old size sub-class \"B\" bricks, straight or coverd on plan exc 6 m mean redius, built in Cement Mortar 1:6, complete all as specified and directed. |
| 3 | Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises, complete all as specified and directed. |
| 4 | M&L forNon Skid ceramic tiles coloured300mmx300mmx 7to 8 mm thick (square/ rectagular) area of eachin floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match including 15mmthick screed bed layer in CM (1:6) for lying floor finish etc, completeall as specified and directed. |
| 5 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 300x7 mmthick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc, complete all as specified and directed. |
| 6 | M&L for Light/Dark shade Vitrified Ceramic colouredtilesof size of tiles n exc .36 Sqm (square/ rectagular) polished,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mmthick screed bed layer in CM (1:6), complete all as specified and directed. |
| 7 | All as per Item No 6.00 above but as in skirtingset & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 8 | Demoliton of cement concrete (un reinforced) of any description and in any position not other wise specifically provided, complete all as specified and directed. |
| 9 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor finish, complete all as specified and directed. |
| 10 | M&L for 75 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded crushed stone aggregate as in sub base, complete all as specified and directed. |
| 11 | M&L for sand filling under floors or in foundations incl watering and consolidation, complete all as specified and directed. |
| 12 | M&L for Machine pressed precast conctete interlocking paver block with grey cement & no pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed. |
| 13 | M&L for cement concreteType-B-1, 1:2:4 using 20mm graded crushed stone aggregate as in Bed blocks, copings, path etc incl necessary formwork, complete all as specified and directed. |
| 14 | M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.18 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4), complete all as specified and directed. |
| 15 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even, complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair andmixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid) external surface, complete all as specified and directed. |
| 18 | M&L for Liquid water proofing compound as per latest IS specification, complete all as specified and directed. |
| 19 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even, complete all as specified and directed. |
| 20 | M&L for repair to chajja upto height of bldg 9.00 mtr, area not exc 1.00 Sqm with 15mm thick in cement mortar 1:4 on faces concrete surfaces, finished fair and even incl benching with PCC 1:2:4 using 12.5 mm aggregate using water proofing compound @ 3% by weight of cement as per manufacturer instructions complete all as specified and directed. (Note: water proofing compound shall be measured and paid seperately under respective item), complete all as specified and directed. |
| 21 | M & L for applying three coats of white wash on ceiling incl preparation of new plastered surfaces, complete all as specified and directed. |
| 22 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over 1 mm thick wall care putty, complete all as specified and directed. |
| 23 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed. |
| 24 | M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying two coat of white wash, complete all as specified and directed. |
| 25 | All as per Item No 24.00 above but on ceiling, complete all as specified and directed. |
| 26 | M&L for Preparation of old decorated surface of wall incl cornice etc and applying one coat ofoil bound distemper in any colour as approved, complete all as specified and directed. |
| 27 | All as per Item No 26.00 above but two coats of oil bound distemper in any colour on wall, complete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including 1 mm thick wall care putty, complete all as specified and directed. |
| 29 | All as per Item No 28.00 above but on ceiling, complete all as specified and directed. |
| 30 | M&L for preparation of old treated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 31 | All as per Item No 30.00 above but on steel surface, complete all as specified and directed. |
| 32 | M&L for brooming down plastered/unplastered old decorated surface of walls and applying one coat of cement base paint, complete all as specified and directed. |
| 33 | M&L for brooming down plastered/unplastered old decorated surface of walls and applying two coat of cement base paint, complete all as specified and directed. |
| 34 | M&L for Preparation of old decorated concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applyhing one coat of synthetic enamel paint, complete all as specified and directed. |
| 35 | M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent saltand treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint), complete all as specified and directed. |
| 36 | M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1 mm thick wall care putty, complete all as specified and directed. |
| 37 | M & L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint, complete all as specified and directed. |
| 38 | M & L for complete removal of existing treatment and applying 1 mm thick wall care putty with two coat plastic emulsion paint, complete all as specified and directed. |
| 39 | M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm height, complete all as specified and directed. |
| 40 | M&L for preparingold decoratedplastered or unplaster surfaces of walls, wall projection of face of chajja, projected face of roof slab and face and sides of sunshade etc. By brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and effloroscent salr and treating oil and greese spots and applying one coat of weather proof paint (exterior emulsion paint) in camouflage pattern using mechanical means (two or more combination design, pattern and colour shall be as approved by GE or as per existing cover new plaster surfaces of walls, complete all as specified and directed.Note : Building Height Up to 8.20 Mtr. |
| 41 | M&L for preparingold decoratedplastered or unplaster surfaces of walls, wall projection of face of chajja, projected face of roof slab and face and sides of sunshade etc. By brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and effloroscent salr and treating oil and greese spots and applying two coat of weather proof paint (exterior emulsion paint) in camouflage pattern using mechanical means (two or more combination design, pattern and colour shall be as approved by GE or as per existing cover new plaster surfaces of walls, complete all as specified and directed.Note : Building Height Up to 8.20 Mtr. |
| 42 | Resecuring or easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each, complete all as specified and directed. |
| 43 | Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening including welding etcexc 1 Sqm and n.exc 2 Sqm, complete all as specified and directed. |
| 44 | S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 45 | S&F in repair 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 46 | S&F in repair 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 47 | S&F in repair 100 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 48 | S&F in repair 300mm mild steelordinary rat tail rod pattern spring including roller and roller plate fixed as in repairs including taking down the unserviceable existing, complete all as specified and directed. |
| 49 | S&F in repair Stainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed as in repair including taking down the unserviceable existing, complete all as specified and directed. |
| 50 | Hacking out old broken glass ( any thickness) size quality etc from any frames fixed with pin, beading or oil putty, complete all as specified and directed. |
| 51 | Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty or beadingin square n.exc 0.5 Sqm in each panes, complete all as specified and directed. |
| 52 | All as per item No. 51.00 above but 4.8 mm thick tinted glassin square exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 53 | All as per item No. 51.00 above but figured glass 4mm thick, complete all as specified and directed. |
| 54 | S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc, complete all as specified and directed. |
| 55 | S&F in repair20 mm dia stainless steel of grade 304 drapery rod cut to size and fixed in position including brackets, end Knobs, and knobs fixed to wall, complete all as specified and directed. |
| 56 | Material and labour in reapair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair, complete all as specified and directed. |
| 57 | S&F in repair 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd, complete all as specified and directed. |
| 58 | S&F in repair 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd, complete all as specified and directed. |
| 59 | M&L in repairs 100 mm long mild steel handle for steel window, complete all as specified and directed. |
| 60 | Taking down existing aluminium door and re-fixing the same after replacement of rubber beads, lock, door stoper, Handles etcandminor repairs in Hydrolic door stoper or adjustments and refixing thetaken glass etc., complete all as specified and directed. |
| 61 | S&F in repair for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 62 | S&F in repair 32mm dia PVC flush pipe for low level flushing cistern long type, complete all as specified and directed. |
| 63 | S&F in repair 15 mm bore (concealed) stop cock ISI marked, cast copper alloy, screwed down, high pressure, fancy type, chromium platedhandle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 64 | S&F in repair Brass chromium plated shower rose 125mm size with shower arm including Nipple, socket and other fittings etc., complete all as specified and directed. |
| 65 | M&L for 15mm diapillar taps CP brass with crutch or butterfly handlescrewed down, screwed for iron pipe or for brass ferrule and fixed as in repair including taking out the existing pillar tap, complete all as specified and directed. |
| 66 | S&F in repair 15mm dia Bib taps chromium plated fancy type cast copper, with crutch or butterfly handle screweddown, screwed for Iron pipe or for brass ferrule, complete all as specified and directed. |
| 67 | S&F in repair 15mm dia stope valves/angle cockfancy type chromium plated with long shank and cup cast copper alloyscrewed down, high pressure withcrutch or butter fly handle screwed both ends for iron pipe, complete all as specified and directed. |
| 68 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified. |
| 69 | S&F in repair towel rail 600 mm long and 20mm diaof CP fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 70 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms), complete all as specified and directed. |
| 71 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 72 | S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 73 | S&F in repair 25mm bore flush cock half turn brass chrominium plated with adjustable flange, complete all as specified and directed. |
| 74 | S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. |
| 75 | S&F in repair 15mm dia PVC connection of length 450mm fixed as in repair including taking out the existing unserviceable, complete all as specified and directed. |
| 76 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as speified and directed. |
| 77 | S&F in repair of PVC waste pipe 32mm dia, 90 cm long for wash hand basin/sink/urinal,complete all as specified and directed. |
| 78 | S&F in repair of PVC waste pipe 40mm dia, 90 cm long for wash hand basin/ sink/ urinal, complete all as specified and directed. |
| 79 | S&F in repair waste coupling of PTMT (half or full thread), 32mm dia with minimum weight 45 gm, complete all as specified and directed. |
| 80 | S&F in repair waste coupling of PTMT (half or full thread), 40mm dia with minimum weight 60 gm, complete all as specified and directed. |
| 81 | S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including steel painting and making good disturbed surface, complete all as specified and directed. |
| 82 | Supply & Fixing in repair PVC Syphon kit suitable for PVC Cistern, complete all as specified and directed. |
| 83 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug,CP weast cuppling , washers waste pipe, cast iron cantilever brackets, connecting union overall size 914mmx460mm with bowl size 405mm x 354mm x 203mm, complete all as specified and directed. |
| 84 | S &F in repair Stainless steel plate rack of size 600 x 750 x 250mm thickness 0.80mm, complete all as specified and directed. |
| 85 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms, complete all as specified and directed. |
| 86 | S&F in repairPVC cover (Lid) for OHT of capacity 500/1000 Ltr, complete all as specified and directed. |
| 87 | Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mmGI union and checked nut etc, complete all as specified and directed. |
| 88 | Fixing only Rotational moulded polythene triple layer water storage tanks, hoisted and fixed in position 500ltrs capacity including 2 Nos GI union, checked nut and 20mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia, 2 Nos nipple, complete all as specified and directed including taking down old PVC tank. |
| 89 | S&F of Rotational moulded polythenewater storage tanks , hoisted and fixed in position 1000ltrs capacity includin GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including taking down old PVC tank, |
| 90 | S&F of Rotational moulded polythenewater storage tanks, hoisted and fixed in position 500ltrs capacity includingGI union, checked nut and 20mm PTMT float Valve,complete all as specified and directed including dismantling of old PVC tank and removing to store. |
| 91 | Labour only opening of air lock in toilets/ bath and kitchen but excluding fittings, complete all as specified and directed. |
| 92 | M&L for 15mm dia GI tubing medium grade with all fittings, fixed as in repair to walls, ceiling or laid under floors including taking down unserviceable existing line, complete all as specified and directed. |
| 93 | All as per item No. 92.00 above but 20 mm dia, complete all as specified and directed. |
| 94 | S&F in repair Grating doom 100mm dia of CP, complete all as specified and directed. |
| 95 | Repair only to CPlong body bib taps , pillar tab,bib tap, etc of any makeby replacingspindle, nipple, washer, knob etc at any size etc, complete all as specified and directed. |
| 96 | Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc., complete all as specified and directed. |
| 97 | S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps, complete all as specified and directed. |
| 98 | S & F in repair 75mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps, complete all as specified and directed. |
| 99 | Supply and fixing in repair 110mm PVC (SWR) bends or elbowof any radius, complete all as specified and directed. |
| 100 | Supply and fixing in repair 75mm PVC (SWR) bends or elbow of any radius, complete all as specified and directed. |
| 101 | M&L for filling white cement on floor/wall tiles joints including removing old fillings etc, complete all as specified and directed. |
| 102 | S&F in repair Solid PVC Wall Lining (wall Panelling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and PVC Frame (if required) and fixing at site on PVC frame as per specifications, complete all as specified and directed. |
| 103 | Fixing only in repair PVC flushing cistern, flushing pipe including all fittings etc, complete all as specified and directed. |
| 104 | Fixing only in repair stainless steel sink of any size with coupling including white cementing along wall side etc, complete all as specified and directed. |
| 105 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 106 | M&L 18-20 mm thick granite work table rubbed and polished in steps jambs pillars window cills, cooking platform and like in cement mortar 1:4 thick including pointing in white cement(1:2) using marble dustwith admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 107 | Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 108 | Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames), complete all as specified and directed. |
| 109 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed. |
| 110 | S&F of Mild steel framed workas in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-290 gde E165, complete all as specified and directed. |
| 111 | S & F of Aluminium (powder coated) sliding glazed shutter of suitable size with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading andlocking arrangement at both end all as specified and as shown and drawing. Notes : (i) Frame, Glass filling in panels to windowsshall be measured and paid for separately under respective item. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv)Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2. |
| 112 | S & F Aluminium powder coated door shutters type with top rail lock rail, bottom rail, styles etc including joining cleats, glazing clip, gasket, beading with locking arrangement, complete all as specified and directed.Notes : (i) Frame, glass and particle board panel shall be measured and paid for separately under respective item of schedule \"A\" part V.(ii) Frame floor spring, builder hardware shall be measured under of schedule \"A\" part IV.(iii) Aluminium section of shutter shall be as per Drg No. CE/ALD/TD-224 sheet No. 1/1. |
| 113 | Supply 5.5 mm thick sheet glass ordinary quality any size and in any type of frame and glazing withrubber beading in square exc 0.5 Sqm in each panes, complete all as specified and directed. |
| 114 | S&F for powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron). |
| 115 | Supply only 3.0 mm thick ACP exc 0.5 sqm each to fixed on aluminium frame, complete all as specified and directed. |
| 116 | S&F of Rebated mortice aluminium lock verticle type size 100mm with 4 levers,complete all as specified and directed. |
| 117 | M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exceeding 1 Sqm and N exc 1.5 Sqm and cleaning the surface and applying cement slurry and 10mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer@ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate, supply & fixing new vitrious china Wated Closet pan orrisa pattern, size 580x440mm with integral foot rest excluding flushing cistern & flush pipe, complete all as specified and directed.Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed. |
| 118 | S&F of Providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre W Reinforced Gypsum) false ceiling tiles of pe Size 595 x 595 mm of approved texture, 12 design and patterns having moisture mi content less than 2%, humidity resistance ed- of 99%, NRCO.50 to 0.75 as per IS:8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 X 32 mmn of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) te 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L -shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mn center to Center and 4Omm long dry wall wood screws, The work shall be Carriod out as per specifications, drawing and asper directions of the Engineer-in- Charge including removal of existing falseceiling. |
| 119 | Supply and fixing in repair vitreous china squatting panOrissa pattern, size 580 x 440mm,(excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan, complete all as specified and directed. |
| 120 | Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe)and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device. |
| 121 | Supply and fixing (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper butincluding pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MSbrackets including cutting for and pining in ends of brackets, complete all as specified and directed. |
| 122 | Dismantling of boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 123 | S&F for PVC cabinet frame of size 18mm x75mm made out of 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality rudrak colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners, complete all as specified and directed. |
| 124 | S&F of PVC cabinet box and shutter made out of 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 qualityrudrak colour one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame, complete all as specified and directed. |
| 125 | S&F of Continous Piano Hinges of width 30 mm Stainless steel, complete all as specified and directed. |
| 126 | S&F of Stainless Steel Handle 100 mm length, complete all as specified and directed. |
| 127 | S&F 18-19 mm thick block board grade 2 quality interior grade quality,decorative type with decorative face veneer on oneface as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work, complete all as specified and directed. |
| 128 | S & F of solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube andfixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 129 | S & F of Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC`C`channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 130 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing, complete all as specified and directed. |
| 131 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete incl providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60 mm long brass screws,pointing around urinalback in cement, fixing flush pipe, complete all as specified and directed. |
| 132 | S&F of 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I. |
| 133 | S&F of 35 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side, complete all as specified and directed. |
| 134 | S & F of 100 mm But Hinges, medium weight cold rolled mild steel and fixed, complete all as specified and directed. |
| 135 | S & F of 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed. |
| 136 | S & F of 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 137 | S & Fof 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 138 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any descriptionexc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 139 | M&L for preparing new or previously untreated surfaces of steel materials of any descriptionexc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 140 | S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 141 | S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 142 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
