|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attachedpilasters,columns,piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets,coping,bedblocks,anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and fixing T-iron/ L- iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 10 | Finishing walls with water proofing cement paint of required shadeNew work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 13 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 200 x10 mm |
| 14 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 100 x10 mm |
| 15 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 250 x 16 mm |
| 16 | Providing and fixing ISI marked IS : 1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (copper oxidized as per IS: 1378) 125x65x2.12 mm |
| 17 | Providing and fixing ISI marked IS : 1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (copper oxidized as per IS: 1378) 100x58x1.90 mm |
| 18 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , including the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 19 | Providing and fixing 16 mm thick Polycarbonate Sheet on roofing with suitable screws etc complete. All the Joints should be leakproof and executed as per direction of Engineer -in- Charge |
| 20 | Providing and fixing PUF roof panelling 60 mm. The roof panels shall be madeof panel with 0.45 mm thick PPGI steel ribbed cladding on both side rigid CFC free Polyurethane foam of density 40 kg +/- 2kg/cum as insulation . The thickness of PU foam shall be 60 mm . The Panel will be jointed with can lock & tongue and groove aggrangement produced on discontinues panel production line . The PUF insulation material in the panelshall have fire retarding and self extinguishing property as per international standard with flammability BI Grade . The material required for manufacturingof panel will be new and will comply wuth relevant IS as applicable . The PUF insulation material used in the panels should conform to IS 12436-1988. The Panel will be of termite proof and Nil water absorption. The manufacture of PUF panel shall have test certificate /report for fire BS 476 chapter V.VI,VII from CBRI Roorkee for any sample of PUF panel, Each panel should be supplied prepainted with a colour coatingof 50 microns of architectural polyster ona min 175 gms/per sqm base of zinccoating on the finished surface for protection against scratches during handling and transporation. The Sheet shall be fixed using self drilling/ self tapping screws of required size with EPDM seal complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. |