|
| 1 | Description of items and specification ofwork to be excuted. |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | 30mm thick lime surkhi plaster in 1:1:1(1 lime: 1 surkhi :1 coarse sand) in two coats mixed with traditional bindingmaterial i.e. Gud, Belgiri and Babool gum including cleaning the surface and racking out joints and curing etc complete. |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil |
| 6 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. |
| 7 | Providing and laying lime concrete ofroof portion with 50% composite mortar 1:1:1 lime mortar (1lime:1surkhi :1coarse sand)and 20mm down gauge brick aggregate including beating with bamboo stick first & then with thaphi till the surface is harden to maintainthe proper slope & topsurface finishing etc complete in all respect. |
| 8 | RR stone masonry with 1:1:1 lime surkhi mortar (1lime : 1surkhi : 1coarse sand) mixed with adhesive material like Gud, Belgiri and babool gum including curing etc complete. |
| 9 | Providing and fixing 50mmthick avg Chajja stone as per original patteren in 1:1:1 lime surkhi sand mortar including chiseling, making grooves and jointing interlocking with SS clamps and anchoring pin at a height of 5 mtr etc complete in all respect. |
| 10 | Provision for repainting in engraving of fixed stone board with labour & material etc complete |
| 11 | Providing and fixing of wooden framed wire mess Jaali with Sagwan / teak wood support / planks to existing wire mess for avoid the entry of bats in the temple etc complete. (Size 1.20 x 2.0) |
| 12 | Providing and fixing double paitam stone doors frame/Chowkhat of approved quality in cement sand mortar 1:4 size 100 x 75mm. |
| 13 | Providing and fixing 40mm thick teak wood pannneled door on old patteren including old design iron nais, hold raft, chool, and iron Ring with one coat of termiguard and wooden polish etc complete including labour and material etc complete. |
| 14 | One or more coat Melamine polishing on old wooden door of painting room including scrapping and sand papering and preparing the surface smooth etc complete. |
| 15 | Conservation of fresco paintings in monuments by cleaning of the painted surface from all types of stains, dust, dirt, greasy & oily accretions etc. with the help of suitable chemicals, removal of cracks, consolidation of flaking paint layer and plaster, filling of the lacunae in the plaster, treatment of salt effect and altered paint layer retouching of the lost portions and providing a preservative coating. |
| 16 | Recess pointing in white cement mortar 1 : 2 (1white cement: 2 marble dust)including racking, cleaning and washing out joints and matching the original etc complete. |
| 17 | Recess pointing with 1:1:1 lime surkhi mortar (1lime : 1surkhi : 1coarse sand) mixed with adhesive material like Gud, Belgiri and babool gum including racking, cleaning and washing out joints with mixing hardener and colour pigment for matching the original etc complete. |
| 18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, handles, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 19 | Disposal of building rubbish / malba /similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ( In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works) (Size 1.0 x 2.0 ) |
| 21 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m Centre to Centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding with as per directions given by engineer-in-charge. |
