|
| 1 | Item No 01 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. |
| 2 | Item No 02 :- Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.s |
| 3 | Item No 03 :- Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 4 | Item No 04 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 5 | Item No 05 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thicknessreinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth andthickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimumsize and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thicknessand of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 6 | Item No 06 :- Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 7 | Item No 07 :- Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 8 | Item No 08 :- Providing and applying two coat of water based cement paint to un plastered concrete surface after cleaning the surface of dirt, dust, oil,grease, efflorescence etc. complete. (applying 1 litre paint on 2 sqmt) |
| 9 | Item No 09 :- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 10 | Item No 10 :- Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work andiron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). Please Enable Macros to View BoQ information |
| 11 | Item No 10 :- Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work andiron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). Please Enable Macros to View BoQ information |
