Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SCHEDULE A - CIVIL WORKS -Clearing scrub and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification |
| 2 | Dismantling removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge. |
| 3 | Dismantling brick work, Tile work, and Weathering Coarse manually or by using required mechinaries and disposal of unservice material within 50 meters lead as per direction of Engineer in charge. |
| 4 | Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive ofgiving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12\"to a depth of 8\" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth. Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12\" to a depth of 8\" around the building before laying the plinth projection.This holes has to be be closed after the treatment. |
| 5 | Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including \"C\" & \"U\" clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.For column etc. |
| 6 | For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 7 | Providing and Laying M25 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by theEngineer-in-chargeSecond Floor |
| 8 | Providing and Laying 50mm Screed Concrete in the ratio 1:3. Screed concrete installations should adhere to relevant British Standards like BS 8204-1:2003 and BS EN 13813. Rate includes all proper levelling, material, labour etc complete. |
| 9 | Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. |
| 10 | Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 ofmanufactured sand ) using Portland Pozzolana Cementstandard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest mouldingtechniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.Second Floor |
| 11 | Parapet Wall |
| 12 | Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 ofmanufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest mouldingtechniques etc. only shall be used. The rate including cost of all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.Second Floor |
| 13 | Plastering 12mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. |
| 14 | Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand)according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws.Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. |
| 15 | Plastering 15 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer\"s Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by theEngineer-in-charge. |
| 16 | Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour overone coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) |
| 17 | Supply and painting oftwo coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge.(Ceiling & Internal surface) |
| 18 | Supplying and painting of2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. |
| 19 | Supplying and laying of Flooring with Joint free Double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 10mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost ofall materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. (Including Skirting) |
| 20 | ProvidingAnti skid Ceramic tiles of size 305 x 305 x 10mm flooringapproved make and quality with plain/colourwith base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. |
| 21 | Supplying and fixing Dadooing the wall with Vitrified tiles of approved quality, colour and design joint free of size 600x600x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. |
| 22 | Supply & Laying with the best quality approved Italian Marble stone slab not less than 20mm thick and the size of slab in general not less than 1800 X 900 mm machine cut and machine high pre-polished set in C.M 1:4 20 mm thick with white cement sluury for surface contact of the bottom of the slab as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with Chemicals cutting, edge chamfering and polishing rough, medium nice and stone polish. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning acid wash over finished surfaces, protection with Gypsum / Pop layer over plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client/Engineer in Charge |
| 23 | Supply & Laying with the best quality approved Linoleum or Sports Flooring over existing screed flooring as per site condition. Flooring plank of size 50 x 50cm 98% natural raw material as per the company specification. Marmoleum fixed using 414 Euroflex Lino Plus adhesive, applied with a 2mm x 6mm V notched or B1 trowel. Rate includes Proper subfloor preparation it must be level, clean, dry, temperature, and humidity control. Installation step step with one sheet at a time, Roll the sheet with a 68 kg roller to ensure proper bonding as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with Heat Welding or conventional method. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning finished surfaces, protection using plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client/Engineer in Charge |
| 24 | Supply & Laying with the best quality approved Engineered OAK Canyon Wooden Flooring of 12mm thk and 150 x 1200mm plank size in AC5 or AC4 grade with 2-3mm veneer and more susceptible to moisture and temperature changes. Fixed using tongue and groove method, use 2mm underlay best at density, tear strength, tensile strength, elongation at break, compressive strength, and water absorption. Rate includes accessories like Skirting, end profile, door profile, transition profile, reducer etc. use plank of size not less than 120 x 20cm after proper treatment for moisture, pest control, curing etc. Rate includes Proper subfloor preparation it must be level, clean, dry, temperature, and humidity control. Pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints properly as per company standard specification. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning finished surfaces, protection using plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client/Engineer in Charge |
| 25 | Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for Staircase andRamp flooring of size not less than 1200 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (for surface contact of the bottom of the granite slab) as per approved pattern, including finishing the joints with matching shade, cement slurry, cutting, edge chamfering and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum/Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. |
| 26 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 27 | Supplying and fiting the sunken slab area by Broken bricks by adding CICO NO 1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer\"s specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc as complete with all respects complying with relevant standard specification and as directed by the Client/Engineer-in-charge Including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturer\"s specifications and as directed. |
| 28 | TERRACEWATERPROOFING:Supply and laying water proofing treatment for terrace covering the following order andconsisting of following operations.i) Making \" V \" grooves at the construction joints of size20 x 20 mm and filling the \"V\" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement.The roof slab / gutter slabshall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shallbe spread over the prepared surface On the spread mortar provide and lay 300 x 300mm Roof Cool Tile to a average minimum thickness of 15 mmwith proper slope. Side with 150mm with use of cement mortar with water proofing compound. |
| 29 | Providing and laying water proofing treatment to vertical and surfacesfor sunken portion of depressed portions of W.C.,and the like consisting of :i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontalsurface. ii) IInd course of 20mm cement plaster 1:2 (1 cement : 2 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) |
| 30 | Providing of 35mm thick factory made pre-laminated WPC Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam WPC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated WPC sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work |
| 31 | Providing & fixing of Factory made Flush door shall be of 35.0mm Commercial grade flush door with 1.0mm lamination on both the sides, and central portion to have 8.0mm plain float glass to be fixed with help of teak wood beadings. The Door is to be fixed to existing wooden partition/wall with heavy duty 5\" Stainless Steel hinges, and shall have godrej Or equivalent mortice lock. All the edges of the door to be covered with 35 x 12 mm Teak wood beadings, The cost shall include Frame of 1st class Teak wood Frame of 150mm x 50 mm, all labour, materials, mortice lock, tower bolt inside, door stopper, Door Closer strictly as per the given design & drawing etc complete. |
| 32 | Providing and fixing at site 12.0mm toughened glass fixed glazing to be fixed with SS patch fittings at the site including filling of siliconsealant at all edges, gaps, wherever necessary as per the site condition, all materials, labour etc complete. |
| 33 | Providing and fixing of 12mm toughened glass door with 18\" long SS handles, floor spring (Ozone-FS- 9400) etc, locking arrangement of brass make at top of standard make(patch fitting), including fixing of Frosted strip vision film as directed by the EIC. |
| 34 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 35 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 36 | Providingandfixing welded M.S. grills to the window openings,along the details as per drawingwith necessary screws, bolts andfixed withnecessaryM.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge |
| 37 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of anti corrosive enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.) |
| 38 | Supply and fixing of signage board at required places of specified size,directed by the departmental engineer in charge,the rate is inclusive of all labour charge, fixing and transportation etc.complete.Supplying and fixing 3mm thickness ACP with MS frame acrylic glowing pilon model signage of size 6\"x3\" in side fixing the LED lights and Transformer |
| 39 | supplying and fixing 6\"x6\" MS square pipe with ACP CNC cutting direction signage at height 72\" |
| 40 | Supplying and fixing 6mm thickness acrylic laser cutting letter with MRF power coated signage for Toilet, Changing room. |
| 41 | ACP Cladding - elevational treatment |
| 42 | FireExtinguisherSupply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers. - SOR - BD 950 |
| 43 | Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT- SOR - BD 991 |
| 44 | LANDSCAPELandscaping Plantation workSupplying and Planting washingtonia palm7\"-8\" feet height with necessaryearth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge |
| 45 | Supplying and Planting kentia palm7\"-8\" feet height with necessaryearth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge. |
| 46 | Supplying and Planting Tabernum 2\" feet height with necessaryearth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge. |
| 47 | Supplying and Planting Spider lillybushywith stalking including cost of the Plant, transport and labour charges etc all complete. |
| 48 | Supplying and Planting Jatropha2\" feet height with necessaryearth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge. |
| 49 | SCHEDULE -B INTERIOR WORKSupply Providing and fixing GYPSUM BOARD FALSE CEILING in levels as per the detailed drawing - made up of G.I frames as specified by Gypsum India/Saint -Gobain Gyproc and 12mm thick Gypsum board with suitable suspenders fixed to the ceiling. Ceiling section, perimeter channel of size 20X27X30 mm and 0.55 mm thick for light fittings, AC Grills, diffusers, suspenders etc. shall be standard sections supplied by Gypsum India/ Saint Gobain. Spacing of intermediate channels shall be at 1200 mm c/c and ceiling section at 457 mm c/c. The work includes taping and jointing, applying primer, two or more coats of plastic emulsion paint of approved shade ICI/ ASHIAN PAINTS make, making cut-out for light fixtures /fittings, etc. The Final coat shall be done with FOAM ROLLER and no brush marks should be visible. Providing of perimeter channels / beading etc. as per drawing complete in all respects.(All measurement in sqft only and finished surface area shall be measured) |
| 50 | 24\"x24\" Grid False Ceiling Providing and fixing in the true horizontal level false ceiling system of Armstrong world industries. The suspension system shall be the Armstrong Trulock Silhouette revealed profile grid system with 15mm wide flanges incorporating a 3mm or 6mm central recess color black or white revealed Silhouette main runners and cross tees to have mitered ends with birds mouth notches to provide mitered cruciform junctions. Main runners to be spaced at 12mm c/c fixed by using 2mm pre straightened GI Wire.Main tee, rotary stitched of size 15mm x44mmx3600mm at every 1200mm c/c maximum and 1200mm cross tee of size 15mmx44mm x1200mm at every 600 mm c/c maximum and 600mm c/c cross tee of size 15 mm x 44 mm x 600 mm at every 1200mm c/c maximum and 19mmx19mmx3000 wall angle. All as per the design and instructions Architects (make- Armstrong & thikness of tile- 16 mm) |
| 51 | Wooden Rafter - 6\" x 4\" Providing and fixing in the true horizontal level Wooden Rafter made of 19mm Ply finished with 1mm Laminate of approved shade color and texture, The suspended Rafter fixed to the gypsum ceiling using necessary screw and 38mm support ply fixed on to the true ceiling. Rate includes all necessary materials, labours, transport, scaffolding, etc complete. |
| 52 | Wave Fabric Ceiling - 12\" x .5\" Providing and fixing in the Waved shaped Fabric ceiling made of non-woven material with high fire and moisture resistance characteristics fabric of any type fixed using z-clip on to the true ceiling. Rate includes all necessary materials, labours, transport, scaffolding, etc complete. |
| 53 | Wooden Wall Panel - Supply and Fixing of Laminated wall Panel made of 12mm ply finished with 1mm laminate on visible surface. !2mm Ply is supported using 19mm ply fixed on to the wall. Plywood should be of phenol bonded, BWR grade Anti-termite proof and best quality, Non visible surface of the ply is finished with Wood primer. Screw holes is covered using same laminate buttons. Rate includes all support ply, Cove Provision, adhesive, shifting of materials, transport etc complete. |
| 54 | Window Pelmet : Supply & fixing of Window Pelmets made out of 19mm thk Ply finished with approved laminate shade. Rate includes all support ply, Cove Provision, adhesive, shifting of materials, transport etc complete. |
| 55 | Sheer Curtains : Supply & fixing of Main & Sheer curtains of approved shade & colour fabric with all necessary fittings. Rate includes all necessary hardwares like hinges, handles etc, labour, material, lead shifting etc complete. |
| 56 | Floating POD Structure - Supply and Fixing of 50mm x 50mm MS Power coated Section with 600mm spacing on both the direction, Internal section are of 50mm x 25mm. Edges of the Frame curved to 9\" Radius as per the architectural drawing and 3d. MS Frames are covered with 12mm Bison board fixed usign non corrosive screws.12mm Charcoal Fluted panel fixed using headless screw and adhesive on to the bison baord. Pod is Floated up by 75mm using MS Support. All MS are proper treated and black power coated. Rate incldues all material, labour, fabrication, power coating, fluted panel, transport, shifting of materials etc complete. Costing purpose area will be in cum of the pod size. POD Size External Measurement -(4000 x 2400 x 2400 mm (ht) ) |
| 57 | Floating POD Seating:Supply and Fixing of 50mm x 25mm MS Power coated Section with 600mm spacing on both the direction, Internal section are of 25mm x 25mm. Structure welded to the POD Structure. Ms Frameare covered with 12mm Bison board fixed using non corrosive screws.12mm HDMR Fluted panel fixed using headless screw and adhesive on to the bison baord. Fluted panel is finished with melamine matt polish. All MS are proper treated and black power coated. Rate incldues all material, labour, fabrication, power coating, fluted panel, Polish transport, shifting of materials etc complete. Costing purpose area will be in Sqm of the Seating Area. |
| 58 | Curved Seating Top Panel/Covering:Supply and Fixing of 25mm x 25mm Aluminium Section with 600mm x 1200 spacing on both the direction, as per the dseign and curved structure. Al Frame are covered with 4mm Bison board fixed using non corrosive screws 4mm Bison board finished with duco paint as per the 3D. Color and finish as per the choice of EIC. Rate incldues all material, labour, fabrication, Duco Paint, transport, shifting of materials etc complete. Costing purpose area will be in Sqm of the plan Area. |
| 59 | Curved Seating 1:Supply and Fixing of Curved Seating 1 as per the architectural drawing and 3d view. Curved seating 1 is made of ply boxing finished with 4mm veneer. Veneer finished with melamine matt polish. Veneer is fixed on to the ply boxing on all visible surface and on all internal durface ply finished with paint and primer. Back rest is of 25mm x 25mm wood bent as per the drawing. Wood finished with mealamine matt polish. Rate incldues all material, Labour, Polish, support work, transport, shifting of materials etc complete. |
| 60 | Curved Seating 2:Supply and Fixing of Curved Seating 2 as per the architectural drawing and 3d view. Curved seating 2 is made of ply boxing finished with 4mm veneer. Veneer finished with melamine matt polish. Veneer is fixed on to the ply boxing on all visible surface and on all internal durface ply finished with paint and primer. Back rest is of 19mm Ply finished with 4mm veneer on all 3 sides as per the drawing. Rate incldues all material, Labour, Polish, support work, transport, shifting of materials etc complete. |
| 61 | Boat Shaped Ceiling Panel :Supply and Fixing of MS Gold Power Coated boat shaped ceiling using 25mm x 25mm MS Square section as per the architectural drawing and 3d view. End Profile of the boat shape is of 50mm x 25mm Section with Welded Mesh on top finished with black power coated. With seating arrangment. All necessary support from the floor is of 25mm x 25mm MS Gold power coated section acting as column as per the drawing. Rate includes fabrication, power coating, fixing at site, labour, material, lead shifting etc complete. |
| 62 | Buffet Counter :Supply and Fixing Buffet Counter carcase made of 19mm Ply finished with .8mm Laminate of approved shade color and texture. Buffect counter Shutter made of 19mm HDMR finished with Duco paint, color as per the architectural choice. Top finished with 20mm Granite with proper edge polish, chamfering, nosing and double facia of 40mm. Rate includes all necessary hardwares like hinges, handles etc, labour, material, lead shifting etc complete. |
| 63 | Dining Table :Supply and Fixing dining table made of 19mm Ply finished with .8mm Laminate of approved shade color and texture. Top finished with 12mm Toughened with proper edge polish, chamfering, nosing. Bottom finished with teak wood veneer with melamine polish. Rate includes all necessary hardwares like hinges, handles etc, labour, material, lead shifting etc complete. |
| 64 | Dining Chair :Supply and Fixing dining chair with made of Teakwood with natural polish. With cushion fabrics of high quality and density. Rate includes all necessary hardwares like hinges, handles etc, labour, material, lead shifting etc complete. |
| 65 | Wooden Ceiling : Supply & Fixing of Hexagon Shaped wooden plank ceiling with necessary rigid support. Wooden planks finished with melamine polish finish. Rate includes all necessary hardwares like hinges, handles etc, labour, material, lead shifting etc complete. |
| 66 | Library Book shelves :Supply and Fixing Open Library Book shelves carcase made of 19mm Ply finished with 1mm Laminate of approved shade color and texture. Internal Angled shelves made of 19mm Ply finished with 1mm Laminate. Rate includes all necessary hardwares like Screws, joint pin etc, all Material, Labour, lead shifting etc complete. |
| 67 | Librarian Table: Supply and Fixing Librarian Table and credenza unit carcase made of 19mm Ply finished with .8mm Laminate of approved shade, color and texture. Table top finished with 1mm Laminate with double thick facia. Modesty panel finished 1mm laminate fixed using ebco accessories. Rate includes all necessary hardwares like Keyboard tray, CPC Trolley, Hinges, Telescopic Channel, Screws, joint pin etc, all Material, Labour, lead shifting etc complete. |
| 68 | Library Study Table : Supply and Fixing Library study Table of Size 3\"0\" X 3\"0\"made of 19mm Ply finished with .8mm Laminate of approved shade, color and texture. Table top finished with 1mm Laminate with double thick facia. With MS powder coated support with adjustable. Rate includes all necessary hardwares like Screws, joint pin etc, all Material, Labour, lead shifting etc complete. |
| 69 | Library Study TableChairs : Supply and Fixing Library study Table chairs, made out of teak wood with Fabric cushion with high density. Rate includes all necessary hardwares like Screws, etc, all Material, Labour, lead shifting etc complete. |
| 70 | Duty Free Shop Display Rack: Supply and Fixing Display Rack carcase made of 19mm Ply finished with 1mm Laminate of approved shade, color and texture. Shutter made of Black profile channel with 5mm Clear Glass. Rate includes hardwares like track, profile handles all Material, Labour, lead shifting etc complete. BR. Laminate 1400 Rs |
| 71 | Duty Free Shop Display Open Rack: Supply and Fixing Display Rack carcase made of 19mm Ply finished with 1mm Laminate of approved shade, color and texture. Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. BR. Laminate 1400 Rs |
| 72 | Duty Free Shop - Help Desk / Billing Counter: Supply and Fixing Help Desk Table carcase made of 19mm Ply finished with 1mm Laminate of approved shade, color and texture. Counter Front finished with 12mm charcoal Louvers Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. |
| 73 | Reception - Reception Desk : Supply and Fixing Recetpion Table finished using 20mm Marble over 50mm Aluminium Section at all visible areas. On all internal surface finished with 1mm laminate over 19mm ply. Laminate as per the architect choice. handwriting projectionare also finished with Marble and 1mm laminate, 75mm Base of the Table is projected as per the design with cove provision. Rate includes Acrylic Letters with back lit, Flexi ply, Flexi laminate, hardwares like channel, Hinges, kyboard tray, trolley, screw, adhesive all Material, Labour, lead shifting etc complete. |
| 74 | Reception Sofa Seating : Supply and Installation of 3-Seater Sofa with combination of wood & fabric of approved finish & design. Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. |
| 75 | Reception Sofa Seating : Supply and Installation of Single Seater Sofa with combination of wood & fabric of approved finish & design. Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. |
| 76 | Reception Center Table : Supply & Fixing of center table made out of quartz Top with MS powder coated with necessary support. Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. |
| 77 | RaisedFlooring - Reception : Cost towards Raised Flooring using power coated MS Section fixed on to the floor finished on top with 20mm Polished Marble. Rate includes Scove provision, adhesive, screws etc complete. |
| 78 | Texture Paint - Reception : Cost towards NS402 Medium Grey Concrete stone finished texture on to wall over 15mm punning. Rate include preparation of the surface, Cleaning etc complete. Rate includes covering the electrical plates, protection of flooring etc complete. |
| 79 | Lounge cum dining - Help Desk / Billing Counter: Supply and Fixing Help Desk Table carcase made of 19mm Ply finished with 1mm Laminate of approved shade, color and texture. Counter Front finished with 12mm charcoal Louvers Rate includes hardwares like screw, adhesive all Material, Labour, lead shifting etc complete. |
| 80 | Conference Room - Conference Table: Supply and Fixing Conference Table, Top finished with 20mm Quartz over 19mm Ply, Double stone facia with Edge chamfered and recessed by 20mm. bottom portion19mm ply finished with .8mm Laminatge on both sides. Rate includes flip flop box, Vertibrae, Labour, all lead transport, Shifting etc complete. |
| 81 | Conference Room - Conference Room Chairs : Supply and Fixing Conference room chairs. Rate includes flip flop box, Vertibrae, Labour, all lead transport, Shifting etc complete. |
| 82 | GYM EQUIPMENTS:Supply & Fixing of Fitline Ultra Treadmill as per manufacturer specifications. Rate includes Labour, all lead transport, Shifting etc complete. Supply & Fixing of Wattbike pro cycling quipment as per manufacturer specifications. Rate includes Labour, all lead transport, Shifting etc complete. Supply & Fixing of All in one trainer OX Pro as per manufacturer specifications. Rate includes Labour, all lead transport, Shifting etc complete. Supply & Fixing of dumbell sets as per manufacturer specifications. Rate includes Labour, all lead transport, Shifting etc complete. |
| 83 | Supply & Fixing of 6\"0\" Length & 2\"0\" depth 1\"6\" height Seating Bench with wooden legs as per the approved designs. Rate includes Labour, all lead transport, Shifting etc complete. |
| 84 | PLAYING EQUIPMENTSnooker Table : Supply & Fixing of Snooker table with full-size, tournament-spec table is 12ft in length, and just over 6ft wide. For those without the space for a full-size table, Rate includes Labour, all lead transport, Shifting etc complete. Supply & Fixing of international table tennis table has a rectangular playing surface 2.74 meters (274 cm) long and 1.525 meters (152.5 cm) wide, 76 cm above the floor. The surface must be a dark, matte color and yield a consistent 23 cm ball bounce from a 30 cm drop height. The table has a white side line (2 cm wide) and an end line (2 cm wide) on each side, and a 3mm wide white center line divides each half for doubles play. |
| 85 | Supply & Fixing of 6\"0\" Length & 2\"0\" depth 1\"6\" height Seating Bench with wooden legs as per the approved designs. Rate includes Labour, all lead transport, Shifting etc complete. |
| 86 | SCHEDULE -C PLUMBING WORKSSupplying & fixing in position 15 mm dia brass/ C.P screw down / C.P Pillar Tap(Heavy duty) of approved make conformingto I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use onthe work).15mm dia CP Pillar Tap (IWC) |
| 87 | Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with PVC Fissser, Metal clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works.(Above Ground Level) (Internal Water supply)20mm Dia Cpvc Pipes |
| 88 | 25mm Dia Cpvc Pipes |
| 89 | Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification.(Internal,External&Rain water system)110mm Dia |
| 90 | 75mm Dia |
| 91 | Part B-WATER SUPPLY SYSTEM ( PIPES & VALVES)Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height.(Internal,Terrace&External Water supply )32 mm Dia Upvc Pipe |
| 92 | 40 mm Dia Upvc Pipe |
| 93 | Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves( Heavy type ) withI.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading ofPipes etc., complete complying with standardspecifications for both internal & external water supply arrangements.32 mm Dia |
| 94 | Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. -Internal Toilet Entry & Terrace 32 mm dia |
| 95 | Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table’E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER /EQUIVALENT. - Quotation 32mm dia |
| 96 | Supplying & fixing in position C.I.Nahini trap /Floor trap of varioussizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly limeconcrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) includingdismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the PVC pipes asdirected etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ). |
| 97 | Supplying and fixing Back Inlet Urinal(white colour) with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia \"B\" Class PVC Waste Water Pipe, 15mm dia Nylon Connection, 15mm diaBrass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. |
| 98 | Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with \"P\" trap or \"S\" trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipescement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. |
| 99 | Supply and fixing in position whiteEuropean Water Closet with Soft close double flapped seat cover, pan connector with comprising the P- trap/\"S\" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directedby the Departmental officers |
| 100 | Wash Hand Basin of size565 x 425 x 140 mm with all accessories such as 32 mm Dia C.P. Waste coupling, Rubber plug, Bottle Trap, Silicon, White Cement etc. |
| 101 | Supplying and fixing in position Mirror of size 750x450mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work |
| 102 | supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern departmentEngineer before use on work. |
| 103 | Supply , installing, Testing & commissioning 15mm nominal bore CP brass angle valve of approved make or equivalent as directed by the Engineer-in-charge. |
| 104 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 105 | Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 106 | PUMPS - UG SUMP TO OHTSupply, erection testing and commissioning of electric driven pump,The pump is with cast iron casing high efficiency with bronze impeller with supply conditions 400v 3 phase 50 Hz with all accessories like standard coupling guard, common base plate,foundation bolts and connected civil works.2 Discharge of 2Lps (1 working ) with 2 horse power motor with total head of 10-15 MWC |
| 107 | 3 phase panel board including labour charges |
| 108 | Supplying , Installing, Testing and Commisioning of MS powder coated Electro plated / Electro galvanised Zinc coated steel collar clamps, U clamp, split clamp, etc. with EPDM rubber lining wherever applicable with necessary drilling holes to suit the insertion of pipe clamps, deburring etc. all complete, as per detailed drawing for supporting rain water pipes in pump rooms |
| 109 | Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on the pump capacity. The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 110 | Supply fixing, texting and commisioning of RO UV Water cooler with 120 ltr capacity of 3 faucet, 90 LPH Purification capacity, min 3 stage water purification. The rate includes the cost of Material, labour charges, loading & Unloading and Transportation charges etc., complete and as per the standard specification. |
| 111 | SCHEDULE D-KITCHEN WORKSSupply & Installation of Kitchen necessary equipments as per the drawing. With the provision of Exhaust ducting, gas pipeline and gas bank Complete in all aspect. Rate inclusive of all transport, loading & unloading etc. |
| 112 | SCHEDULE E- ELECTRICAL WORKSMetering Panel- Supply, Installation, Testing and Commissioning all metal floor mounted meter board incorporated with the following. The cost of the foundation channels shall also be including in the rate. The Cost shall also includes unloading and positioning.3Nos.250Amps TP cutouts with 200Amps neutral link propoersly fixed on the sheet steel with necessary accessories with 200Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing.Space for fixing 6Nos of direct operated three phase energy meter with necessory accessories.3Sets of 3Nos. 32A TP cutout with neutral link properly fixed on the sheet steel.1Set of 3Nos. 200A TP cutout with neutral linkls propoerly fixed on the sheet steel.3Sets of interconnection between the coutout,MCB and the Meter shall be dobne with 50Sq.mm Cu and 16Sq.mm.Cu PVC insultated strandard copper conductor wires with crimped type lugs / sockets, etc.RYB indicating Lamps of LED Clustered type and Control toggles switch per each phase shall be provided for the Main EB cut-out chamberdoor.CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others.Foundation Channel - 3mm thickCable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel. ( Rate as per quotation ) |
| 113 | Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no 250A Four Pole Change Over Switch, Main 1no EB source Incoming 250A 4Pole MCCB and Main 1no DG source Incoming of 250A 4Pole MCCB\"s, and 1no 125A 4Pole MCCB, 3nos of 63A 4Pole MCCB\"s for O/Gwith suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The rate is inclusive of transportation charges etc complete.The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete. |
| 114 | Supply and fixing of 12 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.125A 4P MCCB switch as incoming and 4 nos.63A 3P MCB, 5 nos.32A 3P MCB, as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End. |
| 115 | Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB). |
| 116 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (SD-617 ) |
| 117 | Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and6Nos of 10A SP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection onlyThe MCB DB and MCB\"s should be with ISI mark. ( Like MDS / Legrand make )(SD-167) |
| 118 | Supply and Clamping of31/2C x 70 Sq.mm PVC armoured LTUGaluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-225) |
| 119 | Supply and Clamping of2C x 10 Sq.mm PVC armoured LTUGaluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-216) |
| 120 | Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection ( SD - 189) |
| 121 | Supply and fixing of brass cable gland for 2Cx 10 Sq.mm PVC LTUGarmoured cable with earth connection ( SD - 182) |
| 122 | Supply and providing cable end termination of 31/2C x 70sq.mm Aluminium LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (SD-238) |
| 123 | Supply and providing cable end termination of 31/2C x 70sq.mm Aluminium LUG |
| 124 | Supply and providing cable end termination of 31/2C x 70sq.mm Aluminium gland |
| 125 | Supply and fixing of300 mm (12\") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories. (SD 114) |
| 126 | Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter.Primary light points including the cost of 5A switch |
| 127 | Secondary light points looped from the above point |
| 128 | 5A plug point as primary point independent mounted on wall/ partition / on work station, etc. |
| 129 | Wiring with 2R x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories withModule GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Light / Fan point.(6Points / Coil) Lower end (SD 314) |
| 130 | Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour. |
| 131 | Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe in wall and ceiling with continuous earth wire connection 1 of2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour. (SD-430) |
| 132 | Supply and fixing of25A DP plug and socket in the sheet enclosure with 25A DP MCB in flush with wall with earth connection.(For AC Plug) |
| 133 | HVACProviding and fixing of Air conditioner including design with detailed analysis on heat load and other parameters. The Air conditioners shall be aesthetically designed with good energy efficiency. The air conditioners condenser and evaporator shall be of copper and the air conditioners shall be energy efficient (inverter). All the basic features including remote settings shall be made available. The air conditioners shall be supplied and installed with all necessary accessories (stand, connecting tube, extendable copper tubes, interconnecting wiring arrangement, drain tubes, insulation materials, etc). The cost including for all the required materials for complete electrical works, duct/drainage arrangements, fitting charges, labour, transport etc.The AC of Toshiba Cassette AC shall be installed with all necessary accessories with VRF system. Multiple High Efficeint/COP Variable Refrigerant Flow/Volume Condensing Units with Variable Speed Compressor total capacity not less than as indicated below with required microprocessor Control including Safety Controls suitable with eco friendly R410A as refrigerant - 18 HP Nos |
| 134 | Supply and Installation of common 30KVA capacity Automatic Voltage Stabilizer for all slit AC with time delay relay.(Make : V-Gaurd or equvalent ) |
| 135 | Supply and Laying of 5/8\" and 3/8\" Copper pipe.(SR 2023-24, Pg.no. 154, It.no. XIV, M-1990) |
| 136 | Supply and fixing of MS stand for fixing outdoor unit |
| 137 | Supplying and concealing modular type RJ 45 and RJ 11 socket with top pin with suitable with concealed type manufacturer\"s GI metal back box andmodular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour. |
| 138 | Supply and laying of following size PVC/ MS conduits in floor /wall/ ceiling etc. including necessary bends, elbow, etc, inconcealed system below the false ceiling on wall / floor and open system on above falseceiling. (for general purpose & forwork station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface etc., |
| 139 | Supply and fixing of 9W LED 4000 K Roundtype recessed lighton wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 140 | Supply and fixing of 15W, 4000K Round type recessed fitting on false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 141 | Supply and fixing of 15W, 4000K cylindrical type fitting with LED Down lighton false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 142 | Supply and fixing of 20W, 4000K cylindrical type fitting with LED Down lighton false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 143 | Supply and fixing 4000K Modern chandilier type fitting on false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 144 | Supply and fixing 4000K Modern chandilier type fitting on false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 145 | Supply and fixing 4000K Modern Pendant type fitting on false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 146 | Supply and fixing 4000K Round Profile Modern Pendant type fitting on false ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 147 | Supply and fixing 4000K Profile Light with 220 count LED strip fiting on false ceiling as cove light with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. |
| 148 | Supply and fixing 4000K Track Light with fittings of LED adjustable fiting and to complete necessary accessories and etc to complete the work. |
| 149 | Supply, installation, testing and commissioning of 20 W LED tube light fitting with cool day light made out of CRCA powder coated body, poly methyl meth acrylate (PMMA) diffuser, glare free light, Suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories etc., complete. |
| 150 | Supply and installation of chemical Earthing with earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia \"B\" class G.I. pipe Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements: (with 2 bags of 40 KG chemicals) |
| 151 | The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates,materials.The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc.The rack shall have suitable cable clamping arrangements etc.\"Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements.The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix/ perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be providedat not more than 2 mtr center to center and as per site requirement )150 x 50mm Perforated Tray |
| 152 | SupplyandinstallationmaintenancefreeCopperEarthingSystem comprising of 30mm dia and 3 mtr. long earth electrode with chemical filling. |
| 153 | Supply and Run of 8mm Copper Round Conductor complete as necessary clamps / supports on wall / floor / ground for earth connection |
| 154 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. ( SD-233) |
| 155 | Supply, fabrication, of Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., 50mm x 6mm GI Flat |
| 156 | CCTV Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 2nos with 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output HDMI1 / VGA1 outputs provided HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony). |
| 157 | Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5\" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°,●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)(Rate as per quotation enclosed) |
| 158 | Supply, Installation, Testing and Commissioning of 55\" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). (Rate as per quotation enclosed) |
| 159 | Supply and fixing of outdoor 4 x 6PVC box with 102mm x 77mm x 102mm with all fixing accessories. (Rate as per quotation enclosed) |
| 160 | Supply and Laying of CAT 6 cable in PVC conduit pipe below the ground complete with all necessary accessories etc.. |
| 161 | Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. |
| 162 | Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. |
| 163 | Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack. |
| 164 | Supply and Instalatin for 6 KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 1/2 Hours back up. |
| 165 | Supply, Erection of 6mLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. |
| 166 | PA SYSTEM - Supply, Installation,Testing & commisioning of 30 wattshigh efficiency, high fidelity, long throw IP65 weather proof P.A Music speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:AhujaAMH402T/Bosch or its equivalent) |
| 167 | Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000/Bosch or its equivalent). |
| 168 | Supply, fixing & Testingof10\" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent) |
| 169 | Supply and run of 2core 1.5 Sqmm Un armoured speaker cable with 25mm PVC pipes concealed wall and ceiling etc. complete. |
| 170 | Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & Player / Recorder confirms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth. |
| 171 | Safety Accessories 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS |
| 172 | First Aid Box complete with all First Aid Medicines |
| 173 | Shock Treatment Chart fixed in glass frame |
| 174 | Hand Gloves 11KV Grade |
| 175 | Danger Board as required by the Electrical Authorities |
| 176 | SCHEDULE -F LIFT WORKSSupply & Erection of Passenger Lift (6 Persons) as per Johnson Lift\"s Specification (Model : Sukranti) (304 or 316 Grade) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
